http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
동일면상에 heater 와 감지전극을 형성한 마이크로가스센서의 제작 및 특성
임준우(Jun Woo Lim),이상문(Sang Mun Lee),강봉휘(Bong Hwi Kang),정완영(Wan Young Chung),이덕동(Duk Dong Lee) 한국센서학회 1999 센서학회지 Vol.8 No.2
A micro-gas sensor with heater and sensing electrode on the same plane was fabricated on phosphosilicate glass(PSG, 800nm)/Si₃N₄ (150nm) dielectric membrane. PSG film was provided by atmospheric pressure chemical vapor deposition(APCVD), and Si₃N₄ film by low pressure chemical vapor deposition(LPCVD). Total area of the fabricated device was 3.78 X 3.78mm2. The area of diaphragm was 1.5 x 1.5㎟, and that of the sensing layer was 0.24 x 0.24㎟. Finite-element simulation was employed to estimate temperature distribution for a square-shaped diaphragm. The power consumption of Pt heater was about 85mW at 350℃. Tin thin films were deposited on the silicon substrate by thermal evaporation at room temperature and 232 ℃, and tin oxide films(SnO₂) were prepared by thermal oxidation of the metallic tin films at 650℃ for 3 hours in oxygen ambient. The film analyses were carried out by SEM and XRD techniques. Effects of humidity and ambient temperature on the resistance of the sensing layer were found to be negligible. The fabricated micro-gas sensor exhibited high sensitivity to butane gas.
고온 양성자 교환막 연료전지용 열가소성 탄소 복합재료 분리판 개발
임준우 ( Jun Woo Lim ),김민국 ( Minkook Kim ),이대길 ( Dai Gil Lee ) 한국복합재료학회 2016 Composites research Vol.29 No.5
열경화성 탄소 섬유 복합재료 분리판은 높은 기계적 특성뿐만 아니라 높은 내산성을 갖으나, 높은 제조단가 및 낮은 자체저항이 극복해야 할 가장 큰 장애물이다. 따라서 본 연구에서는, 열가소성 폴리머를 복합재료분리판의 기지로 적용하여 분리판 생산성과 자체저항이 모두 증가된 열가소성 탄소 복합재료 분리판을 개발하였다. 전기 전도도 및 기계 강도를 증가시기키 위하여 평직 형태의 탄소 섬유 직물을 사용하였으며, 분리판의 자체 저항을 감소시키기 위하여 전도성 나노입자를 열가소성 기지에 혼합하였다. 개발된 분리판의 면적 비저항 및 기계물성을 고온 연료전지 작동 온도 및 스택의 체결압에 따라 측정하였다. Although thermoset carbon fiber composite bipolar plates not only have high mechanical properties but also high corrosion resistance in acid environment, high manufacturing cost and low bulk electrical conductivity are the biggest obstacle to overcome. In this research, thermoplastic polymer is employed for the matrix of carbon composite bipolar plate to increase both the manufacturing productivity and bulk electric conductivity of the bipolar plate. In order to increase the electrical conductivity and strength, plain type carbon fabric rather than chopped or unidirectional fibers is used. Also nano particles are embedded in the thermoplastic matrix to increase the bulk resistance of the bipolar plate. The area specific resistance and the mechanical strength of the developed bipolar plate are measured with respect to the environmental temperature and stack compaction pressure.
PEM 연료전지용 가스확산층-탄소 복합재료 분리판 조합체 개발
임준우 ( Jun Woo Lim ) 한국복합재료학회 2021 Composites research Vol.34 No.6
PEM(양성자 교환막) 연료 전지는 부산물로 물 만을 생성하여 친환경 에너지원으로 각광받고 있다. 이러한 연료전지의 스택을 이루는 여러 부품들 중 연료전지의 효율을 결정짓는 분리판에 관한 연구가 활발히 진행되고 있다. 복합재료 분리판은 높은 강도와 강성 및 내식성을 갖지만 상대적으로 낮은 전기 전도도를 갖는 단점이 있다. 본 연구에서는 이러한 단점을 극복하고자 가스확산층(GDL)-복합재료 분리판 조합체를 개발하고 그 성능을 실험적으로 확인하였다. 선행 연구에서 개발된 흑연 포일 코팅법을 분리판과 GDL 간의 접촉 저항을 줄이기 위해 적용하였다. 또한, 스택 내의 전자 이동경로를 향상시키고 GDL과 분리판 사이의 접촉저항을 최소화하기 위하여 금속 박막을 이용하여 GDL-분리판 조합체를 제작하였다. 실험 결과 개발된 GDL-분리판 조합체는 기존의 복합재료 분리판과 비교하여 98% 낮은 전기저항을 갖는 것을 확인하였다. PEM (proton exchange membrane) fuel cells generate only water as a by-product, and thus are in the spotlight as an eco-friendly energy source. Among the various components composing the stack of the fuel cell, research on the bipolar plate that determines the efficiency of the fuel cell is being actively conducted. The composite bipolar plate has high strength, rigidity and corrosion resistance, but has the disadvantage of having a relatively low electrical conductivity. In this study, to overcome these shortcomings, a gas diffusion layer (GDL)-composite bipolar plate assembly was developed and its performance was experimentally verified. The graphite foil coating method developed in the previous study was applied to reduce the contact resistance between the bipolar plate and the GDL. In addition, in order to improve electron path in the stack and minimize the contact resistance between the GDL and the bipolar plate, a GDL-bipolar plate assembly was fabricated using a thin metal foil. As a result of the experiment, it was confirmed that the developed GDL-bipolar plate assembly had 98% lower electrical resistance compared to the conventional composite bipolar plate.
장애인거주시설 생활재활교사의 직무스트레스에 관한 일(一) 연구 : 개인요인, 조직요인, 업무요인, 관계요인을 중심으로1)
임준우 ( Lim Jun-woo ) 극동대학교 사회복지연구소 2023 글로벌사회복지연구 Vol.13 No.1
본 연구는 장애인거주시설 생활재활교사들의 직무스트레스에 영향을 미치는 요인을 확인하여 그들의 직무스트레스를 완화하는 데 목적이 있다. 이는 거주시설 장애인들에게 양질의 서비스를 제공하기 위한 기본 토대를 개선할 수 있다는 점에서 의의가 있을 것이다. 조사 대상자는 장애인거주시설 생활재활교사이고, 충북·강원·경기지역의 14개 장애인거주시설의 생활재활교사 104명을 대상으로 하였다. 자료 분석은 SPSS 25.0 프로그램을 이용하여 기술통계, 빈도분석, 상관분석, 다중회귀분석을 실시하였다. 분석 결과는 다음과 같다. 우선 장애인거주시설 생활재활교사의 직무스트레스에 가장 큰 영향을 미치는 요인은 업무요인(행정업무여건)으로 나타났다. 그리고 조직요인(보수만족, 교대근무만족)과 개인요인(사회복지전공여부, 사회복지자격증여부) 순으로 영향을 미치는 것으로 나타났다. 반면, 관계요인(관리감독, 대인관계, 클라이언트)은 직무스트레스에 큰 영향을 미치지 않는 것으로 나타났다. 본 연구는 이런 연구결과를 바탕으로 생활재활교사의 과중한 업무 부담을 경감시킬 수 있는 방안을 제언하였다. The purpose of this study is to identify the factors that affect job stress of living rehabilitation teachers in residential facilities for the disabled and to alleviate their job stress. This will be meaningful in that it could improve the basic foundation for providing quality services to the disabled in residential facilities. The subjects of the survey were living rehabilitation teachers in residential facilities for the disabled, and 104 living rehabilitation teachers at 14 residential facilities for the disabled in Chungbuk, Gangwon, and Gyeonggi Provinces were targeted. For data analysis, descriptive statistics, frequency analysis, correlation analysis, and multiple regression analysis were performed using the SPSS 25.0 program. The analysis results are as follows. First of all, the factor that has the greatest influence on the job stress of living rehabilitation teachers in residential facilities for the disabled was the work factor (administrative work conditions). In addition, organizational factors (remuneration satisfaction, shift work satisfaction) and individual factors (social welfare major, social welfare qualification status) were found to have an effect in order. On the other hand, it was found that the related factors (management supervision, interpersonal relationship, client) did not have a significant effect on job stress. Based on the results of this study, this study proposed a plan to reduce the heavy work burden of living rehabilitation teachers.