http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오늘 본 자료
Study on Crystallization Kinetics of Dynamically-Vulcanized PP/EPDM Blends
Bin Yang,Yan-Li Deng,Xia Ru,Ji-Bin Miao,Ming Cao,Jia-Sheng Qian,Li-Fen Su,Peng Chen,Jing-Wang Liu,La-Xia Wu,Tao Pang 한국고분자학회 2016 폴리머 Vol.40 No.4
Two types of β nucleating agents (β-NAs), aryl dicarboxylic acid amide (TMB-5) and diphenyl phthalate diamine (NT-C), were adopted to modify the polypropylene (PP)/ethylene propylene diene monomer (EPDM) blends, which were prepared by dynamic-vulcanization technology. Wide angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC) were used to study the crystallization kinetics of PP. Our results showed that the addition of β-NAs can considerably increase the crystallization temperature, and significantly decrease the spherulite size of β-PP (L300). The Jeziorny analysis showed there were ~82% and ~89% of relative crystallinity generated from the primary crystallization in the composites containing TMB-5 and NT-C, respectively. The crystallization half time (t0.5) showed that NT-C improved the overall crystallization rate more effectively than TMB-5. In addition, the peaks of the relative crystallization rate curves were shifted towards higher temperature by 14 and 9℃ with the addition of TMB-5 and NT-C, respectively.
The evolved kurtogram: a novel repetitive transients extraction method for bearing fault diagnosis
Bin Pang,Yuzhi Hu,Heng Zhang,Bocheng Wang,Tianshi Cheng,Zhenli Xu 대한기계학회 2022 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.36 No.12
Kurtogram, a classic repetitive transients extraction method, plays an important role in bearing fault diagnosis. However, its performance is unstable since its index used for optimal sub-band component selection is sensitive to random pulse. Moreover, its sub-band component extraction is characterized by over-decomposition and under-decomposition defects. In this paper, an evolved Kurtogram (Evkurtogram) is proposed by designing a new index called the Gaussian distribution assigned Gini index (GDAG) for optimal sub-band component identification. In addition, a multi-scale empirical Fourier decomposition (MSEFD) for signal separation is proposed. GDAG is more suitable for quantifying the fault features of the signal due to its robustness of accidental pulses. MSEFD can achieve multi-scale decomposition of the signal reasonably and adaptively. The proposed Evkurtogram is compared with some relevant state-of-art algorithms by processing simulated and experimental bearing fault signals. It is demonstrated that the proposed Evkurtogram is effective and superior when compared to other approaches.
BIN LI,Yong-jie Pang,Yan-xue Cheng,Xiao-meng Zhu 대한조선학회 2017 International Journal of Naval Architecture and Oc Vol.9 No.4
A Collaborative Optimization (CO) methodology for ring-stiffened composite material pressure hull of underwater vehicle is proposed. Structural stability and material strength are both examined. Lamination parameters of laminated plates are introduced to improve the optimization efficiency. Approximation models are established based on the Ellipsoidal Basis Function (EBF) neural network to replace the finite element analysis in layout optimizers. On the basis of a two-level optimization, the simultaneous structure material collaborative optimization for the pressure vessel is implemented. The optimal configuration of metal liner and frames and composite material is obtained with the comprehensive consideration of structure and material performances. The weight of the composite pressure hull decreases by 30.3% after optimization and the validation is carried out. Collaborative optimization based on the lamination parameters can optimize the composite pressure hull effectively, as well as provide a solution for low efficiency and non-convergence of direct optimization with design variables.
Bin Lu,Jingcheng Xu,Ming Zhang,Weihai Pang,Li Xie 한국화학공학회 2017 Korean Journal of Chemical Engineering Vol.34 No.11
Phosphorus is the crucial factor causing eutrophication in the aquatic ecology. The high phosphorus loading in water bodies may result from the direct disposal of untreated wastewater. In this study, a fluidized bed reactor (FBR) was specially developed to remove and recover phosphorus effectively and efficiently via struvite crystallization. Different physiochemical and hydraulic conditions, including hydraulic retention time (HRT), pH, and molar ratios of Mg : P, N: P and Ca :Mg, were explored to optimize the performance of this improved FBR. For the continuous operating trials, promising removal and recovery efficiencies were achieved at the phosphorus concentration of 25.0mg/L: >90% of phosphorus could be removed under the optimum condition (pH=9, HRT=12 h, Mg : P=1.25 and N : P= 7.5). Increasing the recycle flow rate and prolonging the contact time could also enhance the FBR efficiency. The crystal products obtained in FBR were analyzed in terms of composition and structure. Results indicated that almost pure struvite (>99%) was achieved at low calcium concentrations, which could be considered as a high quality fertilizer.
Li, Bin,Pang, Yong-jie,Cheng, Yan-xue,Zhu, Xiao-meng The Society of Naval Architects of Korea 2017 International Journal of Naval Architecture and Oc Vol.9 No.4
A Collaborative Optimization (CO) methodology for ring-stiffened composite material pressure hull of underwater vehicle is proposed. Structural stability and material strength are both examined. Lamination parameters of laminated plates are introduced to improve the optimization efficiency. Approximation models are established based on the Ellipsoidal Basis Function (EBF) neural network to replace the finite element analysis in layout optimizers. On the basis of a two-level optimization, the simultaneous structure material collaborative optimization for the pressure vessel is implemented. The optimal configuration of metal liner and frames and composite material is obtained with the comprehensive consideration of structure and material performances. The weight of the composite pressure hull decreases by 30.3% after optimization and the validation is carried out. Collaborative optimization based on the lamination parameters can optimize the composite pressure hull effectively, as well as provide a solution for low efficiency and non-convergence of direct optimization with design variables.
Zhi-Bin Hu,He-An Luo,Xiao-Guang Wang,Ming-Zhi Huang,Lu Huang,Huai-Lin Pang,Chun-Hui Mao,Hui Pei,Chao-Qun Huang,Jiong Sun,Ping-Le Liu,Ai-Ping Liu 대한화학회 2014 Bulletin of the Korean Chemical Society Vol.35 No.4
In attempt to lead compounds exhibiting both insecticidal and fungicidal activities, a series of O-benzyl oximeether derivatives were designed and synthesized by introducing β-methoxyacrylate pharmacophore into a scaffold. The insecticidal activity against Aphis fabae and the fungicidal activity against Erysiphe graminis were screened. The title compounds exhibited remarkable insecticidal and fungicidal activities. The most potent compound 6d was identified. Its insecticidal LC50 against A. fabae is 6.4 mg/L, which is lower than that of chlorfenapyr (19.4 mg/L) and even close to the level of imidacloprid (4.8 mg/L). Its fungicidal EC90 in preventive and curative treatment against E. graminis are 2.2 and 4.8 mg/L, respectively, which are lower than azoxystrobin (7.0 and 5.9 mg/L). These results indicate that compound 6d can be considered as a lead for further developing new O-benzyl oxime-ether typed candidates with both fungicidal and insecticidal activities.
Hu, Zhi-Bin,Luo, He-An,Wang, Xiao-Guang,Huang, Ming-Zhi,Huang, Lu,Pang, Huai-Lin,Mao, Chun-Hui,Pei, Hui,Huang, Chao-Qun,Sun, Jiong,Liu, Ping-Le,Liu, Ai-Ping Korean Chemical Society 2014 Bulletin of the Korean Chemical Society Vol.35 No.4
In attempt to lead compounds exhibiting both insecticidal and fungicidal activities, a series of O-benzyl oximeether derivatives were designed and synthesized by introducing ${\beta}$-methoxyacrylate pharmacophore into a scaffold. The insecticidal activity against Aphis fabae and the fungicidal activity against Erysiphe graminis were screened. The title compounds exhibited remarkable insecticidal and fungicidal activities. The most potent compound 6d was identified. Its insecticidal $LC_{50}$ against A. fabae is 6.4 mg/L, which is lower than that of chlorfenapyr (19.4 mg/L) and even close to the level of imidacloprid (4.8 mg/L). Its fungicidal $EC_{90}$ in preventive and curative treatment against E. graminis are 2.2 and 4.8 mg/L, respectively, which are lower than azoxystrobin (7.0 and 5.9 mg/L). These results indicate that compound 6d can be considered as a lead for further developing new O-benzyl oxime-ether typed candidates with both fungicidal and insecticidal activities.
Predictors of Midterm Outcomes after Medial Unicompartmental Knee Arthroplasty in Asians
Hamid Rahmatullah Bin Abd Razak,Sanchalika Acharyya,Shi-Ming Tan,Hee-Nee Pang,Keng-Jin Darren Tay,Shi Lu Chia,Ngai-Nung Lo,여승진 대한정형외과학회 2017 Clinics in Orthopedic Surgery Vol.9 No.4
Background: This study was designed to evaluate predictors of good outcomes following medial unicompartmental knee arthroplasty (UKA) in Asian patients. Methods: Registry data of patients who underwent primary unilateral medial UKA from 2006 to 2011 were collected. Outcomes studied were the Oxford Knee Score (OKS) and the Physical Component Score (PCS) of the Short Form 36 (SF-36) questionnaire. These outcome scores were collected prospectively, pre- and postoperatively up to 5 years. Good outcome was defined as an overall improvement in score greater than or equal to the minimal clinically important difference (MCID). The MCID for the OKS was 5 while the MCID for the PCS was 10. Regression analysis was used to identify predictors of good outcomes following medial UKA. Results: Primary medial UKA was performed in 1,075 patients. Higher (poorer) preoperative OKS (odds ratio [OR], 1.27; p < 0.001), lower (poorer) preoperative PCS (OR, 1.08; p < 0.001), lower (poorer) preoperative Knee Society Knee Score (KSKS; OR, 1.02; p < 0.001) and higher (better) preoperative SF-36 Mental Component Score (MCS; OR, 1.02; p < 0.001) were significant predictors of good outcomes. Conclusions: Patients with poorer OKS, PCS and KSKS and better SF-36 MCS preoperatively tended to achieve good outcomes by the MCID criterion at 5 years following the index surgery.
Lee, Jong-Bin,Baek, Soo-Jin,Kim, Minji,Pang, Eun-Kyoung Korean Academy of Periodontology 2020 Journal of Periodontal & Implant Science Vol.50 No.3
Purpose: The aim of this study was to investigate and identify the main causes of periodontal tissue change associated with labial gingival recession by examining the anterior region of patients who underwent orthodontic treatment. Methods: In total, 45 patients who had undergone orthodontic treatment from January 2010 to December 2015 were included. Before and after the orthodontic treatment, sectioned images from 3-dimensional digital model scanning and cone-beam computed tomography images in the same region were superimposed to measure periodontal parameters. The initial labial gingival thickness (IGT) and the initial labial alveolar bone thickness (IBT) were measured at 4 mm below the cementoenamel junction (CEJ), and the change of the labial gingival margin was defined as the change of the distance from the CEJ to the gingival margin. Additionally, the jaw, tooth position, tooth inclination, tooth rotation, and history of orthognathic surgery were investigated to determine the various factors that could have affected anterior periodontal tissue changes. Results: The mean IGT and IBT were 0.77±0.29 mm and 0.77±0.32 mm, respectively. The mean gingival recession was 0.14±0.57 mm. Tooth inclination had a significant association with gingival recession, and as tooth inclination increased labially, gingival recession increased by approximately 0.2 mm per 1°. Conclusions: In conclusion, the IGT, IBT, tooth position, tooth rotation, and history of orthognathic surgery did not affect labial gingival recession. However, tooth inclination showed a significant association with labial gingival recession of the anterior teeth after orthodontic treatment.