http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Numerical investigation on residual stress in photovoltaic laminates after lamination
Q. Z. Zhang,B. F. Shu,M. B. Chen,Q. B. Liang,C. Fan,Z. Q. Feng,P. J. Verlinden 대한기계학회 2015 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.29 No.2
A series of simulations were carried out to investigate the residual stress induced in the photovoltaic laminate during the cooling processafter lamination with a global model and several submodels. The simulations focus separately on the effects of the cooling rate, thecell layout and anisotropy on the residual stress and deformation of the photovoltaic laminate in a comparative manner with the finiteelement method. The results have shown that significant stress concentration and twist occurs in the interconnection region in the cell. Inaddition, different cooling rates, cell layouts and anisotropy only influence the largest stress rather than the stress distribution and deformation. Therefore, the results of a uniform stationary isotropic model with fewer cells can provide enough insight into the stress distributionin real photovoltaic laminates and the modified largest first principal stress can be used for design and verification.
R&D Status of High-current Accelerators at IFP
J. J. Deng,J. S. Shi,W. P. Xie,L. W. Zhang,K. Z. Zhang,S. P. Feng,J. Li,M. Wang,Y. He,L. S. Xia,Z. Y. Dai,H. T. Li,L. Wen,S. F. Chen,X. Li,Q. G. Lai,M. H. Xia,Y. C. Guan,S. Y. Song,L. Chen 한국물리학회 2011 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.59 No.61
High-current accelerators have many important applications in Z-pinches, high-power microwaves, and free electron lasers, imploding liners and radiography and so on. Research activities on Zpinches, imploding liners, radiography at the Institute of Fluid Physics (IFP) are introduced. Several main high-current accelerators developed and being developed at IFP are described, such as the Linear Induction Accelerator X-Ray Facility Upgrade (LIAXFU, 12 MeV, 2.5 kA, 90 ns), the Dragon-I linear induction accelerator (20 MeV, 2.5 kA, 60 ns), and the Primary Test Stand for Z-pinch (PTS, 10 MA, 120 ns). The design of Dragon-II linear induction accelerator (20 MeV, 2.5 kA, 3 × 60 ns) to be built will be presented briefly.
J. Y. LIAO,H. LI,J. J. LIANG,Y. F. FENG,X. B. ZHANG,Y. Q. YIN,H. X. TAO 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2013 NANO Vol.8 No.1
Magnetic Ni micro/nanostructures with controlled morphology have drawn intensive attention due to their interesting physicochemical properties and potential applications in micro/nanodevices. In this study, one-dimensional Ni nanochains with an average diameter of about 140 nm were prepared by a magnetic-field-assisted chemical reduction of Ni2+ with hydrazine hydrate free of any template or surfactant. It was found that the morphology and the size of the Ni chains could be adjusted by changing the complexant used in the synthesis. The usage of surfactant in the synthesis would retard the firm connection of Ni nanoparticles and thus resulted in the formation of Ni nanochains consisting of loosely aggregated Ni nanoparticles. The magnetic measurement at room temperature indicated that the coercivity of the Ni sample reached 133.2 Oe, which was much higher than that of bulk Ni metal.
Wang J.J.,Deng Q.J.,He Y.Y.,Feng Y.N.,Kang M.P.,Duan X.L.,Yang Y.L. 한국물리학회 2022 Current Applied Physics Vol.39 No.-
CCTO (Calcium copper titanate) powder as inorganic filler was synthesized by the Sol-gel method firstly. CCTO/ PVDF (Polyvinylidene fluoride) composite was fabricated by solution mixing based on high temperature resistance of PVDF and insulated property of CCTO. The composite of CCTO/PVDF were characterized by X-ray diffraction, Fourier Transform infrared spectroscopy, Scanning Electron Microscope and impedance analysis. The results showed that the addition of CCTO and increasing in its content did not affect the phase- and microstructure of the composites,but the increase of CCTO content can induce the generation of C–F new bonds. PVDF/CCTO composites were enhanced in performance of thermal and frequency-depended stability with increasing in the fraction of CCTO. The dielectric constant of CCTO/PVDF composite materials with 50% CCTO achieved to a maximum value of 50 almost, which is 5 times higher the pure PVDF. The conductivity felled into 10-8 to 10-1 S m-1 during the frequency of 102–108 Hz. The composite material would be expected to be applied in the field of integrated circuit.
Improvement of lower hybrid current drive systems for high-power and long-pulse operation on EAST
Wang M.,Liu L.,Zhao L.M.,Li M.H.,Ma W.D.,Hu H.C.,Wu Z.G.,Feng J.Q.,Yang Y.,Zhu L.,Chen M.,Zhou T.A.,Jia H.,Zhang J.,Cao L.,Zhang L.,Liang R.R.,Ding B.J.,Zhang X.J.,Shan J.F.,Liu F.K.,Ekedahl A.,Gonich 한국원자력학회 2022 Nuclear Engineering and Technology Vol.54 No.11
Aiming at high-power and long-pulse operation up to 1000 s, some improvements have been made for both 2.45 GHz and 4.6 GHz lower hybrid (LH) systems during the recent 5 years. At first, the guard limiters of the LH antennas with graphite tiles were upgraded to tungsten, the most promising material for plasma facing components in nuclear fusion devices. These new guard limiters can operate at a peak power density of 12.9 MW/m2 . Strong hot spots were usually observed on the old graphite limiters when 4.6 GHz system operated with power >2.0 MW [B. N. Wan et al., Nucl. Fusion 57 (2017) 102019], leading to a reduction of the maximum power capability. With the new limiters, 4.6 GHz LH system, the main current drive (CD) and electron heating tool for EAST, can be operated with power >2.5 MW routinely. Long-pulse operation up to 100 s with 4.6 GHz LH power of 2.4 MW was achieved in 2021 and the maximal temperature on the guard limiters measured by an infrared (IR) camera was about 540 C, much below the permissible value of tungsten material (~1200 C). A discharge with a duration of 1056 s was achieved and the 4.6 GHz LH energy injected into the plasma was up to 1.05 GJ. Secondly, the fully-activemultijunction (FAM) launcher of 2.45 GHz system was upgraded to a passive-active-multijunction (PAM), for which the density of optimum coupling was relatively low (below the cut-off value). Good coupling with reflection coefficient ~3% has been achieved with plasma-antenna distance up to 11 cm for the new PAM. Finally, in order to eliminate the effect of ion cyclotron range of frequencies (ICRF) wave on 4.6 GHz LH wave coupling, the location of the ICRF launcher was changed to a port that is located 157.5 toroidally from the 4.6 GHz LH system and is not magnetically connected
Development of the 3.7 GHz LHCD System on HL-2A
B. Lu,M. Huang,H. Zeng,X. Y. Bai,X. H. Mao,Z. H. Lu,J. Liang,Z. H. Kang,M. W. Wang,K. Feng,H. Wang,C. Wang,J. Q. Wang,S. Wei,T. Yao,Y. N. Bu,J. Feng,G. Y. Cheng,S. D. Song,D. H. Xia,J. Rao 한국물리학회 2014 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.65 No.8
A 2 MW-3.7 GHz lower hybrid current drive (LHCD) system is under development for physicsexperiments on the HL-2A device. The RF Power is generated by four TH2103A klystron amplifiersand propagates in the TE10 mode through WR284 waveguides. The transmission lines with a lengthof 20 m to 30 m are pressurized with 2 bars of nitrogen to decrease the possibility of arcing. Thelauncher, based on the passive-active multi-junction (PAM) concept, has been developed and iscurrently being realized. It was designed for a power spectrum peaked at Nk = 2.75 with goodcoupling properties over a wide range of plasma parameters. The four klystrons are fed by ahigh-voltage power supply (HVPS) based on the pulse step modulation (PSM) concept with a fastswitch-off time of less than ten μs. This system is expected to be in operation within 1 years and willexplore many international thermonuclear experimental reactor (ITER) related LH experiments inthe following years.
Feng, Y.,Yang, X.J.,Wang, Y.B.,Li, W.L.,Liu, Y.,Yin, R.Q.,Yao, J.H. Asian Australasian Association of Animal Productio 2012 Animal Bioscience Vol.25 No.5
Immune stress is the loss of immune homeostasis caused by external forces. The purpose of this experiment was to investigate the effects of immune stress on the growth performance, small intestinal enzymes and peristalsis rate, and mRNA expression of nutrient transporters in broiler chickens. Four hundred and thirty-two 1-d-old broilers (Cobb500) were randomly assigned to four groups for treatment; each group included nine cages with 12 birds per cage. Group 1 = no vaccine (NV); Group 2 = conventional vaccine (CV); group 3 = lipopolysaccharide (LPS)+conventional vaccine (LPS); group 4 = cyclophosphamide (CYP)+conventional vaccine (CYP). The results demonstrated that immune stress by LPS and CYP reduced body weight gain (BWG), feed intake (FI), small intestine peristalsis rate and sIgA content in small intestinal digesta (p<0.05). However, the feed conversion ratio (FCR) remained unchanged during the feeding period. LPS and CYP increased intestinal enzyme activity, relative expression of SGLT-1, CaBP-D28k and L-FABP mRNAs (p<0.05). LPS and CYP injection had a negative effect on the growth performance of healthy broiler chickens. The present study demonstrated that NV and CV could improve growth performance while enzyme activity in small intestine and relative expression of nutrient transporter mRNA of NV and CV were decreased in the conditions of a controlled rational feeding environment. It is generally recommended that broilers only need to be vaccinated for the diseases to which they might be exposed.
Influence of Silver Ions in HA Film on Morphology of Macrophages
Feng, Q.L.,Kim, T.N.,Kim, J.W. The Korean Vacuum Society 1998 Applied Science and Convergence Technology Vol.7 No.1
Ion beam assisted deposition (IBAD) was successfully used to produce a dense and ultra-adherent Hydroxyapatite (HA) film on titanium alloy and alumina. Recently it is also proved that the HA coatings on alumina substrate treated with 20 ppm $AgNO_3$ had the structure of $(Ag, Ca)_10(PO_4)6(OH)_2$, which exhibited excellent antimicrobial effects. The present paper aims to morphlogically characterize the adhesion of macrophages on newly developed Ag-HA coated alumina and Ti6A14V substrates and to evaluate the biocompatibility of the coatings in vitro. It can be found that the cell number on alumina of the concentration of $AgNO_3$ in the treatment, the cell number on Ag-HA coatings decreased. Up to 20 ppm $AgNO_3$ by Ag-treatment, the morphological development of the cells on Ag-HA coating was similar to that of the cells on HA coating, suggesting the biotolerance of the Ag-HA coatings.