http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
CoO가 삽입된 NiO스핀밸브의 자기저항특성 향상에 관한 연구
곽동호(D. H. Kwak),김종기(J. K. Kim),이기암(K. A. Lee),황도근(D. G. Hwang),이상석(S. S. Lee),J. Ginsztler(J. Ginsztler),현준원(J. W. Hyun) 한국자기학회 2000 韓國磁氣學會誌 Vol.10 No.3
We inserted CoO layer in NiO spin-valves to improve on magnetoresistance and exchange coupling field. The magnetoresistance ratio was increased from 4.5 % to 5.5 % with the increase of CoO thickness. We can not find the dependence between (111) texture and exchange coupling by the measurement of XRD of CoO/NiO spin-valves. The surface roughness of CoO layer, 6.1 Å is twice more than that of NiO layer, 3.1 Å. The increase of exchange coupling field and coercive field in the CoO/NiO spin-valves will be due to increasing roughness. We prepared the NiO/CoO/NiO/CoO/NiO spin-valves to reduce coercive field and the coercive field decreased from 110 Oe to 50 Oe, and the coupling field is not changed from 70 Oe.
Fe[NiFe / Cu] 다층박막의 자기저항 효과에 대한 연구
박병숙(B. S. Park),백주열(J. Y. Beak),이기암(K. A. Lee),현준원(J. W. Hyun) 한국진공학회(ASCT) 1996 Applied Science and Convergence Technology Vol.5 No.3
d.c. magnetron sputtering 방법으로 제작된 Fe/[NiFe/Cu] 다층박막을 Fe 기저층의 두께, 적층횟수 및 열처리 온도 변화에 따라 자기저항비가 계면 거칠기 및 우선 배향에 미치는 영향에 대하여 조사하였다. Fe 기저층의 두께가 증가함에 따라(200) 우선배향의 세기가 증가하였으며, 자기저항비는 Fe 70Å의 두께에서 최대 값 4.7%를 보이며 이 때 자장 감응도(field sensitivity)도 최대를 나타낸다. Fe 기저층의 두께를 70Å으로 고정 시키고 적층횟수를 변화시켰을 때 40층에서 최대값 5.3%를 보였다. 열처리 온도에 따른 자기저항비는 300℃ 이하에서는 커다란 변화가 없으며, 300℃ 이상에서는 크게 감소하였는데, 이는 Cu의 확산에 의한 상자성 혼합층의 증가와 반강자성적으로 결합된 자성층간의 배열의 변화가 그 원인이다. We have investigated the changes in magnetoresistive characteristics, interfacial roughness, and preferred orientation with the Fe buffer layer thickness, annealing temperature, and the stacking number of layers variation in Fe/[NiFe/Cu] multilayers by using the 3-gun d.c. magnetron sputtering method. Intensity of the (200) orientation was increased with the increment of the Fe-buffer layer thickness. We found a maximum magnetoresistance ratio of 4.7%, when the buffer layer thickness was 70Å, and the field sensitivity also showed a maximum value at the same thickness. We varied the stacking number of multilayers with fixing the Fe buffer layer thickness of 70Å. When the stacking number was 40 layers, maximum MR ratio(5.3%) was observed. With the variation of annealing temperature no change in the MR ratio was found beyond 300℃. But, decrement of MR ratio was observed above 300℃. This decrement of the MR ratio was responsible for the increment of paramagnetic mixed layer caused by the diffusion of Cu layer and the change of antiferromagnetic coupling.
현준원,김나연,Hyun, J.W.,Kim, N.Y. 한국진공학회 2008 Applied Science and Convergence Technology Vol.17 No.6
Nickel Chloride coated protein chip plates were developed by using a spin coating method after $H_2$ plasma treatment. The adsorption ability of histidine tagged protein was investigated at various times of plasma treatment. The properties of the nickel chloride and protein on the surface of the slides were assayed using particle size analysis and the extent of the protein adsorption was determined by using a bio imaging analyzer system. The results show that the ability of protein adsorption decreased as increasing the time of $H_2$ plasma treatment. The mechanism on the ability of protein adsorption at the plate surface is discussed on results and discussions. The results also suggest that the surface stabilization of protein chip plates treated by plasma technology may be applicable in biosensor markets. 수소 플라즈마 처리된 유리 기판에 스핀 코팅 시스템을 이용하여 nickel chloride를 코팅하여 단백질칩 플레이트를 제조하였다. 다양한 플라즈마 처리 시간대에서 histidine tagged 단백질의 부착 능력 특성을 연구하였다. 유리 기판 표면에서 nickel chloride와 단백질 특성을 particle size analysis를 이용하여 관찰하였고, 단백질의 부착 능력 정도를 bio imaging analyzer system으로 측정하였다. 실험 결과에 따르면, 플라즈마 처리 시간이 증가할수록 단백질 부착 능력은 감소하는 것으로 나타났다. 기판 표면에서의 단백질 부착능력 특성에 관한 mechanism은 본문의 결과 및 토의에서 논의되었다. 플라즈마 처리된 단백질칩 기판에 대한 표면 안정화는 바이오센서 시장에서 큰 관심을 끌 것으로 기대된다.