http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
ECG 신호의 가변적인 전력선 잡음 제거를 위한 적응형 차감기법
전홍규,조익성,권혁숭,Jeon, Hong-Kyu,Cho, Ik-Sung,Kwon, Hyeog-Soong 한국정보통신학회 2011 한국정보통신학회논문지 Vol.15 No.2
전력선 잡음은 ECG 신호 분석에 있어 특정 구간의 왜곡을 발생시킬 수 있다. 특히 P와 R파와 같이 부정맥 진단에 중요한 요소가 되는 구간은 전력선 주파수가 샘플링 주파수의 배수(multiple)일 경우와 그렇지 않을 경우에 각각 다른 형태의 잡음으로 나타나며, 잡음의 특성 또한 선형과 비선형으로 나누어진다. 본 논문에서는 ECG 신호의 가변적인 전력선 잡음 제거를 위한 적응형 차감 기법을 제안한다. 제안한 방법은 먼저 전력선 주파수와 샘플링 주파수와의 배수 관계를 multiple과 non-multiple로 구분한 후 각 구간에 대한 선형성 여부를 판단한다. 이후 선형 구간은 이동평균 필터를 이용하여 잡음성분을 추출하고, 비선형 구간 잡음은 선형구간에서 추출되어 임시버퍼에 저장된 잡음 성분을 이용하여 추출한다. 제안한 기법의 P파와 R파 검출성능을 평가하기 위해 MIT-BIH 데이터베이스의 119번 레코드를 사용하였다. 실험 결과 기존 노치 필터의 경우 P파 97.91%, R파 96.66%, 제안한 차감기법의 경우 P파 99.01%, R파 97.93%의 검출결과를 나타내었다. Power-line interference(PLI) can distort certain regions in analysing the ECG signal. In particular, the regions such as P and R wave that are important element in diagnosing with arrhythmia is expressed as different type of noise according to the case whether power-line frequency is multiples of sampling frequency and or not. Noise characteristics is also divided into linearity and non-linearity. In this paper, adaptive subtraction method for removing variable PLI of ECG signal is proposed. We classify the multiple relationship between power line and sampling frequency as Multiple and Non-multiple. PLI of Linear segment is extracted through moving average filter, PLI of non-linear segment is extracted through the interference component that is extracted in the linear segment and stored in the temporary buffer. The performance of P wave and R wave detection is evaluated by using 119 data record of MIT-BIH arrhythmia database. The achieved scores indicate P wave detection rate of 97.91%, R wave detection rate of 96.66% and P wave detection rate of 99.01%, R wave detection rate of 97.93% accuracy respectively for Notch filter and proposed subtraction method.
전홍규,조익성,권혁숭,Jeon, Hong-Kyu,Cho, Ik-Sung,Kwon, Hyeog-Soong 한국정보통신학회 2009 한국정보통신학회논문지 Vol.13 No.11
조기심실수축(Premature Ventricular Contractions, PVC)은 부정 맥 중 가장 빈번히 나타나는 심장질환으로 위험한 상황으로 발전할 가능성을 가지고 있다. 따라서 이의 검출은 심장질환에 대한 예방과 추후 발생여부에 대한 기초조사로서 매우 중요하다. 지금까지 PVC를 검출하는 많은 방법이 연구되어 왔으나 기존의 방법들은 잡음의 영향을 많이 받고 P파의 존재 유무에 의존적이기 때문에 검출의 정확도가 떨어지며, 처리시간이 많이 소요되기 때문에 실시간 검출에는 많은 어려움이 따른다. 이러한 문제점을 극복하기 위해 본 논문에서는 리듬분석과 비트매칭을 통한 PVC검출 방법을 제안한다. 이를 위해 전처리 과정 후 R 파를 검출하고, RR 간격의 리듬분석과 QRS 폭간격의 비트 매칭을 통해 비트 유형을 결정하는 알고리즘을 개발하였다. 제안한 알고리즘의 R파 및 PVC 검출 성능을 평가하기 위해 MIT-BIH 부정맥 데이터베이스를 사용하였다. 성능평가 결과, R파의 sensitivity는 99.74%, positive predictivity는 99.81%, PVC의 sensitivity는 93.91%, Positive predictivity는 96.48%의 검출 결과를 나타내었다. Premature ventricular contractions are the most common of all arrhythmias and may cause more serious situation in some patients. Therefore, the detection of this arrhythmia becomes crucial in the early diagnosis and prevention of possible life threatening cardiac diseases. Most of the algorithms detecting PVC reported in literature is not always feasible due to the presence of noise and P wave making the detection difficult, and the process being time consuming and ineffective for real time analysis. To solve this problem, a new approach for the detection of PVC is presented based rhythm analysis and beat matching in this paper. For this purpose, the ECG signals are first processed by the usual preprocessing method and R wave was detected. The algorithm that decides beat type using the rhythm analysis of RR interval and beat matching of QRS width is developed. The performance of R wave and PVC detection is evaluated by using MIT-BIH arrhythmia database. The achieved scores indicate sensitivity of 99.74%, positive predictivity of 99.81% and sensitivity of 93.91%, positive predictivity of 96.48% accuracy respectively for R wave and PVC detection.
전홍규(Hong-Kyu Jeon),오동욱(Dong-Wook Oh),박병규(Byung-Kyu Park),이준식(Joon-Sik Lee) 대한기계학회 2006 대한기계학회 춘추학술대회 Vol.2006 No.11
Numerical simulations are conducted for the optimization of a thermal mass air flow sensor with silicon-nitride (Si₃N₄) thin membrane structure. This study aims to find the optimal location of temperature sensors on the thin membrane, where the higher sensitivity can be achieved, for the development of a MEMS fabricated thermopile mass air flow sensor which is driven in a constant heater temperature mode. The simulations, thus, focus on the membrane temperature profile according to variation of the flow velocity. The flow velocity of the simulations is ranging from 2 ㎧ to 40 ㎧, and the corresponding Reynolds numbers vary from 1000 to 11000.
수직 원형관에서 난류 초임계 이산화탄소 유동의 열전달 현상에 대한 실험적 연구
전홍규(Hong Kyu Jeon),김종규(Jong Kyu Kim),유정열(Jung Yul Yoo),이준식(Joon Sik Lee) 대한기계학회 2005 대한기계학회 춘추학술대회 Vol.2005 No.5
Experiments are performed in a vertical circular tube to investigate heat transfer characteristics of the turbulent supercritical flow. Temperature distributions along the tube are measured at conditions of various inlet temperatures, heat fluxes and mass velocities. Corresponding Grashof numbers and Reynolds numbers are in the range of 2×10? to 5.4×10? and 3×10⁴ to 1.4×10?, respectively. At specific experimental conditions, the local wall temperature peaks are observed due to heat transfer deterioration. Based on results, the heat transfer deterioration criteria for a circular tube is determined in terms of heat flux and mass velocity.
전홍규(Jeon, Hong Kyu),이지영(Lee, Ji Yeong) 한국측량학회 2020 한국측량학회 학술대회자료집 Vol.2020 No.7
응급환자는 신속한 치료를 요하며 중증 응급환자들은 30분만 처치시간을 앞당겨도 생존률이 50%증가한다고 할 정도로 신속한 이송이 필요하다. 그러나 지역외상센터를 기준으로 환자발생위치로부터 최속거리 등 정해진 시간내에 도착할 수 있는지에 대한 분석이 되어있지 않다. 이에 본 연구에서는 위치정보로 변환된 환자발생위치와 표준노드링크, 강원도 의료기관등을 이용하여 경로분석을 진행한다.
주기 발열 파형을 이용한 열식 질량 유량계의 특성에 관한 수치적 연구
전홍규(Hong Kyu Jeon),오동욱(Dong Wook Oh),박병규(Byung Kyu Park),이준식(Joon Sik Lee) 대한기계학회 2007 대한기계학회 춘추학술대회 Vol.2007 No.5
Numerical simulations are conducted for the analysis of a thermal mass air flow sensor with periodic heating pulses on silicon-nitride (Si₃N₄) thin membrane structure. This study ai㎳ to find the locations of temperature sensors on the thin membrane and the heating pulse conditions, that the higher sensitivity can be achieved, for the development of a MEMS fabricated mass air flow sensor which is driven in periodic heating pulse. The simulations, thus, focus on the membrane temperature profile according to variation of the flow velocity, heating duration time and imposed power. The flow velocity of the simulations is ranging from 3 ㎧ to 35 ㎧, heating duration time from 1 ㎳ to 3 ㎳ and imposed power from 50 ㎽ to 90 ㎽. The corresponding Reynolds numbers vary from 1000 to 10000.
CO₂ 환경하에서 접촉 표면에 적용한 마이크로 딤플 패턴이 마찰 및 마멸에 미치는 영향 연구
전홍규(Hong-Gyu Jeon),한규철(Kyu-Cheol Han),최진호(Jin-Ho Choi),김규만(Gyu-Man Kim),조성욱(Sung-Ouk Cho),이영제(Young-Ze Lee) 한국트라이볼로지학회 2008 한국윤활학회지(윤활학회지) Vol.24 No.6
Due to the environmental concerns, especially the greenhouse effect and GWP (Global Warming Potential), the carbon dioxide was investigated as an alternative natural refrigerant to replace HFCs (HydroFluoroCarbons) in refrigerator or air conditioning systems. Because new compressor with carbon dioxide is going to be operated under the high pressure, the tribology of sliding surfaces in the compressor becomes very important. To improve of wear resistance in compressor parts, especially rotary type, the friction and wear characteristics of improved sliding surfaces between vane and flange were evaluated in this paper. The method of reformed sliding surface, such as micro-dimple processes, was applied on surfaces in order to improve the tribological characteristics, and their performances were evaluated experimentally. The vane-on-flange type lubricated sliding tests were performed with a high pressure wear tester using carbon dioxide. Test results showed that the reformed surfaces were very effective to reduce the friction and the wear amounts of vane surfaces. The method of improved surfaces showed good tribological properties at vane and flange.