http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김종성,채일수,Kim, Jong Sung,Chae, Il Soo 한국강구조학회 2015 韓國鋼構造學會 論文集 Vol.27 No.6
In long span steel structure, the plate girder reinforced with stiffeners are commonly used. When choosing the cross section with deep depth of girder as well as narrow width, however, out of plane buckling can be a problem due to web slenderness. In an effort to solve this issue, current study determined the applicability of using corrugated web girder with deep depth as bending member, which is generally being utilized in both factory and warehouse nationwide. To accomplish this, we performed the loading test of H-shaped beam with sinusoidal corrugated web. Corrugated web CP-2.3 specimen exhibited 12% less maximal bending strength but CP-3.2 specimen exerted 24% increase in strength compared to plate web P-4.5. this result indicates that corrugated web provides enough strength even with unfavorable width-thickness ratio of plate. And bending as well as shear strength estimated by the Eurocode (EN 1993-1-5) were compared with both bending strength by loading test and shear strength estimated by KBC2009. In case of eurocode, increase in plate thickness did not help in bending performance improvement. moreover, shear performance was sensitive to the thickness of the web folds and the shape of the web plate. 강구조물에서 장스팬의 경우, 일반적으로 스티프너로 보강된 플레이트거더를 많이 사용하는데, 보(girder)의 춤이 크고 웨브의 폭이 좁은 단면을 선택하는 경우는, 웨브가 세장해져서 면외좌굴이 문제가 된다. 이를 해결하기 위한 방안으로, 이 연구에서는 국내에서도 공장, 창고건물을 중심으로 많이 사용되고 있는, 춤이 큰 주름 웨브 보를 휨재로 사용했을 때, 그 적용가능성을 판단하기 위하여, 그 선행작업으로, 주름 웨브(파형, Sinusoidal)를 가진 H형 단면보의 재하실험을 실시하였다. 평판웨브 P-4.5실험체에 비해서 주름웨브 CP-2.3실험체는 최대 휨내력은 12% 부족했지만, CP-3.2 실험체는 약 24% 내력상승이 나타났다. 이는 주름웨브 보는 평판보보다 불리한 판폭두께비를 가진 경우에도 충분한 내력확보가 가능함을 의미한다. 그리고 유로코드(EN 1993-1-5)에 의하여 산정된 휨 내력 및 전단내력을, 재하실험에 의한 휨내력과 KBC2009에 의한 전단내력을 비교하였다. 유로코드에서는 주름웨브의 판두께 증가는 휨성능 향상에 도움이 안 되며, 전단성능은 웨브 판두께와 주름 웨브의 형상에 민감함을 알았다.
박한민,이희두,신경재,이수헌,채일수 한국강구조학회 2017 韓國鋼構造學會 論文集 Vol.29 No.6
Steel beams with corrugated web have been widely used in the steel structures. However, it is challenging to weld the section between the corrugated web and the flange straight, which increases the cost of production. In order to solve this issue, steel beam with intaglio and embossed web (It is called an IEB) was invented. A web with embossment is produced by cold pressing and welded to flange by automatic welding machine. The loading tests were conducted to investigate the load-carrying capacity of IEB, and its test result was compared with that of H-shaped beam having a same size of flange and web. The test results of IEB series showed about 40% higher load capacities than H-shaped series. As a result of comparing the IEB specimen with Eurocodes for steel beams with corrugated web, all of specimens tested in this study did not meet the design value. Therefore, it is difficult to apply existing formula to IEB and new design formula should be presented for field application. 주름웨브는 강구조물에서 세장해진 웨브의 대안으로 널리 사용되고 있으나 주름진 웨브와 플랜지 사이의 용접은 제작비용의 상승이라는 문제점을 안고 있다. 이러한 경제적인 문제점을 해결하기 위해, 엠보싱웨브를 가지는 보(이하, 엠보싱웨브 보)를 개발하게 되었다. 엠보싱웨브는 냉간프레스 가공에 의하여 형성되고, 웨브와 플랜지는 기계화자동용접에 의하여 접합된다. 엠보싱웨브 보의 구조적 성능을확인하기 위해, 동일한 크기의 일반 H-형강 실험체도 제작되었고 가력실험이 수행되었다. 실험에 의하여 엠보싱웨브 보 실험체는 H-형강실험체에 비하여 강도면에서 약 40%정도의 높은 성능을 보였다. 엠보싱웨브 보와 주름웨브 보의 형상은 다르지만, Eurocodes의 주름웨브보 설계식을 이용하여 엠보싱웨브 보의 내력을 예측한 결과 실험결과값과는 상이한 결과를 보였다. 따라서 기존 Eurocodes를 엠보싱웨브보에 적용하는 것은 무리가 있으므로 엠보싱웨브 보의 현장사용을 위해서는 적절한 설계식이 제안되어야 할 것으로 판단한다.
Push-out 실험을 통한 앵글형 전단연결재의 내력 평가
이민기,신경재,이준섭,채일수 한국강구조학회 2019 韓國鋼構造學會 論文集 Vol.31 No.6
Recently, as the amount of composite members used for economical use of materials has increased, researches on shear connectors that connect steel and concrete have been actively conducted. In general, stud anchors are used, and many researches on them are ongoing. However, there are not many studies on specimens using different shear connectors. In this study, the strength and performance of angle shear connectors are evaluated. Therefore, in this experiment, the experiment was carried out using the height and thickness of the shear connectors as variables. In addition, the height of the anchor will affect the test results. So this study suggest the need to consider the height by reviewing the design formula. 최근에 재료의 경제적인 사용을 위해 합성부재의 사용이 증가함에 따라 강재와 콘크리트를 연결하는 전단연결재에 대한 연구가 활발히 이루어지고 있다. 일반적으로는 스터드 앵커가 사용되며, 다양한 형태의 전단연결재에 대한 연구가 진행 중이다. 본 연구에서는 앵글형 전단연결재의 높이와 두께를 변수로 실험을 진행하였다. 전단연결재의 높이가 실험결과에 영향을 미칠 것으로 예상되며, 현재 설계식에서 고려되지 않는 앵글의 높이에 대한 고려의 필요성을 판단하였다. 실험에 사용된 앵글형 전단연결재는 두께에 많은 영향을 받으며 높이에 대해서도 어느정도 영향을 받는 것으로 판단하였다.