http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Xin Qi,Xin Li,Yannan Liang,Hainan Wang,Wei Guo,Xingshun Cong,Fakui Lv,Haijun Zhang 한국공업화학회 2020 Journal of Industrial and Engineering Chemistry Vol.87 No.-
Flotation is an important method to remove the inorganic sulfur from coal. Its effect depends on thedifference in adhesion between coal and pyrite to air bubbles andflotation reagents. In this study, theinterface properties of coal powder/plate and pyrite powder/crystals were investigated using acomprehensive approach combining wetting process, induction time, contact angle, and X-rayphotoelectron spectroscopy. The experimental results show that the spreading and adsorption speedof diethyl phthalate on pyrite crystals and powder is close to that on coal surface in the air. However, theadsorption rate of pyrite to water is much higher than that of coal. In aqueous environment, it is difficultfor diethyl phthalate to spread on pyrite crystals, especially in alkaline solution. The difference ofhydrophobicity between coal and pyrite at air–water interface is smaller than that at oil–water interface. The adhesion of air bubble and reagent droplet on three pyrite facets is also different. The oxidation ofpyrite {100} is faster and greater than that of {210} and {111} facets in alkaline solution, which is beneficialto the coal desulfurization. Thesefindings disclose the hydrophobicity/oleophilicity and structure-reactivity dependence of pyrite in theflotation.
An improved SCGM(1,m) model for multi-point deformation analysis
Qi-jie Wang,Chang-cheng Wang,Rong-an Xie,Xin-qing Zhang,Jian-jun Zhu 한국지질과학협의회 2014 Geosciences Journal Vol.18 No.4
Considering the deformation of discrete monitoringpoints within the same deformable body usually have similar physicalproperties and tend to undergoing identical dynamic process, jointmodelling of the deformation processes of these points in time domainare expected to generate better results. Yin et al. (1997) first extendedthe multi-variable grey model-system cloud grey model SCGM(1,m),with obviously superior modelling mechanism than single-variablegrey model, to multi-point deformation modelling. However, thismodel is still not widely recognized and its applications remain verylimited in the field of deformation analysis. The objective of this studyis to demonstrate the capability of the SCGM(1,m) model, to presenttwo revisions to further improve the performance of the model andto draw more attention to the community of deformation analysis. We first introduce the principles of the SCGM(1,m) model in theanalysis and prediction of deformation surveys. Two practicaltechniques, namely residuals re-modelling and linear regressionadjustment, are then presented to improve the SCGM(1,m) model. Combined with slope monitoring data, the modelling with the originaland the improved SCGM(1,m) models by residuals re-modellingand linear regression adjustment are illustrated. The mean relativeprediction errors decrease from 5.89% to 3.54% and 2.69%, whenthe two refining techniques are applied, respectively, indicating relativeimprovements of 39.9% and 54.3%.
Xin Wang,Xin Zuo,Jianwei Liu,Huaqing Liang,Qi Pan 제어로봇시스템학회 2016 제어로봇시스템학회 국제학술대회 논문집 Vol.2016 No.10
This paper is concerned with the robust discrete-time control for uncertain time-delay systems with nonlinearities and external noises. The parameter uncertainties enter into all the system matrices. The time-varying delay is unknown with given lower and upper bounds. The stochastic nonlinearities are described by satisfying a class of α Hölder condition. The problem addressed is the analysis and design of a stable controller such that, for all the parameter uncertainties, time-delay, stochastic nonlinearities and external noises, the resulting closed-loop system is exponentially stabile. The controller gain can be got by linear matrix inequalities (LMIs). Numerical examples are given to illustrate the effectiveness and verify the proposed theoretical results.
Xin-Qi Wang,Wei Sun,Lintao Wang,Shi-Hu Liang,Xiao-Kai Mu 대한기계학회 2023 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.37 No.6
An asymmetric modification method for the roller profile was proposed to address the bias load effect of rollers in the main drive bearing of a large roadheader. A contact mechanics model of the bearing was solved, and line contact theory was used to explore the effect of combined load and convexity on the bias load effect. The contact stress was found to be asymmetrically distributed along the contact line. This trend tended to be remarkable with the decrease in axial load or the increase in overturning moment. Symmetrically modified rollers can be used to improve the bias load effect by increasing convexity. However, this process led to the contact stress concentrating in the roller center. The influence of the design parameters for asymmetric modification on the roller profile and the contact stress was considered. The ideal design parameters were determined by using a genetic algorithm. The contact condition and fatigue life were remarkably increased.
Prevalence and Genotype Distribution of Human Papillomavirus among Women from Henan, China
Wang, Xiao-Chuan,Sun, Liang-Qi,Ma, Li,Li, Hua-Xin,Wang, Xiu-Li,Wang, Xin,Yun, Tian,Meng, Nian-Long,Lv, Da-Le Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.17
Human papillomavirus (HPV) infection has been implicated as a causative of cervical cancer. In the present study, a total of 578 samples from females attending the gynecological outpatient clinic in Henan province, China, were collected and the HPV genotypes were detected by gene chip and flow-through hybridization. Overall, 44.5% (257/578) females were found to be HPV DNA positive, and the high risk HPV (HR-HPV) rate was 35.1% (203/578). The first peak of HR-HPV infection appeared in the >60 year-old group (55.0%), and the second was within the 51-55 year-old group (50.0%) (${\chi}^2$=19.497, p<0.05). HPV 16 was the most prevalent genotype (9.2%), followed by HPV 52 (7.8%), HPV 6 (6.9%), HPV 11 (5.9%) and HPV 42 (5.0%). The single type HPV infection was 30.4%, with the five majority prevalent genotype HPV 16 (16.5%), HPV 52 (14.3%), HPV 6 (12.6%), HPV 42 (8.6%), HPV 31 (5.1%). The multiple-type HPV infections were 14.0%, and HPV 16 was the most prevalent type (29.6%), followed by HPV 52 (24.7%), HPV 6 (22.2%), HPV 11 (22.2%), HPV 42 (17.3%) and HPV 39 (17.3%).
Effect of humidity on mechanical properties of dissolving microneedles for transdermal drug delivery
Qi Lei Wang,Jia Wei Ren,Bo Zhi Chen,Xuan Jin,Can Yang Zhang,Xin Dong Guo 한국공업화학회 2018 Journal of Industrial and Engineering Chemistry Vol.59 No.-
Dissolving microneedles (DMNs) prepared from soluble polymers has been being widely investigated as a safe and effective transdermal delivery system for drug and vaccine. Limited by the materials, the air humidity would probably affect the mechanical property of DMNs, which is essential for the effective needle insertions and drug delivery. In this study, four kinds DMNs prepared by polyvinyl alcohol, sodium hyaluronate (HA), chitosan and gelatin are studied on the mechanical strength and insertion ability under varying humidity conditions. Based on these investigations, we hope to provide the effective time of DMNs to ensure a successful insertion and drug delivery.
Utilization of electron beam to modulate electron injection over Schottky barrier
Qi Zhang,Junjie Qi,Yunhua Huang,Huifeng Li,Xin Li,Ruoshui Wang,Yue Zhang 한국물리학회 2011 Current Applied Physics Vol.11 No.3
Modulation of electron injection over Schottky barrier was realized by employing electron beam irradiation on the metal/ZnO-nanowire contact. The structure revealed a good response to the illumination at a scanning frequency of 0.1 Hz, which can be enhanced by increasing bias and decreased with the increase of electron beam energy. These phenomena can be attributed to the Schottky barrier formed at the metal/ZnO-nanowire interface which limits the electron transport across the contact. The electron beam irradiation gives rise to high efficiency of electron injection over the barrier, while the interplay between charge discreteness, coherent scattering, and Coulomb interaction may reduce the conductivity.
Protective effects of phillyrin against influenza A virus in vivo
Xin-yan Qu,Qing-jun Li,Hui-min Zhang,Xiao-juan Zhang,Peng-hui Shi,Xiu-juan Zhang,Jing Yang,Zhe Zhou,Sheng-qi Wang 대한약학회 2016 Archives of Pharmacal Research Vol.39 No.7
Influenza A virus infection represents a great threat to public health. However, owing to side effects and the emergence of resistant virus strains, the use of currently available anti-influenza drugs may be limited. In order to identify novel anti-influenza drugs, we investigated the antiviral effects of phillyrin against influenza A virus infection in vivo. The mean survival time, lung index, viral titers, influenza hemagglutinin (HA) protein and serum cytokines levels, and histopathological changes in lung tissue were examined. Administration of phillyrin at a dose of 20 mg/kg/day for 3 days significantly prolonged the mean survival time, reduced the lung index, decreased the virus titers and interleukin-6 levels, reduced the expression of HA, and attenuated lung tissue damage in mice infected with influenza A virus. Taken together, these data showed that phillyrin had potential protective effects against infection caused by influenza A virus.