http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
LLC 공진형 컨버터를 이용한 독립제어 가능한 2 채널 LED 구동회로
황민하(Min-Ha Hwang),최윤(Yoon Choi),한상규(Sang-Kyoo Han) 전력전자학회 2012 전력전자학회 논문지 Vol.17 No.2
The independently regulated dual-output LLC resonant converter using only one power stage and one control IC is proposed in this paper. The conventional dual-output LLC resonant converter requires the extra non-isolated DC/DC converter to obtain the tightly regulated slave output voltage, which results in the low power conversion efficiency and high production costs. On the other hand, since the proposed converter controls the master and slave output voltages by pulse width modulation(PWM) and pulse frequency modulation(PFM), it can achieve tightly regulated dual output voltages without the additional non-isolated DC/DC converter. Therefore, it features a high efficiency and low cost. To confirm the validity of the proposed converter, theoretical analysis and experimental results from a 40W LED driver prototype are presented.
비정질 IGZO재료의 결정화도 Clustering 연구
황민하(Minha Hwang),조성준(Sungzoon Cho) 대한전자공학회 2021 대한전자공학회 학술대회 Vol.2021 No.6
In this paper, we propose a method to quantify the crystallization properties of IGZO thin films, which are amorphous materials. A large amount of image information was processed using 4D-STEM, the most advanced technology for observing the current atom, and crystallization characteristics were compared through the FEM measurement method. As a result, the degree of crystallization of amorphous materials was compared through the first peak of radial variance, and clusters were automatically classified through the SOM method, which is one of unsupervised learning.
LLC 공진형 컨버터를 이용한 독립제어 가능한 2 채널 LED 구동회로
황민하(Min-Ha Hwang),최윤(Yoon Choi),오동성(Dong-Sung Oh),홍성수(Sung-Soo Hong),한상규(Sang-kyoo Han) 전력전자학회 2011 전력전자학술대회 논문집 Vol.2011 No.7
본 논문은 하나의 제어 IC로 이중출력 각각 독립 제어가 가능한 LLC 공진형 컨버터를 제안한다. 기존의 이중출력 LLC 공진형 컨버터의 경우 master 출력전압만 제어가 가능하므로, slave 출력의 정밀제어를 위해 별도의 DC/DC 컨버터가 필요하며, 이는 시스템의 전력 변환 효율을 떨어뜨리고 제작단가를 증가시키는 단점이 있다. 반면, 제안된 회로는 LLC 공진형 컨버터의 이중출력을 하나의 제어 IC로 주파수 및 시비율 각각 가변하는 방식으로 개별적 제어가 가능하므로 부하 및 입력전압 조건과 무관하게 모든 출력 전압의 제어를 정밀하게 할 수 있는 장점이 있다. 따라서 별도의 DC/DC 컨버터 사용이 불필요하므로 고효율 및 저가격의 특징을 가질 수 있다. 본 논문에서는 제안된 회로의 타당성 검증을 위해 이론적 분석결과를 제시하고 40W급 LED 조명회로에 적용한 실험 결과를 바탕으로 그 우수성을 확인한다.
고효율 및 고역률 LED 구동회로 위한 Balanced Forward-Flyback 컨버터
황민하(Min-Ha Hwang),강정일(Jeong-Il Kang),한상규(Sang-Kyoo Han) 전력전자학회 2013 전력전자학회 논문지 Vol.18 No.5
A balanced forward-flyback converter for high efficiency and high power factor using a foward and flyback converter topologies is proposed in this paper. The conventional AC/DC flyback converter can achieve a good power factor but it has the high offset current through the transformer magnetizing inductor, which results in a large core loss and low power conversion efficiency. And, the conventional forward converter can achieve the good power conversion efficiency with the aid of the low core loss but the input current dead zone near zero cross AC input voltage deteriorates the power factor. On the other hand, since the proposed converter can operate as the forward and flyback converters during switch turn-on and turn-off periods, respectively, it cannot only perform the power transfer during an entire switching period but also achieve the high power factor due to the flyback operation. Moreover, since the current balanced capacitor can minimize the offset current through the transformer magnetizing inductor regardless of the AC input voltage, the core loss and volume of the transformer can be minimized. Therefore, the proposed converter features a high efficiency and high power factor. To confirm the validity of the proposed converter, theoretical analysis and experimental results from a prototype of 24W LED driver are presented.
대형판 조립식 구조 수직접합부 지압강도 평가에 관한 연구
정란,조승호,황민하,Chung, Lan,Cho, Seung-Ho,Hwang, Min-Ha 한국콘크리트학회 1996 콘크리트학회지 Vol.8 No.4
PC판넬 조립식 구조는 다양한 접합부 상세로 인하여 구조적인 거동 규명이 매우 어려우므로 패널 상호 접합부 거동에 대하여 역학적 거동을 규명하고 이를 정립하여 실용적인 설계 방안이 제시되어야 할 필요가 있다. 이 연구는 대형판 조립식 구조의 수직접합부 전단키의 적절한 형상을 제안하여 전단내력을 결정하는 식 중 일반적으로 가장 작게 계산되는 전단키의 지압내력에 관한 식을 개선하는데 연구의 목적이 있다. 전단키 지압내력에 영향을 주는 그라우트의 압축 가도, 전단키의 각도 및 지압면적 등을 변수로 총 21개의 시험체를 제작하여 실험하였다. 실험결과를 분석.검토한 결과를 정리하면 그라우트의 압축 강도가 증가할 때에 지압내력은 강도 증가에 비례하여 증가하는 반면 지압면적에 대하여는 면적 증가에 비례하여 강도가 증가되지는 않았다. 또한 전단키를 이루는 각도는 지압내력에 중요한 영향을 미치며 전단키 각도가 $20^{\circ}$에 근접할 때에 최대지압내력값을 나타내었다. It is well-known that the hearing strength in vertical joints of precast concrete large panel system is affected by grout compressive strength angle of shear key and bearing area. 21 vertical joint specimens were tested to investigate the effects of these parameters The analysis of test results shows that : 1. The higher be grout compressive strength, the higher will shear strength be. And the bearing strength does not so increase in proportion of bearing area. 2. The shear key with the angle of $20^{\circ}$shows the highest bearing strength among three angle variables of $20^{\circ}$, $25^{\circ}$, $30^{\circ}$.