http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
기생 패치의 결합 특성을 이용한 빔 틸팅 마이크로스트립 패치 배열 안테나 설계
하재권,박동철 한국전자파학회 2003 한국전자파학회논문지 Vol.14 No.2
본 논문에서는 기생 패치와 구동기 패치가 서로 다른 층에서 H-plane 에지 결합과 broadside 결합을 통해 고이득과 큰 틸팅 각도를 얻을 수 있는 위성 방송 수신용의 마이크로스트립 패치 배열 안테나를 제안하였다. 제안된 안테나는 고가의 유전체 기판 대신에 폴리에스터 동장 적층 필름과 폼을 사용하여 16$\times$8 배열로 설계 제작되었으며, 이득 22.9 dBi, 3dB 빔 폭 4.6$^{\circ}$, 그리고 broadside 방향에서 43.9$^{\circ}$기울어진 빔 특성을 가지고 있다. In this paper, we proposed a microstrip patch array antenna for DBS reception which had high gain and high tilted angle through mutual coupling driver patch to parasitic patch in H-plane edge and broadside direction in different layers. It was designed and fabricated in 16$\times$8 array by using low cost polyester based copper-clad laminate and foam instead of high cost dielectric substrate. It had gain of 22.9 dBi, beamwidth of 4.6$^{\circ}$, and tilted angle from broadside direction of 43.9$^{\circ}$.
빔 틸팅 특성을 갖는 개구 급전 마이크로스트립 안테나 설계 연구
하재권,박동철 한국전자파학회 2001 한국전자파학회논문지 Vol.12 No.5
본 논문에서는 다이폴 야기 배열 안테나의 동작 원리를 개구 급전 마이크로스트립 패치 안테나에 적용하여 틸티드 빔(tilted beam) 특성을 가지는 패치 안테나를 제안하고 그 특성을 실험적으로 고찰하였다. 제안된 안테나는 구동 패치, 반사 패치, 유도 패치들의 크기, 각 패치 간 간격, 유전체 기판의 두께와 유전율, 그리고 급전 방법 등에 의해 성능 변화 및 특성이 좌우되기 때문에, 본 논문에서는 이득과 빔 틸팅에 큰 영향을 미치는 변수들을 찾아내고 이들에 의한 성능 trade-off을 통해 빔 틸티드 개구 급전 마이크로 스트립 패치 안테나를 설계 제작하고 반사 손실과 빔 패턴에 대한 설계 및 측정 결과를 비교 분석하였다. 제작된 안테나는 공진 주파수인 2.58 GHz에서 앙각 방향에서의 주 빔은 45$^{\circ}$틸티드 특성을 가지고 있으며, 시뮬레이션 빔 패턴과 잘 일치하는 것을 확인하였다. In this paper, a new type of aperture coupled microstrip patch antenna with tilted-beam based on the principal of the dipole yagi antenna is proposed and investigated experimentally. Its configuration is composed by 3 types of patches; reflector, driver, and director. Tilted beam patterns are effected by many parameters as those of dipole yagi antenna; sizes of the patches, gaps between the patches, characteristics of the substrates, feeding method and etc. Therefore, in this paper, the effects of varying design parameters of this antenna are studied with a goal of enhancing the gain and tilting the beams. A microtrip patch antenna with tilted beam based on performance trade-offs is designed and fabricated. Measured and simulated results for return loss and radiation patterns are presented. It has 45$^{\circ}$ tilted beam and very close to simulation beam pattern at resonant frequency, 2.58 GHz.
하재권,이종원,김홍주,최동경,Ha, Jae-Gwon,Lee, Jong-Won,Kim, Hong-Ju,Choe, Dong-Gyeong 한국전자통신연구원 1987 전자통신 Vol.9 No.2
본고에서는 광전송 시스팀의 운용 및 유지보수에 관한 감시제어의 개요와 일반적인 원칙을 서술하고 외국의 광전송 시스팀의 감시제어 장치를 살펴보는 한편, 본 연구실에서 개발될 감시제어 장치의 개발 방향을 제시한다.
다층 구조 빔 틸트 마이크로스트립 패치 배열 안테나 설계
하재권,박동철 충남대학교 공업교육연구소 2002 論文集 Vol.25 No.1
In this paper, the characteristics and the effects of the resonant frequency and beam pattern of the antenna which is coupled with parasitic patch are studied. A beam tilt microstrip patch array antenna using multi-layer structure is designed based on performance trade-offs between design parameters and fabricated by using the polyester based copper-clad laminates and foams instead of using the substrate which is thick and has low dielectric constant. The proposed H-plane coupled antenna, which is a 16×8 beam tilt microstrip patch array antenna for DBS reception by using the principle of the dipole Yagi antenna, has the non-radiation edge and broadside coupling. The peak beam of this fabricated antenna is directed 43.8˚from the broadside direction with the gain of 22.9 dBi and its half power beamwidth is about 4.6˚. The fabricated antenna received the DBS signal from the KOREASAT 3 very well by only adjusting the azimuth direction.