http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고속 열 확산에 의한 얕은 접합 형성과 Ti-실리시이드화된 $n^+$ -p 다이오드 특성 분석
최동영,이성욱,주정규,강명구,윤석범,오환술 대한전자공학회 1994 전자공학회논문지-A Vol.31 No.8
The ultra shallow junction was formed by 2-step RTP. Phosphorus solid source(P$_{2}O_{5}$) was transfered on wafer surface during RTG(Rapid Thermal Glass Transfer) of which process condition was 80$0^{\circ}C$ and 60sec. The process temperature and time of the RTD(Rapid Thermal Diffusion) were 950~105$0^{\circ}C$ during 5~15sec respectively sheet resistances were measured as 175~320$\Omega$/m and junction depth and dopth and dopant surface concentration were measured as 0.075~0.18$\mu$m and 5${\times}10^{19}cm^{4}$ respectively. Ti-silicide was formed by 2-step RTA after 300$\AA$ Titanium was deposited. The 1st RTA (2nd RTA) was carried out at the temperature of $600^{\circ}C$(700~80$0^{\circ}C$) for 30 seconds (10~60 seconds) under N$_2$ ambient. Sheet resistances after 2nd RTA were measured as 46~63$\Omega$/D. Si/Ti component ratio was evaulated as 1.6~1.9 from Auger depth profile. Ti-Silicided n-p junction diode (pattern size : 400$\times$400$\mu$m) was fabricated under the RTD(the process was carried out at the temperature of 100$0^{\circ}C$ for 10seconds) and 2nd RTA(theprocess was carried out at the temperature of 750$^{\circ}C$ for 60 seconds). Leakage current was measured 1.8${\times}10^{7}A/mm^{2}$ at 5V reverse voltage. Whent the RTD process condition is at the temperature of 100$0^{\circ}C$ for 10seconds and the 2nd RTA process condition is at the temperature of 75$0^{\circ}C$ for 60 seconds leakage current was 29.15${\times}10^{9}A$(at 5V).
최동영,최재칠,한종욱,Choi, Dong Young,Choi, Jae Chil,Han, Jong Uk 한국자동차안전학회 2015 자동차안전학회지 Vol.7 No.1
In vehicle development process, durability test should be carried out in field condition. Nowadays there are many customer live there multiple conditions. It makes change of the car's material. Such change causes to lose a bolt. Diversifications of climatic conditions are also a matter of loosening the bolt. To avoid this problem, to identify the cause of the problem, and the solution should be applied. To avoid problems during the durability development test should be measured by the clamping force. Ultrasonic instruments clamping force without affecting the torque can be measured. This instrument is part of the problem by monitoring the clamping force required to obtain objective data.
고성능 차량의 휠 볼트 풀림 영향인자 분석 및 체결력 증대 방안 연구
최동영 한국신뢰성학회 2018 한국신뢰성학회 학술대회논문집 Vol.2018 No.10
최근 개발되고 있는 고성능 차량은 기존 차량 대비 동력 성능이 증대 되고 있다. 이에 따라 휠에 작용하는 외력 또한 증가되고 있다. 이와 더불어 서킷 주행 시 타이어의 소모가 많아 기본차량 대비 더 잦은 휠 너트 재체결의 상황에 노출되어 있다. 허나, 이런 고성능 차량의 특징에 대한 고려가 이루어 지지 않아 필드에서 품질 문제 발생이 우려 된다. 이에 본 연구는 차량의 휠 볼트의 풀림 메커니즘에 대해 분석해 보고, 풀림 검증을 위한 모드 설정 시 필요한 외력을 연구 하였다. 또한 체결력 증대 방안 경향에 대해 연구하였다. 먼저 휠 허브 볼트에 작용하는 응력값을 계측하여 주행 시 휠 볼트에 작용하는 힘에 대해 확인 하였다. 내구를 위해 주행하는 각각의 다양한 노면의 계측 결과 선회에 의한 횡력 부하시 휠 허브 볼트(휠 너트)의 축력 변화가 가장 크다. 또한 선회 후 축력이 떨어지는 정도가 타노면 대비 큼을 알 수 있다. 또한 초기 체결력과 휠 허브 볼트에 작용하는 외력의 크기를 비교하여 낮은 체결력은 볼트풀림에 영향을 미치는 것을 알 수 있다. 초기 축력에 따른 휠 허브 볼트의 인장/압축 응력과 동일 모드 주행 후 축력 저하 정도를 알 수 있다. 이는 볼트 풀림에 있어 체결 수직 방향의 전단응력 뿐 아니라 축 방향의 인장압축에 의해서도 풀림을 알 수 있다. 최근 뉘버그링 내구 중 발생한 휠 볼트 풀림은 위와 같은 초기 축력의 저하로 인해 반복 하중작용으로 풀림 문제가 발생 되었다. 반복적인 휠 너트의 재체결은 토크를 스펙으로 관리하는 프로세스에서 체결부의 필요 체결 축력을 확보하는데 어려움이 있다. 표면처리가 재체결 시 마찰에의한 마모로 변형되어 접촉면의 마찰 계수를 상승 시켜 결과적으로 체결 축력의 저하를 일으킨다. 재체결에 따른 크롬도금 휠 너트의 동일 토크에서의 축력 변화를 나타낸다. 이를 바탕으로 재체결에 따른 축력 저하를 막기 위해서 표면의 마찰계수를 일정하게 유지할 수 있는 방법이 필요하다. 또한 초기 축력값이 증대되면 풀림에 강건한 상황이 된다. 동일 Cone 타입의 휠 너트지만 표면처리와 형상에 따라 초기 축력값이 변화된다. 표면처리와 형상에 다른 초기 축력값의 차이를 알 수 있다. 형상적으로 60° 경사가 있는 Cone 타입은 평면 체결 보다 동일 토크 체결 시 축력값이 작다. Cone 타입과 평면 타입의 토크체결에 따른 축력 차이를 볼 수 있다. 이는 휠 너트 가 접촉되는 좌면이 경사짐에 따라 각 작용하는 축력이 Cos30°씩 줄어든 값이 작용하기 때문이다.
Attenuation of Scopolamine-induced Cognitive Dysfunction by Obovatol
최동영,홍진태,이영중,Sun Young Lee,Yoot Mo Lee,Hyun Hee Lee,Im Seop Choi,오기완,한상배,남상윤 대한약학회 2012 Archives of Pharmacal Research Vol.35 No.7
Alzheimer’s disease (AD) is the most prevalent cause of dementia in the elderly people. The disease is pathologically characterized by extracellular deposition of beta-amyloid peptide (Aβ), cholinergic neurodegeneration and elevation of acetylcholine esterase (AChE) activity in the affected regions. In this study, we investigated the effects of obovatol on memory dysfunction,which was caused by scopolamine. Obovatol (0.2, 0.5 and 1 mg/kg for 7 day) attenuated scopolamine (1 mg/kg, i.p.)-induced amnesia in a dose-dependent manner, as revealed by the Morris water maze test and step-through passive avoidance test. Mechanism studies exhibited that obovatol dose-dependently alleviated scopolamine-induced increase in Aβ generation and β-secretase activity in the cortex and hippocampus. Obovatol also attenuated scopolamine-induced rise in AChE activity in the cortex and hippocampus. Obovatol might rescue scopolamine-mediated impaired learning and memory function by attenuating Aβ accumulation and stabilizing cholinergic neurotransmission, which suggests that the natural compound could be a useful agent for the prevention of the development or progression of AD neurodegeneration.
최동영,최혁재 대한약학회 2015 Archives of Pharmacal Research Vol.38 No.2
Continuous increases in the incidence of neurodegenerativediseases, such as Alzheimer’s disease (AD),Parkinson’s disease (PD), and brain stroke demand theurgent development of therapeutics. Marine organisms arewell-known producers of natural products with diversestructures and pharmacological activities. Therefore,researchers have endeavored to identify marine naturalproducts with neuroprotective effects. In this regard, thisreview summarizes therapeutic targets for AD, PD, andischemic brain stroke and marine natural products withpharmacological activities on the targets according totaxonomies of marine organisms. Furthermore, severalmarine natural products on the clinical trials for the treatmentof neurological disorders are discussed.