http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이효남,지영훈,지광수,이동한,Lee Hyo Nam,Ji Young Hoon,Ji Kwang Soo,Lee Dong Han 대한방사선치료학회 1997 大韓放射線治療技術學會誌 Vol.9 No.1
I. Objective and Importance of the Project We have been using MC-50 cyclotron and NT-50 neutron therapy machine for treating cancer patients since 1986 at Korea Cancer Center Hospital. It is mandatory to measure accurately the dose distribution and the total absorbed dose of fast neutron for putting it to the clinical use. At present the methods of measurement of fast neutron are proposed largely by American Associations of Physicists in Medicine (Task Group 18), European Clinical Neutron Dosimetry Group, and International Commission on Radiation Units and Measurements. The complexity of measurement, however, induce the methodological differences between them. In our study, therefore, we tried to establish a unique technique of measurement by means of measuring the emitted doses and the dose distribution of fast neutron beam from neutron therapy machine, and to invent a standard method of measurement adequate to our situation. II. Scope and Contents of the Project For establishing a unique technique of measurement and inventing a standard method of measurement of fast neutron beam, 1. to grasp the physical characteristics of neutron therapy machine 2. to study the principles for measrement of fast neutron beam 3. to get the dose distribution (dose rate, percent-depth dose, flatness etc) throught the actual measurement 4. to compare our data with those being cited world-widely.
이효남(Hyo-Nam Lee),오석진(Seok-Jin Oh),오종윤(Jong-Yun Oh) 한국추진공학회 2013 한국추진공학회 학술대회논문집 Vol.2013 No.5
로켓모타의 최대예상작동압력은 전체 비행체의 작동 신뢰성과 효율을 좌우한다. 그 이유는 주요 구조 부품들의 설계압력에 영향을 미치기 때문이다. 이런 중요성에도 불구하고, 이를 어떻게 설정해야 하는지에 대한 지침이 없다. 본 연구에서는 로켓모타의 최대예상작동압력을 확률적으로 결정하는 방법을 제시하였다. 이 방법은 로켓모타의 최대작동압력에 대한 확률밀도를 몬테칼로 방법으로 구하고, 이를 바탕으로 통계적 허용한계를 적용해서 최대예상작동압력을 설정한다. 설계변수들의 확률정보에 근거한 이 방법은 설계자에게 설정값에 대한 정량적 설명을 가능케 한다. Maximum expected operating pressure(MEOP) of a rocket motor is very important for safety and efficiency of a flight system because it governs the design pressure for structural components, such as motor case, blast tube, sealing parts, and mechanical fastened joints. Despite the importance, there is no guideline how to determine MEOP. We propose the probabilistic method to determine MEOP in rocket motor design. This method is such that first the probability density of chamber pressure was obtained using Monte Carlo(MC) method, and then the MEOP was determined by employing the upper one-sided statistical tolerance limit. This method, based on probabilistic information of design variables, enables the designer to quantitatively interpret the value of MEOP.
유비쿼터스 환경에서의 상황 인지적 우선순위 기반의 실시간 스케줄링 기법
이효남(Hyo-Nam Lee),임성화(Sung-Hwa Lim),김재훈(Jai-Hoon Kim) 한국정보과학회 2008 한국정보과학회 학술발표논문집 Vol.35 No.1
유비쿼터스 지능 공간 환경에서 중요한 이슈는 사용자에게 현재 상황에 최적의 서비스를 제공하는 것이며, 이를 위해서 상황 인식(Context Aware) 기법에 대한 연구가 널리 진행되고 있다. 유비쿼터스 지능 공간은 분산 배치된 수많은 애플리케이션 및 장치와 같은 스마트 객체들이 존재하여 사용자에게 최적의 서비스를 제공하는 환경이다. 유비쿼터스 지능 공간에서는 각 스마트 객체가 수집하는 데이터는 무수히 많다. 사용자에게 최적의 서비스를 제공하기 위해선 데이터들을 빠르게 처리하여 서비스를 제공하여야 한다. 현재 연구된 스케줄링 방법은 데이터 처리에만 중점을 두었기 때문에 스스로 상황을 인지하여 예측하여야 하는 유비쿼터스 지능 공간을 위한 미들웨어에는 적합하지 않다. 본 논문은 수집한 데이터를 바탕으로 상황을 인식하고 태스크의 우선순위를 재조정하는 상황 인지형 실시간 스케줄링 기법을 제안한다. 제안하는 상황 인지형 실시간 스케줄링 기법인 U-RM, U-EDF와 기존의 RM, EDF 알고리즘을 비교하여 성능평가를 한 결과 U-RM은 기존의 RM보다 최대 20.7%의 성능 향상을 보였으며, U-EDF의 경우 기존의 EDF보다 최대 26.8%의 성능 향상을 보였다.
유비쿼터스 환경에서의 JMX를 이용한 모니터링 구조 설계
이효남(Hyo-Nam Lee),이병훈(Byoung-Hoon Lee),김재훈(Jai-Hoon Kim),조위덕(We-Duke Cho) 한국정보과학회 2007 한국정보과학회 학술발표논문집 Vol.34 No.1D
유비쿼터스 환경에서 중요한 이슈는 사용자에게 현재 상황에 적절한 서비스를 실시간으로 제공하는 것이며, 이를 위해서 상황 인식(Context Aware) 기법에 대한 연구가 널리 진행되고 있다. 사용자에게 편리한 환경을 제공하기 위해서는 상황 인식 환경이 구축되어야 한다. 상황 인식 환경이 구축이 되면 센서가 환경을 감지하여 사용자에게 맞는 특정한 애플리케이션을 실행하거나, 시스템을 재구성 하는 서비스를 제공할 수 있다. 자동적으로 상황을 인식하여 서비스를 제공하기 위해서 애플리케이션의 모니터링이 매우 중요하다. 애플리케이션의 기능, 성능, 상태를 모니터링 함으로써 서비스의 질을 높일 수 있고 사용자에게 최적의 서비스를 제공할 수 있기 때문이다. 본 논문에서는 시스템의 CPU, Memory 사용량 등의 측정에 이용이 되었던 JMX(Java Management Extension)를 이용하여 유비쿼터스 환경의 상황 인식 애플리케이션에 적합한 모니터링 기법을 설계하고 적용방안을 제시하였다.
이효남(Hyo-nam Lee),장승교(Seung-gyo Jang),오종윤(Jong-yun Oh) 한국항공우주학회 2013 韓國航空宇宙學會誌 Vol.41 No.8
핀풀러의 신뢰도를 몬테카를로 시뮬레이션을 통해서 예측하였다. 예측방법은 응력-강도 간섭 모델에 근거한다. 이 모델은 강도가 응력보다 작을 경우를 고장으로 간주한다. 본 연구에서 강도는 핀을 예정된 거리까지 후퇴시키는데 필요한 에너지로, 응력은 이 핀의 운동을 방해하는데 소요되는 에너지로 간주하였다. 전자는 주로 화약량에 의해 결정되고 후자는 여러 가지 마찰력과 반발방지장치에서 소모되는 에너지에 의존한다. 응력과 강도 변수들은 해석적 성능 모델로부터 계산하였다. 본 연구에서 제시된 방법은 많은 시료가 필요하지 않기 때문에 유사한 종류의 파이로 장치 신뢰도 계산에도 적용될 수 있다. Reliability of a pin puller was predicted by Monte Carlo simulation. The prediction method is based on the stress-strength interference model that failure occurs if the stress exceeds the strength. In this study, the strength is considered as the energy delivered by combustion of pyrotechnics to retreat the pin to a predetermined position, whereas the stress is regarded as the energy required to resist the pin movement. The former mainly depends on the amount of pyrotechnic charge and the latter is governed by several friction forces and the energy dissipation within locking mechanism. Both the variables of stress and strength were computed using an analytical performance model. The method presented here, not depending upon a large number of test item, can be applicable to predict the reliability of other kinds of pyrotechnic devices.