http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Lee, Jinhwan,Lee, Phillip,Lee, Ha Beom,Hong, Sukjoon,Lee, Inhwa,Yeo, Junyeob,Lee, Seung Seob,Kim, Taek‐,Soo,Lee, Dongjin,Ko, Seung Hwan WILEY‐VCH Verlag 2013 Advanced functional materials Vol.23 No.34
<P>D. Lee, S. H. Ko, and co‐workers develop an alternative to rigid ITO transparent conductors. On page 4171, conducting polymer‐assisted nanosoldering of Ag nanowires allows them to develop nanowire percolation networks, which form highly flexible and stretchable transparent conductors. A large area transparent conductor and a flexible touch panel on a non‐flat surface are fabricated, demonstrating the possibility of cost‐effective mass production as well as the applicability of these networks to unconventional, non‐flat surfaces. </P>
Lee, Jinhwan,Lee, Phillip,Lee, Ha Beom,Hong, Sukjoon,Lee, Inhwa,Yeo, Junyeob,Lee, Seung Seob,Kim, Taek‐,Soo,Lee, Dongjin,Ko, Seung Hwan WILEY‐VCH Verlag 2013 Advanced Functional Materials Vol.23 No.34
<P><B>Abstract</B></P><P>As an alternative to the brittle and expensive indium tin oxide (ITO) transparent conductor, a very simple, room‐temperature nanosoldering method of Ag nanowire percolation network is developed with conducting polymer to demonstrate highly flexible and even stretchable transparent conductors. The drying conducting polymer on Ag nanowire percolation network is used as a nanosoldering material inducing strong capillary‐force‐assisted stiction of the nanowires to other nanowires or to the substrate to enhance the electrical conductivity, mechanical stability, and adhesion to the substrate of the nanowire percolation network without the conventional high‐temperature annealing step. Highly bendable Ag nanowire/conducting polymer hybrid films with low sheet resistance and high transmittance are demonstrated on a plastic substrate. The fabricated flexible transparent electrode maintains its conductivity over 20 000 cyclic bends and 5 to 10% stretching. Finally, a large area (A4‐size) transparent conductor and a flexible touch panel on a non‐flat surface are fabricated to demonstrate the possibility of cost‐effective mass production as well as the applicability to the unconventional arbitrary soft surfaces. These results suggest that this is an important step toward producing intelligent and multifunctional soft electric devices as friendly human/electronics interface, and it may ultimately contribute to the applications in wearable computers.</P>
Lee, Jin Hwan,Lee, Phillip,Lee, Dongjin,Lee, Seung Seob,Ko, Seung Hwan American Chemical Society 2012 Crystal Growth & Design Vol.12 No.11
<P>In this research, we developed a novel successive multistep growth method to synthesize very long silver nanowires (AgNWs) over several hundred micrometers (maximum length of 400–500 μm) and performed a systematic parameter study to optimize the dimension of nanowires synthesized at a large scale. It was demonstrated that AgNWs continued to grow through successive multistep growth as long as Ag ion rich conditions were maintained continuously. We successfully attained an extremely high aspect ratio of 1000–3000 with length of over 300 μm and diameter of less than 150 nm. This value demonstrated an order of magnitude length enhancement from previous AgNW synthesis research. Furthermore, we demonstrated that the very long AgNW mesh can be used for a transparent conductor as an alternative to metal oxide conductors. The production of very long metal nanowires at a large scale has significant impact on their potential application in flexible transparent conductors.</P><P>A synthesis method for very long Ag nanowires has been developed through successive multistep growth. Comprehensive parametric study to increase nanowire length and characterization and application of the very long Ag nanowire have been conducted.</P><P><B>Graphic Abstract</B> <IMG SRC='http://pubs.acs.org/appl/literatum/publisher/achs/journals/content/cgdefu/2012/cgdefu.2012.12.issue-11/cg301119d/production/images/medium/cg-2012-01119d_0010.gif'></P><P><A href='http://pubs.acs.org/doi/suppl/10.1021/cg301119d'>ACS Electronic Supporting Info</A></P>
Lee, Jinhwan,Lee, Phillip,Lee, Hyungman,Lee, Dongjin,Lee, Seung Seob,Ko, Seung Hwan RSC Pub 2012 Nanoscale Vol.4 No.20
<P>The future electronics will be soft, flexible and even stretchable to be more human friendly in the form of wearable computers. However, conventional electronic materials are usually brittle. Recently, carbon based materials are intensively investigated as a good candidate for flexible electronics but with limited mechanical and electrical performances. Metal is still the best material for electronics with great electrical properties but with poor transparency and mechanical performance. Here we present a simple approach to develop a synthesis method for very long metallic nanowires and apply them as new types of high performance flexible and transparent metal conductors as an alternative to carbon nanotubes, graphene and short nanowire based flexible transparent conductors and indium tin oxide based brittle transparent conductors. We found that very long metallic nanowire network conductors combined with a low temperature laser nano-welding process enabled superior transparent flexible conductors with high transmittance and high electrical conductivity. Further, we demonstrated highly flexible metal conductor LED circuits and transparent touch panels. The highly flexible and transparent metal conductors can be mounted on any non-planar surfaces and applied for various opto-electronics and ultimately for future wearable electronics.</P>
Lee, Phillip,Lee, Jinhwan,Lee, Hyungman,Yeo, Junyeob,Hong, Sukjoon,Nam, Koo Hyun,Lee, Dongjin,Lee, Seung Seob,Ko, Seung Hwan WILEY‐VCH Verlag 2012 ADVANCED MATERIALS Vol.24 No.25
<P><B>A highly stretchable metal electrode</B> is developed via the solution‐processing of very long (>100 μm) metallic nanowires and subsequent percolation network formation via low‐temperature nanowelding. The stretchable metal electrode from very long metal nanowires demonstrated high electrical conductivity (∼9 ohm sq<SUP>−1</SUP>) and mechanical compliance (strain > 460%) at the same time. This method is expected to overcome the performance limitation of the current stretchable electronics such as graphene, carbon nanotubes, and buckled nanoribbons.</P>
Screening of rice drought tolerant germplasms and drought tolerant QTL mapping
Dongjin Shin,Tae-Heon Kim,Sang-Ik Han,Ji-Yoon Lee,Youngbo Son,Sung Hwan Oh,Yeon-Jae Hur,Saisbeul Lee,Jun-Hyun Cho,Jong-Hee Lee,You-Chun Song,Min-Hee Nam,Dong-Soo Park,Yeong-Up Kwon 한국육종학회 2015 한국육종학회 심포지엄 Vol.2015 No.07
In here, we screened drought tolerant varieties with modified leaf water loss rate assay and visual drought tolerant phenotype in the greenhouse conditions with more than 800 varieties. Among these varieties, Samgang, Gumei4 and Apo showed the lowest of leaf water loss rate and strong drought tolerant phenotype. To identify drought QTLs with Samgang variety, we developed the doubled-haploid (DH) population consist of 101 lines derived from a cross the drought tolerant cultivar Samgang and the drought sensitive cultivar Nagdong. To score the drought phenotype degrees of this population, we withheld water for 6 weeks and treated the watering for 7 days. After watering, visual phenotype was observed 1 to 9 degree according to the standard evaluation system for rice, IRRI. Drought sensitive parent Nagdong was almost died and was scored as 9 degree, while tolerant parent Samgang showed slightly leaf tip drying phenotype and was scored as 3 degree in our experimental conditions. Three main QTLs were detected on chromosome 2, 6, and 11 with this visual phenotype. We also measured relative water contend of these population under drought stress conditions, and got one main QTL on chromosome 11. The QTL loci on chromosome 11 with flanking markers RM26755-RM287 has a function for visual phenotype and relative water content under drought conditions.
음식물류폐기물 처리시설의 세부검사방법 마련을 위한 현장조사
이풀잎 ( Puleip Lee ),권은혜 ( Eunhye Kwon ),이승재 ( Seungjae Lee ),손준익 ( Junik Son ),이동진 ( Dongjin Lee ),이원석 ( Wonseok Lee ),유명수 ( Myungsoo Yoo ) 한국폐기물자원순환학회(구 한국폐기물학회) 2021 한국폐기물자원순환학회 춘계학술발표논문집 Vol.2021 No.-
폐기물처리시설의 운영 및 관리의 선진화를 위한 폐기물관리법이 개정됨에 따라 폐기물처리시설 검사기관이 준수해야 할 사항과 설치·정기검사에서 수행해야 할 사항 등 구체적인 세부검사방법을 마련이 시급한 실정이다. 이에 본 연구에서는 음식물류폐기물 처리시설의 현장조사를 통해 설치 및 정기검사의 객관성과 신뢰성 제고를 위한 세부검사방법을 제시하고자 하였다. 음식물류폐기물 처리시설은 총 9개 시설로 분류할 수 있으며, 각 처리시설마다 세부검사방법이 마련되어 있으므로 각 시설별 특성에 따른 현황 및 처리실태 파악을 위해 사료화, 퇴비화, 혐기성분해, 파쇄·탈수, 동애등에분변토 생산시설 등을 방문하여 관리상 문제점 및 검사방법의 한계성을 조사하였다(그림 1). 조사결과 검사방법이 육안확인 또는 목측확인 등 정확한 검사행위가 없어 검사 결과의 신뢰성이 저하되는 문제점과, 소규모 또는 처리공법의 특성상 해당되지 않는 검사항목이 무분별하게 제시되어 있음을 파악하였다. 이를 통해 설계도서, 성적서 확인, 현장실측(온도측정, 시료채취를 통한 품질검사 등) 등 정확한 검사행위를 수행할 수 있도록 폐기물처리시설 별 설치·정기검사방법에 대한 세부 표준검사방법을 마련함으로서 검사기관 별 일관성 있는 검사시행이 가능하고, 성적서 및 검사결과 등의 자료를 일정 기간 보관함으로서 효율적인 폐기물처리시설에 대한 관리 가능할 것으로 판단된다. 또한 음식물류폐기물 처리시설 검사기관의 검사능력 평가 및 관리에도 효율적인 절차 및 기준에 활용될 수 있을 것이라고 판단된다.
음폐수의 하수슬러지 병합 처리를 위한 물리화학적 분석 및 혐기성소화 평가
이원배 ( Wonbae Lee ),이풀잎 ( Puleip Lee ),권준화 ( Junhwa Kwon ),이동진 ( Dongjin Lee ),이원석 ( Wonseok Lee ),신선경 ( Sunkyung Shin ) 한국폐기물자원순환학회(구 한국폐기물학회) 2020 한국폐기물자원순환학회 추계학술발표논문집 Vol.2020 No.-
최근까지 음식물류폐기물 및 하수슬러지와 같은 유기성폐기물을 해양투기로 처리하였으나 런던협약 이후, 우리나라는 2012년부터 축산분뇨, 2013년부터는 음폐수의 해양배출이 금지되었고, 이에 따라 유기성폐기물을 전량 육상처리 하도록 하고 있다. 대표적인 고농도 유기성폐기물중 하나인 음식물류폐기물은 대부분 사료화 및 퇴비화 등으로 육상처리 되었으나, 아프리카돼지열병(ASF) 발생으로 인해 2019년부터 음식물류폐기물의 습식 사료화가 축소되었다. 이에 습식사료화로 처리되고 있던 음식물류폐기물이 건식사료화·퇴비화·중간가공 등으로 처리 물량이 증가함에 따라 급증하는 음폐수의 처리 방안이 필요한 실정이다. 음폐수의 처리 방법 중, 폐기물 안정화 및 발생하는 바이오가스를 에너지원으로 사용할 수 있는 혐기성 소화가 각광을 받고 있다. 하지만, 국내 음폐수의 경우, 혐기성 소화 시 낮은 pH 및 염분농도로 인해 혐기성 소화 효율이 저하될 수 있어 이를 극복하기 위한 방안으로 하수슬러지와 혼합하여 처리하는 병합 혐기성 소화 방법을 활용할 수 있다. 따라서, 본 연구에서는 음식물류폐기물의 습식사료화가 축소됨에 따른 처리시설별 변동 현황 및 처리량을 파악하였으며, 효율적인 병합 혐기성 소화를 위해 음폐수 및 하수슬러지의 물리화학적 분석을 실시하여 각 폐기물별 바이오가스 발생량 및 저해인자 영향을 평가하였다. 또한, 실증 하수처리장내 혐기소화 시설에 음폐수를 투입하여 혐기성 소화 효율을 평가하였다. ASF 발병 이후, 음식물류폐기물 처리 시설의 현장 및 유선 조사를 실시한 결과, 습식사료화 시설은 총 121 개소 감소하였다. 효율적인 병합 소화를 위한 각 폐기물의 물리화학적 분석을 실시한 결과, 바이오가스 발생량은 음폐수가 하수슬러지에 비해 약 19% 높았으나, 고농도로 존재 시 혐기성 소화에 저해를 줄 수 있는 NH<sub>4</sub><sup>+</sup>농도가 약 1.9배 높았다. 이에, 하수처리장내 음폐수 투입량을 증가시키면서 혐기성 소화를 실시한 결과, TS 및 VS 제거율은 각각 45.4, 61.1%로 음폐수 투입 전과 비교하여 비슷한 수준을 나타냈다. 따라서, 물리화학적 분석 및 실증 시설 운전을 통해 평가한 결과, 음폐수 및 하수슬러지의 병합 혐기성소화 시, 음폐수의 고농도 NH<sub>4</sub><sup>+</sup>와 같은 유해인자들로 인해 혐기성 소화 효율이 감소할 수 있지만, 적정 비율의 음폐수 투입을 통해 기존의 하수슬러지 혐기소화 시설에서 안정적인 병합 혐기성 소화를 실시할 수 있을 것으로 판단된다.