http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고온에 노출된 콘크리트 중공체의 종류에 따른 내화성능 평가
전현구(Jeon, Hyun-Gu),조수민(Jo, Su-Min),양근혁(Yang, Keun-Hyeok) 대한건축학회 2023 대한건축학회 학술발표대회 논문집 Vol.43 No.2
In this study we evaluated whether the type of hollow body affects the fire resistance performance when hollow concrete is exposed to high temperatures. Concrete with EPS and concrete with paper were exposed to high temperatures and compared according to design strength (Fck). As a result the lower the Fck, the more fire-resistant the EPS hollow body was, and the higher the Fck, the more fire-resistant the paper hollow body was evaluated.
전자주입에 의해 야기되는 MOS 소자의 전류-전압 특성 분석
全賢求(Hyungoo Jeon),崔成佑(Sungwoo Choi),安昞澈(Byungchul Ahn),盧用翰(Yonghan Roh) 大韓電子工學會 2000 電子工學會論文誌-SD (Semiconductor and devices) Vol.37 No.11
금속-산화막-반도체 소자의 산화막에 존재하는 느린 준위에 의한 전류반응 특성을 양방향 전류-전압 측정기술을 적용하여 분석하였다. 게이트 바이어스에 따라 나타나는 충전 및 방전시의 순간전류를 유지시간, 지연시간, 전자주입 방향 및 전자주입량, 그리고 전자 주입 후 상온 방치시간의 함수로서 조사하였다. 느린 준위의 전하교환에 따른 전류 성분을 게이트 전압에 따라 실리콘 내 캐리어의 이동에 의해 나타나는 변위전류와 분리하여 해석하였다. 충전 및 방전시 나타나는 전하교환 전류는 산화막내 정전하 밀도뿐만 아니라 계면준위 밀도에도 크게 의존이 되며, 본 연구에서는 느린 준위의 전하교환 메카니즘을 제시하였다. A simple two-terminal cyclic current-voltage(Ⅰ-Ⅴ) technique was used to measure the current-transients in metal-oxide-semiconductor capacitors. Distinct charging/discharging currents were measured and analyzed as a function of the hold time, the delay time, the gate polarity during the FNT electron injection, the injection fluence and the annealing time after the injection had stopped The charge-exchange current was distinguished from total current-transients containing the displacement current components. Charging/discharging current caused by the charge exchange was strongly dependent not only on the density of postive charges in the SiO₂, but also on the density of interface traps generated during the FNT electron injection. Several tentative mechanisms were suggested.
전현구(Hyeon-gu Jeon),엄기진(Ki-Jin Eom),목성균(Seong-Kyun Mok),조은선(Eun-Sun Cho) 한국정보과학회 2016 정보과학회 컴퓨팅의 실제 논문지 Vol.22 No.4
프로그램의 안정성을 높이기 위해서 개발자는 크래시를 대량으로 발생시키는 퍼징 도구를 사용한 테스트를 통해 미리 취약점을 확인한 후 수정 보완한다. 이 때 개발자는 보안 위험도가 높은 취약점을 중요하게 간주하여 먼저 수정 보완함으로써 해커의 공격을 미연에 방지하게 된다. 그러나 개발자는 일반적으로 보안에 대한 지식이 많지 않으므로, 취약점에 대한 보안 위험도 판별을 도구에 의존하게 된다. 본 논문에서는 크래시를 보안 위험성에 따라 분류하는 정적 분석기반의 도구를 제안하여 궁극적으로 개발자가 신뢰성 있는 프로그램을 제작할 수 있도록 돕는다. 본 도구는 크래시 발생지점 이후부터 정적 오염분석을 하여 해당 크래시가 공격 가능한지를 분석 확인함으로써, 보안 위험도가 높은 크래시를 탐지하게 된다. 특히, 본 논문에서는 동일한 크래시 집합에 대해 MSEC의 !exploitable과 비교 실험하였다. To enhance the reliability of programs, developers use fuzzing tools in test processes to identify vulnerabilities so that they can be fixed ahead of time. In this case, the developers consider the security-related vulnerabilities to be the most critical ones that should be urgently fixed to avoid possible exploitation by attackers. However, developers without much experience of analysis of vulnerabilities usually rely on tools to pick out the security-related crashes from the normal crashes. In this paper, we suggest a static analysis-based tool to help developers to make their programs more reliable by identifying security-related crashes among them. This paper includes experimental results, and compares them to the results from MSEC !exploitable for the same sets of crashes.
목성균(Seong-Kyun Mok),전현구(Hyeon-gu Jeon),조은선(Eun-Sun Cho) 한국정보보호학회 2017 정보보호학회논문지 Vol.27 No.1
해커들이 자신들이 만든 악성코드의 분석을 어렵게 하기 위하여 코드 난독화 기법을 적용하고 있다. 최근의 난독화 기법은 가상화 난독화 기법을 통해 원래의 코드를 바이트코드로 만들고 가상머신이 이를 실행시키는 방식으로, 실행시키기 전에는 원래의 코드를 알 수가 없다. 프로그램 슬라이싱은 프로그램 분석기술 중 하나로 슬라이싱 기준을 정하고 그와 관련된 문장을 추출해내는 기술이다. 본 논문에서는 슬라이싱 기법을 사용하여 난독화를 해제하는 방법을 제시한다. Hackers have obfuscated their malware to avoid being analyzed. Recently, obfuscation tools translate original codes into byte codes to use virtualized-obfuscation, so that byte codes are executed by virtual machines. In such cases, malware analysts fail to know about the malware before execution of the codes. We found that program slicing is one of promising program analysis techniques to solve this problem. The main concepts of program slice include slicing criteria given by analysts and sliced statements according to the slicing criteria. This paper proposes a deobfuscation method based on program slicing technique.
고온에 노출된 중공 슬래브의 골재 종류에 따른 내화성능 평가
조수민(Jo, Su-Min),김대성(Kim, Dae-Seong),김대연(Kim, Dae-Yeon),전현구(Jeon, Hyun-Gu) 대한건축학회 2023 대한건축학회 학술발표대회 논문집 Vol.43 No.2
In this study, As the industry developed, large and long tunnels were created, and the ventilation facilities inside the tunnels became important. Wind-flow slabs that create a wind path inside the tunnel to induce ventilation must be light in weight and have good strength and fire resistance. Insert a lightweight body by hollowing it into the slab, and mixing steel fibers, expose the concrete to high temperatures when it is lightweight, observe the explosion, and compare the stress changes before and after exposure to high temperatures.