http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
연구논문 : 빗물펌프장에 설치된 인공습지의 비점오염원 저감효율 연구
천석영 ( Suk Young Chun ),김지태 ( Ji Tae Kim ),이일국 ( Il Kook Lee ),장순웅 ( Soon Woong Chang ) 한국환경영향평가학회 2014 환경영향평가 Vol.23 No.1
The aim of this study was evaluated the effects of total rainfall, rainfall intensity and antecedent dry days and identify the correlation analysis with the EMC removal efficiency, in order to provide an understanding of the operation and maintenance factors of constructed wetland in flood pumping station. This study was conducted total of 20 monitoring in a catchment (326.2 ha) of constructed wetland in Ga-un flood pumping station located at the downstream of the Wang-suk stream. The determined EMC removal efficiencies were 36.04±9.45% for BOD, 38.50±13.50% for CODMn, 34.34±13.05% for TN and 34.22±14.27% for TP, respectively. These results showed that the pollutants concentration and EMC were reduced while passing through the constructed wetland. In the correlation analysis, the highly correlations with EMC removal efficiency of BOD and CODMn were observed for total rainfall and rainfall intensity (P<0.05). However, the correlations were not found with TN and TP for rainfall variables.
학술 7 특별구두세션 : F4. 학술세션 QM 적용: 현장 ; 증기발생기 F-Model TSP 7단 검사
김만수 ( Man Soo Kim ),주철형 ( Cheol Hyoung Joo ),최웅 ( Woong Choi ),김오성 ( Oh Sung Kim ),유태문 ( Tae Moon Yoo ),이일국 ( Il Kook Lee ),김홍화 ( Hong Hwa Kim ),양선현 ( Seon Hyun Yang ) 한국품질경영학회 2014 한국품질경영학회 학술대회 Vol.2014 No.2
1. 목적 · 원자력 발전소의 증기발생기 7단 튜브 지지판 상부에 대한 원격육안검사 업무를 효율적이고 체계적으로 수행하기 위해 필요한 제반 절차를 제공하여 증기발생기 7단 튜브 지지판 상부의 슬리지 축적상태와 이물질 유무를 검사 확인하여 증기발생기의 건전성과 안전성을 확보함에 있다. 2. 연구설계/ 방법론/ 접근방법 · 고리 3,4호기 증기발생기(F-Model) 2차측의 7단 튜브 지지판(TSP, Tube Support Plate) 상부를 원격육안검사 장비를 이용하여 검사를 실시하였다. 7단 튜브 지지판(TSP, Tube Support Plate) 상부인 Quatrefoil과 AVB(Anti-Vibrator Bar)의 슬러지 축적상태를 확인하기 위해 증기발생기 1차 습분분리기 상단에서 1차 습분분기기의 안내깃(Swairl Vane)을 통하여 Video ln1age Scope를 집어넣어 U-Band 까지 접근시켜 상태를 확인하였다. 이 작업을 16개의 안내깃(Swairl Vane)에 동일하게 반복하여 증기발생기 7단 튜브 지지판 상부 구간을 모두 검사하였다. 3. 연구결과 · 고리3,4호기의경우 7단 튜브 지지판 (TSP, Tube Support Plate) 상부인 Quatrefoil과 AVB(Anti-Vibrator Bar) 의 슬리지 축적상태는 양호하였다. 또한, 일회성이 아닌 주기적인 수행이 요구된다. 4. 실무적 시사점 · 증기발생기에 국한된 것이 아닌 일반 산업현장에서의 구조물 검사 등 건전성 확보가 요구되는 산업현장에서 응용 가능. 5. 독창성/ 가치 · 증기 발생기 전열관의 표면상태와 슬리지 축적상태를 육안으로 확인할 수 있어 건전성 및 안전성 확보에 큰 기여를 한다.
이진경,박영철,이규창,최일국,이준현 한국비파괴검사학회 2001 한국비파괴검사학회지 Vol.21 No.6
형상기억복합재료는 복합재료내에 압축잔류응력을 발생시킴으로써 재료의 인장강도를 증가시키는데 사용되어지고 있다. 본 연구에서는 형상기억복합재료를 제조하기 위하여 TiNi 강화재와 A16061 기지재를 사요하였으며 핫프레스 방법에 의해 TiNi/A16061 형상기억복합재료를 제조하였다. 그러나 핫 프레스 방법에 의해 제조된 형상기억복합재료는 하중을 받을시 강화재와 기지재 사이에 계면손상현상이 발생하였으며 이를 위하여 냉간압연을 실시하였다. 냉간압연을 받은 시험편은 냉간압연을 받지 않은 시험편에 비하여 인장강도가 현저히 증가하였다. 또한 본 연구에서는 고온에서 형상기억복합재료의 미시적 손상을 평가하기 위하여 음향방출기법을 이용하였다. Shape memory alloy has been used to improve the tensile strength of composite by the occurrence of compressive residual stress in matrix using its shape memory effect. In order to fabricate shape memory alloy composite, TiNi alloy and Al6061 were used as reinforcing material and matrix, respectively. In this study, TiNi/Al6061 shape memory alloy composite was made by using hot press method. However, the specimen fabricated by this method had the bonding problem at the boundary between TiNi fiber and Al matrix when the load was applied to it. A cold rolling was imposed to the specimen to improve the bonding effect. It was found that tensile strength of specimen subjected to cold rolling was more increased than that of specimen which did not underwent cold rolling. In addition, acoustic emission technique was used to quantify the microscopic damage behavior of cold rolled TiNi/Al6061 shape memory alloy composite at high temperature.