http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Design and Implementation of the 6-port Direct Conversion Receiver
JoonGyu Ryu,Sung-Min Han,Young-Wan Kim,Ho-kyeom Kim 대한전자공학회 2007 ITC-CSCC :International Technical Conference on Ci Vol.2007 No.7
The 6-port DCR(Direct Conversion Receiver) has been proposed. In this paper the 6-port DCR has been designed, implemented and measured for satellite terminal application. This paper presents the basic principle of 6-port DCR and designed using ADS envelop simulation. The QPSK modulation is adopted and the output is measured by oscilloscope, constellation. This paper shows the possibility of the 6-port DCR(Direct Conversion Receiver).
Dual ISM-band gap-filler microstrip antenna with two Y-shaped slots for satellite internet service
Kim, Byoungchul,Ryu, Joongyu,Choo, Hosung,Lee, Hojin,Park, Ikmo Wiley Subscription Services, Inc., A Wiley Company 2010 MICROWAVE AND OPTICAL TECHNOLOGY LETTERS Vol.52 No.8
<P>This article describes a dual-band gap-filler microstrip antenna with nearly equal gain and similar radiation patterns in the 2.4-GHz and 5.8- GHz ISM satellite Internet service bands.The proposed antenna has two Y-shaped slots on the microstrip patch and is fabricated on an RO4003 substrate with a dielectric constant of 3.38 and a thickness of 0.508 mm. The dimensions of the antenna are 50 mm × 47.5 mm × 6.5 mm, and it is fed by a coaxial cable. The measured bandwidths of the antenna are 2.376–2.492 GHz and 5.425–6.055 GHz for a voltage standing wave ratio of less than 2. At 2.42 GHz, the antenna has a broadside radiation pattern with a half-power beamwidth (HPBW) of 70° in the x-z plane and 80° in the y-z plane. At 5.75 GHz, it has a HPBW of 65° in the x-z plane and 75° in the y-z plane. The measured gain is 8.37 dB in the 2.4-GHz ISM band and 8.38 dB in the 5.8 GHz ISM band. © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52: 1825–1827, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.25325</P>
KeunPyo Hong,JoonGyu Ryu,HoKyom Kim 대한전자공학회 2007 ITC-CSCC :International Technical Conference on Ci Vol.2007 No.7
This paper introduces the modified blind signal processing to regenerate I/Q signals based on Constant Modulus Algorithm for direct conversion receiver and the performance using MATLAB simulations. Also This paper represents the conventional three blind signal processing techniques, Singular Value Decomposition(SVD), Independent Component Analysis(ICA), and Constant Modulus Algorithm(CMA). CMA technique also has phase error, but regenerates the reliable I/Q data. Therefore we suggest modified regeneration algorithm to compensate phase error using phase information of the received signal. It is shown that the constellation performance of suggested regeneration algorithm is similar to conventional QPSK, 8PSK using computer simulation and the regenerated constellation is similar to the transmitted signal constellation without phase distortion.
Soft Surface를 이용한 신호 중계 장치용 이중 대역 마이크로스트립 안테나
김병철(Byoungchul Kim),류준규(Joongyu Ryu),추호성(Hosung Choo),장대익(Daeik Jang),박익모(Ikmo Park) 한국전자파학회 2009 한국전자파학회논문지 Vol.20 No.11
본 논문에서는 soft surface를 이용하여 IEEE 802.11a/b 대역에서 10 ㏈i 이상의 이득과 유사한 모양의 복사패턴과 이득을 가지며, 동작하는 신호 중계 장치용 안테나를 제안한다. 제안한 안테나의 크기는 50×56.5×5.5 ㎣이고, soft surface를 포함한 접지면의 크기는 175.0×154.4 ㎟이다. 안테나는 동축 케이블을 이용하여 급전하였으며, 두께가 0.508 ㎜이고 비유전율이 3.38인 RO4003 기판 위에 설계하였다. 전산 모의 실험 결과, VSWR<2 기준으로 2.388∼2.493 ㎓와 5.561∼6.051 ㎓의 대역폭을 가지며, 각 대역의 중심 주파수에서의 이득은 10.63 ㏈i와 10.33 ㏈i이다. In this paper, a dual band microstrip antenna with soft surface for gapfiller applications is proposed. The proposed antenna with similar radiation pattern and gain is fabricated on RO4003 substrate with a dielectric constant of 3.38 and a thickness of 0.508 ㎜, and operates in IEEE 802.11a/b bands. The size of the antenna is 50×56.5×5.5 ㎣ and the ground plane size including soft surface structure is 175.0×154.4 ㎟. The antenna is fed by coaxial cable. The simulated bandwidths of the antenna are 2.388~2.493 ㎓ and 5.561~6.051 ㎓ for VSWR<2. The gains are 10.63 ㏈i and 10.33 ㏈i, respectively, for the lower and upper bands.
재난현장 적용을 위한 CSS 기반 위성 IoT 신호 검출확률 개선효과 분석
이상민(Sangmin Lee),임경래(Gyeongrae Im),유준규(Joongyu Ryu),장대익(Daeig Chang) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.2
본 논문에서는 재난현장에서 필요한 정보 수집에 활용될 수 있는 후보기술 중 하나인 LoRa (Long Range) 기술을 위성환경을 고려한 IoT 에 적용하기 위해 신호검출 확률을 분석한다. 여기서 P2P 통신환경을 가정하였으며, 송신기에서는 LoRa 전송방식을 통하여 데이터 패킷을 생성하고 수신기에서는 LoRa 프리앰블을 탐색하여 패킷을 검출한다. 이 때 프리앰블 길이에 따른 패킷 검출 성능 변화를 분석하였고 컴퓨터 시뮬레이션 결과를 통해 본 논문이 주장하는 프리앰블 심볼 수와 검출확률 간의 상관관계를 입증하였다.
피막형 팽창성 금속 스텐트를 삽입하여 호전된 담도 스텐트 제거 후 발생한 대량의 혈액 담즙증 2예
우지헌 ( Ji Hun Woo ),김준열 ( Junyeol Kim ),최진호 ( Jin Ho Choi ),강준규 ( Joongyu Kang ),백우현 ( Woo Hyun Paik ),류지곤 ( Ji Kon Ryu ),김용태 ( Yong-tae Kim ),이상협 ( Sang Hyub Lee ) 대한췌장담도학회 2023 대한췌담도학회지 Vol.28 No.3
담도 스텐트가 인접한 담도 주위 혈관에 손상을 주어 혈액담즙증을 유발하거나 스텐트 제거 시 손상으로 발생할 수 있다고 드물게 보고된다. 스텐트 제거 시 활력징후가 불안정해질 정도의 혈액 담즙증이 생기는 경우, 혈관조영술을 시행하기 전 구조 요법으로 피막형 팽창성 금속 스텐트의 압박효과를 통한 지혈을 기대하고 삽입할 수 있다. 본 두 증례는 간문부 담관암 환자에서 간문부 폐색에 대해 삽입한 담도 스텐트 그리고 간세포암종 환자에서 간동맥 화학색전술 이후 동반된 간농양의 내배액 목적으로 삽입한 담도 스텐트를 각각 교체 목적으로 제거 후 급격히 악화된 대량의 혈액 담즙증을 피막형 팽창성 금속 스텐트를 삽입하여 성공적으로 치료된 사례이다. 한편, 해당 상황에선 정확한 출혈 위치를 알기 어려워 예상되는 출혈 위치를 포함할 수 있을 만큼 높은 위치에 스텐트를 삽입해야 하며 적절한 위치에 삽입되었더라도 지혈이 되지 않을 수 있기에 일시적인 방안이며 스텐트 자체의 한계점들도 있다. 따라서, 기존의 스텐트 제거 시 혈액 담즙증이 발생할 수 있음을 인지하고, 그중 출혈의 위험성이 높은 환자에서는 제거 전 영상 검사를 고려해야 하며 출혈이 발생한 뒤 스텐트를 통해 성공적으로 지혈을 시행했더라도 출혈 및 가성동맥류와 같은 혈관 기형의 확인을 위한 영상 검사를 고려해야한다. Biliary stent removal can cause hemobilia due to injury to the adjacent vessel, but it is rarely reported. If significant hemobilia occurs during stent removal, same-session covered self-expandable metal stent (CSEMS) insertion may be useful as a rescue or bridge therapy before angiography. Here, we report two cases of life-threatening hemobilia following stent removal successfully treated by CSEMS. The first case was a Klatskin tumor bismuth type IV patient who required biliary stenting for resolving malignant biliary obstruction. The second case was a hepatocellular carcinoma patient who had undergone multiple transarterial chemoembolization and required biliary stents for liver abscess. In this situation, inserting a CSEMS at a higher level than the expected bleeding site and recognizing stenting as a temporary therapy with its limitations are important. Also, it is crucial to consider pre-procedural imaging in high-risk patients, and perform post-procedural imaging to evaluate for ongoing bleeding or vascular abnormalities. Korean J Pancreas Biliary Tract 2023;28(3):81-88