http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전력용 강재의 정적ㆍ동적 크리프의 상관성과 예측 및 AE평가(1) ; 정적 크리프와 AE평가
오세규(Sae-Kyoo Oh),장홍근(Hong-Keun Chang),송정근(Jeong-Keun Song) 한국해양공학회 1998 韓國海洋工學會誌 Vol.12 No.1
In this 1st report, the relationship between pure creep properties and initial strain was studied and also its acoustic emission test was performed during creep test at 500, 600 and 700℃. And the applicability of the acoustic emission technique was investigated to analyze the quantitive relationship between all the pure properties(creep strength, creep rupture time or creep life, steady state creep rate, total creep rate, creep strain, total creep strain, etc.) and the initial strains as well as to analyze AE properties during the pure creep loading condition.
유공압 밸브 스풀용 강재의 관 대 봉 이종재 마찰용접의 최적화와 용접강도특성 및 AE평가
오세규(Sea-Kyoo Oh),김현필(Hyun-Pil Kim),장홍근(Hong-Keun Chang),오명석(Myeong-Suk Oh) 한국해양공학회 1997 韓國海洋工學會誌 Vol.11 No.1
The hydraulic or pneumatic valve spools became essential as the important components on the production of automatic hydraulic or pneumatic machinaries as mechanical industry has been rapidly developed. The machining precision is in necessity for manufacturing the valve spools. They could be unstable in the quality by the conventional arc welding. And also they have a lot of technical problems in manufacturing because their shapes are generally small. By the precision casting process such as lost wax process, the production cost may be increased. But by the friction welding technique, they will be able to be manufactured without such problems.<br/> This paper deals with the development of dissimilar friction welding optimization for the hydraulic or pneumatic valve spool by friction welding and a new approach of study on real-time quality evaluation by AE techniques.
國際規格案 DIS9712「非破壞檢査技術者의 技量認定및 인증」
張洪根 한국비파괴검사학회 1992 한국비파괴검사학회지 Vol.12 No.3
國際標準化機構(ISO)의 非破壞檢査 技術者의 技量認定및 인증에 關한 國際規格案 DIS9712를 번역, 紹介한다. 이 文書는 現在로는 案에 불과하지만 不遠間 會員國 各國이 投票에 依해서 決定되게될 것이다. 毆州의 大部分 國家는 積極的으로 贊成을 하고 있고 開發途上國에서는 同調를 하고 있으며 日本도 贊成을 표명하고 있다. 反對하는 나라는 놀랍게도 美國과 西獨이지만 對立點이 몇가지로 좁혀지고 있고 妥協策이 모색되고 있어서 國際規格으로써 確定되는 것은 時間問題인 것으로 보이며 正式 文書化 하기까지는 아마도 時間이 좀 걸릴 듯하다. 많은 나라가 이 文書를 前提로 해서 非破壞檢査 技術資格에 對한 認定의 國際統合을 推進하고 있다. 日本도 1989年에 從來使用해오던 規程을 改訂하였으며 國際統合을 더욱 進展시키기 爲하여 自國의 認定規程과 國際規格案과의 項目別로 比較檢討하고 있다. 우리나라의 技術資格認定制度는 國家技術資格法에 依據하여 韓國産業人力官理公團에서 主管하여 實施하고 있는 反面 美國, 毆州 等 大多數의 나라가 政府의 委任下에 協會 等의 團體에서 主管하여 實施하고 있는것이 特徵이며 技術資格의 等給面에서도 대부분의 國家가 Level 1, 2 및 Level 3의 3等級으로 區分하여 實施되고 있는데 現行 우리나라는 技能師, 機能長(機能大卒業者 대상), 技師 1, 2급 및 技術士로 細分되어 實施되고 있다. 國際標準化 機構(ISO)의 非破壞檢査 技術者의 技量認定및 인증에 對한 國際規格이 마무리 단계에 있고 많은 나라에서 國際統合을 推進하고 있는 추세여서 우리나라도 이에 대응해 나아가야 할 것으로 思料된다.
주파수분석법에 의한 발전소 고온배관재료의 크리프손상 평가
이상국,이인철,장홍근 한국비파괴검사학회 2000 한국비파괴검사학회지 Vol.20 No.1
화력발전소 보일러의 주증기관, 헤더, 스팀드럼 등과 같은 주요 고온배관설비에서 발생하는 크리프 손상을 측정하는 비파괴적 측정방법에는 레프리카, 전기저항법 및 경도법 등이 적용되고 있으나, 이들 방법들은 측정절차 및 준비가 복잡할 뿐만 아니라 접근이 가능한 설비표면에만 적용되는 제한점을 가지고 있다. 따라서 본 논문은 이들 종래의 방법을 신뢰성 있고 정량적인 초음파 비파괴평가법으로 보완 및 적용을 위하여, 실제 고온배관의 운전조건을 모의하여 수행한 크리프 인공열화실험 및 이들 크리프손상재에 대한 초음파실험을 통한 주파수분석 연구로서, 크리프손상 상태별 초음파 신호 분류를 위해 초음파신호의 각종 주파수특성을 평가하였다. In boiler high-temperature pipelines such as main steam pipe, header and steam drum in fossil power plants, conventional measurement techniques(replica method, electric resistance method, and hardness test method) for measuring creep damage have such disadvantages as complex preparation and measurement procedures, too many control parameters. And also, these techniques have low practicality and applied only to component surfaces with good accessibility. It needs to apply a reliable and quantitative ultrasonic nondestructive evaluation method that can be replaced for these equipment. In this study, both artificial creep degradation test using life prediction formula and frequency analysis by ultrasonic tests for crept specimens were carried out for the purpose of nondestructive evaluation for creep damage. As a result of ultrasonic tests for crept specimens, we conformed that the high frequency side spectra decrease and central frequency components shift to low frequency band, and also their bandwidth decreases as increasing creep damage in backwall echos.
주광태,신진성,김동언,송정호,주승환,장홍근 한국비파괴검사학회 2002 한국비파괴검사학회지 Vol.22 No.5
국내 감마선투과검사용 조사장치는 1,000여대로 2,500여명의 종사자가 대부분 수동으로 원격 조작하는 실정으로 작업의 효율화와 방사선피폭 저감화를 위하여 자동 원격조작기의 사용이 요구된다. 이에 연구팀은 실무에 적합한 토크와 안전계수로부터 54kgf·㎝의 출력을 지닌 24V, 200W의 BLDC모터를 이용하여 0.4∼1.2 m/s 범위의 선원 이동속도를 조절할 수 있는 구동장치와 RF 센서로 구동 속도 조절, 광전센서에 의한 선원 위치 및 timer로 노출시간을 제어할 수 있는 무선 원격조작기를 개발하였다. 이와 같이 개발한 자동원격조작기는 AC와 DC 겸용, 그리고 기존의 수동 원격조작기에 탈착이 가능하여 자동과 수동을 겸용할 수 있는 경제적 이점 등으로 활용도가 클 것으로 기대된다. Recently, gamma radiographic equipments have been used about 1,000 sets manually and operated by about 2,500 persons in Korea. In order for a radiography to work effectively with avoiding any hazard of the high level radiation from the source, many field workers have expected developing a wireless automatic remote exposure controller. The KITCO research team has developed an automatic remote exposure controller that can regulate the speed of 0.4∼1.2 m/s by BLDC motor of 24V 200W which has output of 54 kgf·㎝, suitable torque and safety factor for the work. And the developed automatic remote exposure controller can control rpm of motor, pigtail position by photo-sensor and exposure time by timer to RF sensor. Thus, the developed equipment is expected that the unit can be used in many practical applications with benefits in economical advantage to combine the use of both automatic and manual type because attachment is possible existent manual remote exposure controller, AC and DC combined use.