http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Hoang Van Luong,Nguyen Van Long,Vu Binh Duong,Nguyen Linh Toan,Nguyen Van Minh,Le Bach Quang,Nam Hyuck Kim,Sang Yo Byun 한국생물공학회 2009 KSBB Journal Vol.24 No.2
This study was initiated to investigate the impacts of media types and other components on the callogenensis and cell mass production of Panax vietnamensis in the first step of the cell biomass procedure. Four media were checked: Murashige-Skoog (MS), White, Gamborg and Nitch-All. All the four media were shown potential media for Panax vietnamensis callogenensis and cell mass production, in which the MS medium showed the best results: the successful callogenensis ratio and cell mass formation were 30% and 62,93 ± 3,63 mg (DW) respectively, the Nitch medium showed the lowest results: the successful callogenensis ratio and cell mass formation were 15% and 27,10 ± 2,24 mg (DW) respectively. The results showed that the MS medium is the most suitable medium for Panax vietnamensis callogenensis and cell mass production.
Luong, Hoang Van,Long, Nguyen Van,Duong, Vu Binh,Toan, Nguyen Linh,Minh, Nguyen Van,Quang, Le Bach,Kim, Nam-Hyuck,Byun, Sang-Yo The Korean Society for Biotechnology and Bioengine 2009 KSBB Journal Vol.7 No.4
This study was initiated to investigate the impacts of media types and other components on the callogenensis and cell mass production of Panax vietnamensis in the first step of the cell biomass procedure. Four media were checked: Murashige-Skoog (MS), White, Gamborg and Nitch-AII. All the four media were shown potential media for Panax vietnamensis callogenensis and cell mass production, in which the MS medium showed the best results: the successful callogenensis ratio and cell mass formation were 30% and 62,93 ${\pm}$ 3,63 mg (DW) respectively, the Nitch medium showed the lowest results: the successful callogenensis ratio and cell mass formation were 15% and 27,10 ${\pm}$ 2,24 mg (DW) respectively. The results showed that the MS medium is the most suitable medium for Panax vietnamensis callogenensis and cell mass production.
Factors Influencing Corporate Debt Maturity: An Empirical Study of Listed Companies in Vietnam
Van Toan NGO,Thi Lanh LE 한국유통과학회 2021 The Journal of Asian Finance, Economics and Busine Vol.8 No.5
The maturity structure of corporate debt is one of the significant financing choices that a firm must make simultaneously while deciding how to finance its operational and investment decisions. Even though the capital structure is one of the scrutinized topics of interest in the corporate finance literature, scarce studies have investigated corporate debt maturity, even less so in the context of emerging markets. The choice of a suitable debt maturity structure is exceptionally relevant for firms. It can enable them to avoid mismatch by aligning assets in line with liabilities, addressing agency-related problems, sidestep the ill effects of cost of capital, and signaling the firms’ earning quality and value. The study investigates the firm-specific and macroeconomic determinants significant for the debt maturity structure of Vietnamese corporate firms. A sample of 722 non-financial firms listed on the Ho Chi Minh and Hanoi Stock Exchange in Vietnam from 2007 to 2018 was taken to test the hypothesis. The study’s methods fixed effects panel data analysis provides empirical evidence that firm size, firms’ quality, liquidity, leverage, asset maturity, tax impact, and macro variables are significantly related to the debt maturity structure.
Hoang, Van Thanh,Luu, Duc Binh,Toan Do, Le Hung,Tran, Ngoc Hai,Nguyen, Pham The Nhan,Tran, Minh Sang,Tran, Minh Thong Materials Research Society of Korea 2020 한국재료학회지 Vol.30 No.12
A combination of Polycarbonate (PC) material and Polymethylmethacrylate (PMMA), fabricated using an injection molding machine, has been investigated to determine its advantages, as studied in Ref. 1). This paper aims to investigate the optimization of PMMA/PC blend for both tensile yield strength and impact strength. Furthermore, interaction effects of process conditions on mechanical properties including tensile yield strength and impact strength of PMMA/PC blend by injection molding process are interpreted in this study. Tensile and impact specimens are designed following ASTM, type V, and are fabricated by injection molding process. The processing conditions such as melt temperature, mold temperature, packing pressure, and cooling time are applied; each factor has three levels. As a result, in comparison with optimization of separated responses, mechanical properties of PMMA/PC are found to decrease when optimizing both tensile and impact strengths simultaneously. The melt temperature is found to be the most significant interaction parameter with the mold temperature and packing pressure. In addition, there is more interaction between the mold temperature and cooling time. This investigation provides a useful understanding of the control of injection molding processing of polymer blends in optical application.
An Approach for Scheduling Problem in Port Container Terminals : Moving and Stacking
HA Phuoc Lan,LE Ba Toan,HUYNH Tuong Nguyen,NGUYEN An Khuong,NGUYEN Van Minh Man 한국인터넷방송통신학회 2015 International Journal of Internet, Broadcasting an Vol.7 No.1
In this study, we consider the transportation problem in port container terminals. It aims to determine positions in yards to place the containers at the adequate times. The containers on ship must be unloaded one by one from top to bottom, and placed in the main yard in order to reduce additional cost required for unnecessary unloading when getting out by customer with given timetable. The cost for transportation at container terminals could be reduced by a new approach in scheduling: move the containers from ship and stack them onto main yard that minimizes cost of yard crane operation when unloading for customer.
( Minh Hai Pham ),( Quan Anh Tuan Le ),( Hoang Bac Nguyen ),( Quang Hung Vu ),( Thai Ngoc Huy Tran ),( Hang Dang Khoa N Guyen ),( Thi Ngoc Sang Duong ),( Van Toan Tran ) 대한간학회 2020 춘·추계 학술대회 (KASL) Vol.2020 No.1
Aims: Laparoscopic pancreaticoduodenectomy (LPD) is considered as a safe and effective procedure in well - selected patients and appropriate surgical technique. Our aim is to evaluate suitability of using protocol for LPD in treatment of periampullary cancer at a single team. Methods: case series Results: Indication for LPD included 37 cases with resectable tumors which were classified basing on NCCN. All witness evaluation risk of complications with PREPARE score, ASA and evaluation risk of postoperative pancreatic fistula (POPF) with FRS classification. There were 2 open conversions because of vein resections, accounting for 5.4%. Standard lymphadenectomy was performed in all of 37 cases. In term of PREPARE score, major complications (Clavien - Dindo >= III) were 17.8%, 0% and 0% (5/28, 0/5 and 0/2 cases) in low risk, intermediate risk and high risk group, respectively. All of cases had ASA I or II. POPF happened 11.1% (1/9), 4.1% (1/24) and 50% (1/2) in low risk, intermediate risk and high risk group, respectively. Frozen section was needed for R0 margin. Retrieved lymph nodes was 8 - 18 with 12 lymph nodes in average. Conclusions: Indication for LPD with resectable tumors is acceptable. ASA I or II is a safe measure to select patient for LPD. FRS classification shows appropriation to evaluate risk of POPF.
Luong Thi Tham,Nguyen Thi Hong Tham,Nguyen Tien Dat,Le Van Toan,Pham Thi Hong Trang,Ho Thanh-Tam,Nguyen Ngoc-Loi 한국미생물·생명공학회 2024 Journal of microbiology and biotechnology Vol.34 No.1
The widespread application of triazole fungicides (TFs) in agricultural practices can result in the considerable accumulation of active compound residues in the soil and a subsequent negative impact on the soil microbiota and crop health. In this study, we isolated three TF-degrading bacterial strains from contaminated agricultural soils and identified them as Klebsiella sp., Pseudomonas sp., and Citrobacter sp. based on analysis of morphological characteristics and 16S rRNA gene sequences. The strains used three common TFs, namely hexaconazole, difenoconazole, and propiconazole, as their only sources of carbon and energy for growth in a liquid mineral salt medium, with high concentrations (~ 500 mg/l) of each TF. In addition to the ability to degrade fungicides, the isolates also exhibited plant growth-promoting characteristics, such as nitrogen fixation, indole acetic acid production, phosphate dissolution, and cellulose degradation. The synergistic combination of three bacterial isolates significantly improved plant growth and development with an increased survival rate (57%), and achieved TF degradation ranging from 85.83 to 96.59% at a concentration of approximately 50 mg/kg of each TF within 45 days in the soil-plant system. Based on these findings, the three strains and their microbial consortium show promise for application in biofertilizers, to improve soil health and facilitate optimal plant growth.