Applications of Magnetite Nanoparticles for Water Treatment and for DNA and Cell Separation

Nguyen Hoang Hai,Nguyen Chau,Nguyen Hoang Luong,Nguyen Thi Van Anh,Phan Tuan Nghia 한국물리학회 2008 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.53 No.3

Magnetic nanoparticles with a diameter of 15 nm prepared by using the coprecipitation method have been applied to enforce the sedimentation of the solid waste, to adsorb the arsenic ions in water, to increase the DNA concentration by using a magnetic eld for the electrochemical DNA sensor and to separate the helper CD4+ T cells to determine the number of the cells in blood. A combination of magnetic nanoparticles and alum makes the solid waste in water under a magnetic field aggregate a dozen times faster than under the gravity alone. A concentration of 0.1 mg/l of arsenic in water was reduced to a value lower than the permissible concentration of 0.01 mg/l after few minutes of stirring. The particles functionalized with 3-aminopropyl triethoxysilane were used to enrich the DNA of the Herpes virus, which extended the sensitivity of an electrochemical sensor down to a concentration lower than nM/l. The particles coated with fluorescent-labeled antiCD4 antibody were used to count the helper CD4+ T cells. The fluorescence signals of the particle/cell system were two times stronger than those of the uorescence antiCD4 cell system. This can be used for the treatment of an HIV-infected patient with a simple fluorescent microscope. Magnetic nanoparticles with a diameter of 15 nm prepared by using the coprecipitation method have been applied to enforce the sedimentation of the solid waste, to adsorb the arsenic ions in water, to increase the DNA concentration by using a magnetic eld for the electrochemical DNA sensor and to separate the helper CD4+ T cells to determine the number of the cells in blood. A combination of magnetic nanoparticles and alum makes the solid waste in water under a magnetic field aggregate a dozen times faster than under the gravity alone. A concentration of 0.1 mg/l of arsenic in water was reduced to a value lower than the permissible concentration of 0.01 mg/l after few minutes of stirring. The particles functionalized with 3-aminopropyl triethoxysilane were used to enrich the DNA of the Herpes virus, which extended the sensitivity of an electrochemical sensor down to a concentration lower than nM/l. The particles coated with fluorescent-labeled antiCD4 antibody were used to count the helper CD4+ T cells. The fluorescence signals of the particle/cell system were two times stronger than those of the uorescence antiCD4 cell system. This can be used for the treatment of an HIV-infected patient with a simple fluorescent microscope.

Some characters of bacterial cellulases in goats' rumen elucidated by metagenomic DNA analysis and the role of fibronectin 3 module for endoglucanase function

Nguyen, Khanh Hoang Viet,Dao, Trong Khoa,Nguyen, Hong Duong,Nguyen, Khanh Hai,Nguyen, Thi Quy,Nguyen, Thuy Tien,Nguyen, Thi Mai Phuong,Truong, Nam Hai,Do, Thi Huyen Asian Australasian Association of Animal Productio 2021 Animal Bioscience Vol.34 No.5

Objective: Fibronectin 3 (FN3) and immunoglobulin like modules (Ig) are usually collocated beside modular cellulase catalytic domains. However, very few researches have investigated the role of these modules. In a previous study, we have sequenced and analyzed bacterial metagenomic DNA in Vietnamese goats' rumen and found that cellulase-producing bacteria and cellulase families were dominant. In this study, the properties of modular cellulases and the role of a FN3 in unique endoglucanase belonging to glycosyl hydorlase (GH) family 5 were determined. Methods: Based on Pfam analysis, the cellulases sequences containing FN3, Ig modules were extracted from 297 complete open reading frames (ORFs). The alkaline, thermostability, tertiary structure of deduced enzymes were predicted by AcalPred, TBI software, Phyre2 and Swiss models. Then, whole and truncated forms of a selected gene were expressed in Escherichia coli and purified by His-tag affinity column for assessment of FN3 ability to enhance enzyme activity, solubility and conformation. Results: From 297 complete ORFs coding for cellulases, 148 sequences containing FN3, Ig were identified. Mostly FN3 appeared in 90.9% beta-glucosidases belonging to glycosyl hydrolase family 3 (GH3) and situated downstream of catalytic domains. The Ig was found upstream of 100% endoglucanase GH9. Rarely FN3 was seen to be situated downstream of X domain and upstream of catalytic domain endoglucanase GH5. Whole enzyme (called XFN3GH5 based on modular structure) and truncate forms FN3, XFN3, FN3GH5, GH5 were cloned in pET22b (+) and pET22SUMO to be expressed in single and fusion forms with a small ubiquitin-related modifier partner (S). The FN3, SFN3 increased GH5 solubility in FN3GH5, SFN3GH5. The SFN3 partly served for GH5 conformation in SFN3GH5, increased modules interaction and enzyme-soluble substrate affinity to enhance SXFN3GH5, SFN3GH5 activities in mixtures. Both SFN3 and SXFN3 did not anchor enzyme on filter paper but exfoliate and separate cellulose chains on filter paper for enzyme hydrolysis. Conclusion: Based on these findings, the presence of FN3 module in certain cellulases was confirmed and it assisted for enzyme conformation and activity in both soluble and insoluble substrate.

The extraction of lignocelluloses and silica from rice husk using a single biorefinery process and their characteristics

Ngoc Thuy Nguyen,Nhat Thong Tran,Tan Phat Phan,Anh Thu Nguyen,My Xuyen T. Nguyen,Nguyen Ngan Nguyen,Young Ho Ko,Dai Hai Nguyen,Tran T.T. Van,DongQuy Hoang 한국공업화학회 2022 Journal of Industrial and Engineering Chemistry Vol.108 No.-

While the efficient usage of biomass waste can significantly help in addressing environmental issues,there are only a few reports that discuss about processing such waste effectively at a low-cost. Such challengearises from the strong association between the components biomass. In this study, an abundantagricultural byproduct, rice husk (RH), was used as the starting resource. A simple biorefining processof alkaline peroxide treatment followed by acid precipitation and ethanol extraction was performed onRH to obtain cellulose, hemicellulose, lignin, and silica. The chemical structures, morphologies, andphysic-chemical properties of the separated components were identified through a wide range of characterizationapproaches. The final products obtained from of this process were (i) bundles of fiber-likecellulose with a fiber width of 6 mm and (ii) small particles of hemicellulose and lignin with nonuniformshapes. The lignocelluloses products had over 90 wt% carbon with 52.28% crystalline ratio. Meanwhile, the other products comprising hemicelluloses, lignin, and silica were amorphous. The outcomeof this study contributes to expanding and developing the simple and efficient conversion processof biomass waste into sustainable value-added materials. It is crucial to reduce the environmental impactby using renewable materials as the new building block resources for synthetic chemicals.

Access to Anti-smoking Information among School Children and its Potential Impact on Preventing Smoking Initiation: Results from the Global Youth Tobacco Use Survey (GYTS) 2014 in Viet Nam

Hoang, Van Minh,Kim, Bao Giang,Phan, Thi Hai,Trinh, Dinh Hoang,Doan, Thu Huyen,Luong, Ngoc Khue,Nguyen, Thuy Linh,Nguyen, Tuan Lam,Pham, Thi Quynh Nga Asian Pacific Journal of Cancer Prevention 2016 Asian Pacific journal of cancer prevention Vol.17 No.no.sup1

Scientific evidence on all aspects of smoking amongst youth is very important for designing appropriate interventions to reduce smoking among this vulnerable population. This paper describes current access to anti-smoking information among school children aged 13 to 15 years in Vietnam in 2014 and examines its potential impact on preventing smoking initiation. The data used in this paper were obtained from the 2014 Global Youth Tobacco Survey (GYTS) in Vietnam. Students were asked questions about their level of awareness of anti-smoking information from various sources in the past 30 days and about lessons in school regarding the dangers of tobacco use during the last 12 months. Those who have never smoked were asked "whether or not they thought about avoiding cigarettes because of health warnings on cigarette packages" and answers were analyzed in combination with data on access to anti-smoking information from other sources. The prevalence of exposure to antismoking campaigns was high among school children in Viet Nam: 55.3% of current smokers reported thoughts of smoking cessation because of health warnings on cigarette packages; 60.5% of never smokers avoided initiating smoking because of the same health warnings. The potential impact of graphic health warnings to prevent school-aged children from smoking initiation would be stronger if there was concurrent access to anti-smoking programs on the dangers of tobacco use in schools. However, school education for tobacco prevention and control has not been as strong as expected. A more comprehensive school curriculum on tobacco prevention and control is recommended to reinforce antismoking messages among school children.

Raman spectroscopy of Cu doping in Zn_1−xCo_xO diluted magnetic semiconductor

Hoang, Luc Huy,Hien, Nguyen Thi Minh,Hai, Nguyen Hoang,Hai, Pham Van,Khoi, Nguyen The,Yang, In-Sang John Wiley Sons, Ltd. 2009 JOURNAL OF RAMAN SPECTROSCOPY - Vol.40 No.11

<P>The room-temperature ferromagnetism and the Raman spectroscopy of the Cu-doped Zn<SUB>1−x</SUB>Co<SUB>x</SUB>O powders prepared by the sol–gel method are reported. The x-ray diffraction (XRD) data confirmed that the wurtzite structure of ZnO is maintained for ZnO doped with Co below 10 at%. The magnetization–field curves measured at room temperature demonstrated that all Co-doped ZnO powders were paramagnetic. Ferromagnetic ordering is observed for the samples doped with Cu in Zn<SUB>0.98</SUB>Co<SUB>0.02</SUB>O and strongly depends on the concentration of Cu. The relative strength of the second-order LO peak to the first-order one in the Raman spectra, which is related to the carrier concentration, of the Cu-doped Zn<SUB>0.98</SUB>Co<SUB>0.02</SUB>O powder is strongly correlated with the saturation magnetic moment of the system. This seems to be in favor of the Ruderman-Kittel-Kasuya-Yosida (RKKY) or double exchange mechanism of the ferromagnetism in this system. Copyright © 2009 John Wiley & Sons, Ltd.</P> <B>Graphic Abstract</B> <P>The room-temperature ferromagnetism and the Raman spectroscopy data of Cu-doped Zn<SUB>1−x</SUB>Co<SUB>x</SUB>O powders prepared by the sol–gel method are reported. The relative strength of the second-order LO peak to the first-order one in the Raman spectra, which is related to the carrier concentration, of Cu-doped Zn<SUB>0.98</SUB>Co<SUB>0.02</SUB>O powder is strongly correlated with the saturation magnetic moment of the system. <img src='wiley_img/03770486-2009-40-11-JRS2295-gra001.gif' alt='wiley_img/03770486-2009-40-11-JRS2295-gra001'> </P>

Synthesis and Characterization of TiO₂ Nanoparticles by DC Thermal Plasma System

Nguyen Hoang Hai,Kyo-Seon Kim 강원대학교 환경연구소 2010 Journal of the Environment Vol.7 No.-

This study examined the synthesis of TiO₂ nanoparticles by direct current thermal plasma system at atmospheric pressure, using titanium tetra iso propoxide as titanium precursor. We investigated the effects of important process variables of flow rate of raw materials and supplied power on the particle composition, size and morphology by observing XRD and TEM measurements. The TiO₂ nanoparticles collected at the reaction tube have more rutile phase than anatase with the particle size around 250 ㎚.

Analysis on CO2 reforming of CH4 by corona discharge process for various process variables

Hoang Hai Nguyen,김교선,나소노바안나,나인욱 한국공업화학회 2015 Journal of Industrial and Engineering Chemistry Vol.32 No.-

The CO2 reforming of CH4 to syngas by corona discharge at atmospheric pressure has been investigatedfor various process variables. The experiments were operated systematically in wide regions of processvariables such as CO2/CH4 ratio, total flow rate, pulse frequency and applied peak voltage. Theconversions of methane and carbon dioxide increase with increasing the applied peak voltage or pulsefrequency and decrease with increasing the total flow rate. Selectivities of H2 and CO increase with theincrease of applied peak voltage, while increasing total flow rate and pulsed frequency does not affect H2and CO selectivities significantly

Controlling the Setting Time of Pavement Concrete Using Accelerating- Admixture by Silica Fume Technology

Nguyen Hoang Hai 한국도로학회 2018 한국도로학회 학술대회 발표논문 초록집 Vol.2018 No.05

This document gives a result of experiments on concrete using admixture Sikament® R4 combine with Sikacrete PP1. In developing countries, the development guides to build and set up a new infrastructure. In this case, the schedule of works is very important, which depends on the setting time of concrete structure. Specially, in tropical monsoon climate country, we need to use admixtures to increase the life time of constructions, especially concrete structures. Today, there are thousands of building, roads and bridges will be made. By using admixture, it not only helps to save the waiting time on the work site, but also increase quality of concrete structure. By using these good effects of admixtures, it’s necessary to find an optimal ratio of them in the mix design ingredient of concrete. The concrete strength can be controlled by changing a range of variety ratio of admixture in the mix design. This topic will find out the role of admixture and its relationship with the compressive strength of concrete.

A New Dimeric Lignan from the Stems of Willughbeia edulis

Nguyen, Hai Xuan,Do, Truong Nhat Van,Le, Tho Huu,Dang, Phu Hoang,Nguyen, Mai Thanh Thi,Nguyen, Nhan Trung The Korean Society of Pharmacognosy 2022 Natural Product Sciences Vol.28 No.2

As part of our continued study on the chemical constituents of Willughbeia edulis stems, a new dimeric lignan named edulignan (1) was isolated from its EtOAc-soluble extract. Based on NMR spectroscopic interpretation, the planar structure of 1 has been suggested to have two 2-substituted 4-chromanone subunits with different stereochemical configurations. In addition, the MS/MS analysis of the products obtained by acid-catalyzed hydrolysis of 1 was supportive of its structure. Unfornatually, the new compound 1 did not show 𝛼-glucosidase inhibitory activity with an IC₅₀ value > 250 𝜇M.

Carbon coated MFe2O4 (M=Fe, Co, Ni) magnetite nanoparticles: A smart adsorbent for direct yellow and moderacid red dyes

Hoang Vinh Tran,Hai Van Nguyen,Doanh Viet Vu,Thu Dieu Le,Binh Thanh Nguyen,Dang Hai Le 한국화학공학회 2022 Korean Journal of Chemical Engineering Vol.39 No.2

We report here a simple approach for synthesis of carbon coated magnetite (C@MFe2O4, M=Co, Ni, Fe) with shell@core nanostructured composites that we used as magnetic-nanosorbents for direct yellow (DYG) and moderacid red (RS) as pollutant textile dyes removal via an adsorption process. The synthesized C@MFe2O4 was characterized by TEM, SEM, EDX, XRD, FT-IR and VSM techniques. TEM results indicated that C@MFe2O4 nanocomposites have 20-30 nm of MFe2O4 nanoparticle core and 2-3 nm in thickness of the amorphous carbon shell. The synthesized C@MFe2O4 nanocomposites have the zero point charge (pHZPC) at 5.5, which suggests that DYG and RS, anionic dyes can be adsorbed onto the C@MFe2O4 nanosorbents in the acidic medium. Adsorption of DYG and RS onto magnetic nanosorbents was optimized and adsorption thermodynamic parameters were evaluated, clearly indicating that the adsorption of RS onto synthesized magnetic-nanosorbents was facile more than that DYG. The adsorption isotherm data showed that the adsorption processes of DYG and RS onto Fe3O4 or C@MFe2O4 nanosorbents are more suitable for the Langmuir model than Freundlich model. The maximum adsorption capacity (qmax) of DYG dye onto Fe3O4, C@Fe3O4 and C@CoFe2O4 adsorbents was 14.641, 36.232 and 7.85mg g1, respectively; meanwhile, these values were 41.152, 61.728 and 39.683mg g1 for RS dye. These obtained data indicate that the developed Fe3O4, C@Fe3O4 and C@CoFe2O4 nanoparticles can be used as recoverable and recyclable adsorbents for not only organic pigments adsorption but also for heavy metal ion removal or protein extraction as well.