http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
배위섭(Bae, Wi-Sup),정태문(Chung, Tae-Moon),최성호(Choi, Sung-Ho),허은녕(Heo, Eun-Yeong),조동호(Cho, Dong-Ho) 한국신재생에너지학회 2006 한국신재생에너지학회 학술대회논문집 Vol.2006 No.06
현행 농어촌전화촉진법에 의한 10호이상 도서전화사업이 2006년 말까지 완료될 예정임에 따라 전국적으로 43개에 달하는 10호미만 미전화유인도서 및 벽지지역에 대한 전화사업의 필요성이 제기되었다. 10호미만 도서지역의 전화사업을 위하여 도서전화사업의 기본취지인 전력정책의 보편공급목표를 달성하면서 사회적 경제적비용을 최소화할 수 있는 방법의 채택이 요구되었다 본 연구에서는 대부분의 도서지역이 채택하고 있는 기존의 디젤방식과 최근 활발한 보급이 이루어지고 있는 태양광 풍력 등 신재생에너지에 의한 발전방식의 기술적 옵션에 대한 타당성 분석을 실시하였다. 10호미만 도서지역과 5호미만 벽지지역에 디젤엔진과 태양광 등 신재생에너지를 보급할 경우 발생될 기술적, 경제적 비용의 분석을 실시하였으며 연구 결과 소규모 도서지역과 벽지에서는 태양광이 디젤엔진보다 경제적인 대안으로 판명되었다.
임준석(Jun-Seok Lim),배위섭(Wi Sup Bae),손채훈(Chae Hoon Sohn) 대한기계학회 2009 대한기계학회 춘추학술대회 Vol.2009 No.11
Electrical submersible pump used for petroleum production on has the type of a multistage centrifugal pump that is suitable for large mass flow rates. Although there have been many studies on design and development of industrial pumps in Korea, a petroleum production pump has not been designed. In this study, as a preliminary work for designing an electrical submersible pump, an impeller and a volute are designed and the flow field in the pump is investigated numerically. For a baseline specification, the model of TJ 9000 manufacture by WOODGROUP Co. is selected, which has a flow rate of 1.1 ㎥/min and a head of 1587 m. First, with a specific speed of 191 given, an impeller is designed. From the flow simulation, velocity and pressure fields near a blade are found and then, the feasibility of the designed impeller is examined. Next, a volute pump equipped with the impeller is designed and its performance is calculated.
김형목(Hyung-Mok Kim),배위섭(Wi-Sup Bae) 한국암반공학회 2013 터널과지하공간 Vol.23 No.1
본 고에서는 CO₂ 지중저장과 연계한 원유회수증진 기술을 소개하였다. 원유회수증진을 목적으로 CO₂를 저류층 내에 주입하는 CO₂ EOR 기술은 장기적인 관점에서 CO₂를 지하 심부 암반에 저장하는 CCS 기술로 전환할 수 있다. CCS와 연계한 CO₂ EOR 기술은 EOR에 필요한 대규모 CO₂ 공급원을 확보할 수 있는 장점이 있으며 원유 회수율 증진에 따른 편익 발생으로 CCS를 위한 일련의 프로세스 중, 특히 포집 분야에 경제성을 부가할 수 있는 장점이 있다. 이러한 CCS와 연계한 CO₂ EOR 기술의 특징 및 시장 전망을 살펴보고 국외의 대표사례로 Weyburn CO₂ EOR 프로젝트를 소개하였다. 또한, 안정적이고 경제적인 CO₂ EOR 실시에 필요한 제반 기술 요소를 분석하고 CO₂ 주입중 및 주입후 장기운영과정에서의 미소진동 계측, CO₂의 최소혼화압력 및 최대주입압력의 사전설계 등의 암반공학적 쟁점들을 소개하였다. Enhanced oil recovery (EOR) technology coupled with underground carbon dioxide sequestration is introduced. CO₂ can be injected into an oil reservoir in order to enhance oil production rate and CO₂ EOR can be turned into CCS in a long term sense. Coupling CO₂ EOR with CCS may secure a large scale and consistent CO₂ source for EOR, and the CO₂ EOR can bring an additional economic benefit for CCS, since the benefit from enhanced oil production by CO₂ EOR will compensate costs for CCS implementation. In this paper, we introduced the characteristics of CO₂ EOR technology and its market prospect, and reviewed the Weyburn CO₂ EOR project which is the first large-scale CO₂ EOR case utilizing an anthropogenic CO₂ source. We also introduced geotechnical elements for a successful and economical implementation of CO₂ EOR with CCS and they were a miscroseismic monitoring during and after injection of CO₂, and determination of minimum miscible pressure (MMP) and maximum injection pressure (MIP) of CO₂.
FWKO 유수분리공정을 이용한 오일-물 혼합물의 분리특성
권순철 ( Soon Chul Kwon ),박근익 ( Kun Yik Park ),윤성민 ( Sung Min Yoon ),김주연 ( Joo Yeon Kim ),박찬영 ( Chan Young Park ),배위섭 ( Wi Sup Bae ),이영우 ( Young Woo Rhee ) 한국화학공학회 2011 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.49 No.6
오일-물 혼합물에서 물을 제거하기 위하여 FWKO(Free Water Knock Out) vessel에서의 물 분리특성에 대해 연구하였다. 오일을 모사하기 위해 데칸, 톨루엔, 아스팔트를 사용하였다. 데칸을 이용하여 프로토타입 vessel에서 기초실험을 수행하였으며, 기초실험결과를 토대로 최적 water cut이 0.8인 것을 알게 되었다. 이에 이어 톨루엔을 이용하여 성능평가를 실행한 결과로 최적 체류시간이 1,200 sec인 것을 알 수 있었고 아스팔트를 사용하여 방해판의 개수, 실험온도를 변수로 FWKO vessel에서의 최적의 물 분리조건에 대해 조사하였다. 최적의 분리조건은 방해판 3개, 온도 45 ℃ 였다. Characteristics of water separation in a FWKO(Free Water Knock Out) vessel was investigated to remove water from oil-water mixture. Decane, toluene, and asphalt were used as model oils. Preliminary experiments were carried out for decane in a prototype FWKO vessel. Based on the results of preliminary experiments, the prototype vessel was modified and its performance was evaluated by using toluene. The effects of experimental variables on the separation of oil-water mixture were evaluated in terms of separation efficiency. The experimental variables include water cut(water ratio), number of baffles, residence times, and operation temperatures. The optimum conditions of water separation were found to be 0.8 water cut, 3 baffles, 1,200 sec, and 45℃ .
윤성민 ( Sung Min Yoon ),박근익 ( Kun Yik Park ),김주연 ( Joo Yeon Kim ),한혜정 ( Hye Jung Han ),김태일 ( Tae Il Kim ),강경석 ( Kyung Seok Kang ),배위섭 ( Wi Sup Bae ),이영우 ( Young Woo Rhee ) 한국화학공학회 2011 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.49 No.6
오일 생산 과정에서 발생하는 부산물인 생산수(produced water)는 오일폐수(oily wastewater)의 대부분을 차지하기 때문에 환경적인 측면이나 자원적인 관점에서 볼 때, 생산수에서 오일성분을 추출 및 제거하는 기술은 매우 중요하다. 생산수 처리기술은 크게 물리적 방법과 생물학적 방법 그리고 화학적 방법으로 나눌 수 있다. 본 논문에서는 생산수의 오일제거 기술의 분류, 장단점 분석과 함께 연도별, 국가별, 출원인별, 세부기술별로 기술동향 특허분석을 하였다. Produced water from oil production processes is mostly composed of oily wastewater. So, it is important to extract and remove the oil components from the produced water environmentally and in utilizing water resources. Produced water treatment is classified as physical, biological and chemical method. The technology trend of oil treatment for produced water was analyzed based on patent application years, countries, main applicants, and each technologies.