http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이동욱 ( Dong Uk Yi ),김동원 ( Dong Won Kim ),백재호 ( Jae Ho Baek ),곽삼탁 ( Sam Tak Kwak ),문명준 ( Myung Jun Moon ) 한국화상학회 2013 한국화상학회지 Vol.19 No.3
Sol-gel 코팅제는 금속 소재의 부식 억제를 위해 다양한 분야에서 활용되어지고 있다. 본 연구의 유/무기 하이브리드 코팅제는 methyl trimethoxy silane 과 alumina sol에 3-glycidyloxypropyl trimethoxy silane을 혼합하여 제조하였다. 3-glycidyloxypropyl trimethoxy silane 의 함량에 따라 sol-gel 공정으로 도장된 박막의 내식성, 경도, 그리고 열안정성을 조사하였다. Electrochemical impedance와 potentiodynamic polarization의 측정 결과로부터 도막의 내식성이 3-glycidyloxypropyl trimethoxy silane의 도막 내 장거리 상호작용에서 기인한 접착력 증가와 crack-free 도막의 형성에 의해 개선되었음을 알 수 있었다. Sol-gel coating has been widely utilized for enhancing the corrosion resistance of metal substrate. The organic-inorganic hybrid coatings were prepared by mixing the methyl trimethoxy silane and alumina sol with 3-glycidyloxypropyl trimethoxy silane. The corrosion resistance, hardness, and thermal stability of thin film coated by sol-gel method was investigated according to the adding amounts of 3-glycidyloxypropyl trimethoxy silane. From electrochemical impedance and potentiodynamic polarization measurement, it was found that the corrosion resistance of coating was improved by the adhesion increase and the crack-free film that induced by the long-range interaction of 3-glycidyloxypropyl trimethoxy silane within coating.
EA성숙도가 정보화관리 성과에 미치는 영향에 관한 연구
이동욱(Dong-Wook Yi),전성현(Sung-Hyun Juhn),박찬욱(Chan-Uk Park) 한국IT서비스학회 2012 한국IT서비스학회지 Vol.11 No.1
This study was carried out to figure out the relationship between EAmaturity, information management capacity, and information performance, and find the effect between these variables and the reciprocal causation. The study found that EAmaturity has a positive effect on information resource management and performance. In other words, the effect of input, calculation, management and utilization factors on information planning in EAmaturity showed that calculation, management and utilization factors have a significant effect on the information planning. While the effect of input, calculation, management and utilization factors on information introduction and management showed that only both calculation and utilization have a significant effect on the information management factor. It says that EAinput in EAmaturity does not play a big part in the planning stage, as well as not go through a series of process that is connected to the maturity stage by immediate field application. Consequently, EAmaturity varies from the level that EAcreates introduction and performance according to organization. This suggests that the maturity and performance can be also changed by the level that EAcreates information performance by accepting and using this capability within organization as well as the capability to introduce and fully perform the EAsystem presented in enterprise architecture framework of public sector.
PTFE 도막의 표면물성에 대한 다중벽 탄소나노튜브의 효과
이현우 ( Hyeon Woo Lee ),이동욱 ( Dong Uk Yi ),김동원 ( Dong Won Kim ),김명환 ( Myung Hwan Kim ),손민영 ( Min Young Shon ),문명준 ( Myung Jun Moon ),곽삼탁 ( Sam Tak Kwak ) 한국화상학회 2014 한국화상학회지 Vol.20 No.4
다중벽 탄소나노튜브(MWCNT)는 전기적, 기계적 성질이 매우 우수한 소재이나, MWCNT를 복합체로 응용하는 과정에서 MWCNT의 분산이 어려워 복합체의 제조에 제한을 받고 있다. 본 연구에서는 MWCNT의 표면을 산화시켜 -OH기를 표면에 도입하고, 표면에 음전하를 증가시켜 불소 고분자(PTFE) 도막에서 MWCNT의 분산을 증대시켰다. 그리고, MWCNT의 효과적인 분산으로 PTFE 복합체 도막의 경도와 소수성이 증가되고, 전기 정도성을 부여하여 표면의 기능성이 증대됨을 보여주었다. Multi-wall carbon nanotubes(MWCNT) exhibit extraordinary mechanical and electronic properties. However, the preparation and processing of MWCNT cpmposites has been limited by their dispersity. The presence of hydroxy groups formed by the surface oxidation of MWCNT increases the dispersion of MWCNT in polytetrafluoroethylene(PTFE) resin according to the increase of negative surface 1charges. It was shown that PTFE composites including MWCNT improved the hardness and the hydrophobicity of PTFE coating and given the electrical conductivity on coating film.
에폭시와 아크릴 전착도료의 혼용성에 따른 물성 변화 연구
정성수(Sung Soo Jung),이동욱(Dong Uk Yi),김동원(Dong Won Kim),김명환(Myung Hwan Kim),곽삼탁(Sam Tag Kwag),문명준(Myung Jun Moon) 한국표면공학회 2014 한국표면공학회지 Vol.47 No.3
The important drawback of epoxy electrodeposition(ED) coatings is the lack of the weathering resistance caused by the structure of bisphenol A. To improve this yellowing phenomena, acryl ED coatings have been developed. Compared with the epoxy ED coatings, however, acryl ED coatings are relatively weak in the corrosion resistance and mechanical properties. The purpose of this study is complemented their drawbacks by mixing epoxy and acryl ED paints. The salt spray, accelerated weathering test(QUV) and cupping, bending, impact test were employed to investigate the corrosion resistance, weathering resistance, and mechanical properties of ED coatings. When the ratio of acryl to epoxy resin of ED coating is 0.33, the weathering resistances are appropriately improved in condition maintaining the corrosion resistance. It was shown that the weathering resistance for epoxy ED coating was adjusted by optimally mixing acryl ED paint.
서경준 ( Seo Gyung-joon ),기상서 ( Ki Sang-seo ),이기철 ( Lee Ki-cheol ),이동욱 ( Yi Dong-uk ),장병익 ( Jang Byeng-ik ) 한국구조물진단유지관리공학회 2022 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.26 No.2
3D 스캐너는 임의의 물체에 대하여 일정간격으로 레이저를 주사하여 외형을 3차원 좌표의 집합(Point Cloud)으로 나타냄으로써 물체의 3차원적인 형상과 치수를 측정할 수 있는 장비로서 변위, 침하, 손상 등에 대한 이력관리 및 원거리 측정이 가능하기 때문에 접근이 불가능한 시설물에 대해서도 적용이 가능한 효과적인 장비이다. 따라서, 본 논문에서 상수도시설물 정밀안전진단 시 접근이 불가능한 손상부의 측정 및 진행성 여부와 침하 등의 변위에 대한 장기적인 이력관리가 필요한 시설물에 3D 스캐너를 활용한 사례를 소개하고자 한다.
서경준 ( Seo Gyung-joon ),기상서 ( Ki Sang-seo ),이기철 ( Lee Ki-cheol ),이동욱 ( Yi Dong-uk ),장병익 ( Jang Byeng-ik ) 한국구조물진단유지관리공학회 2022 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.26 No.2
3D 스캐너는 임의의 물체에 대하여 일정간격으로 레이저를 주사하여 외형을 3차원 좌표의 집합(Point Cloud)으로 나타냄으로써 물체의 3차원적인 형상과 치수를 측정할 수 있는 장비로서 변위, 침하, 손상 등에 대한 이력관리 및 원거리 측정이 가능하기 때문에 접근이 불가능한 시설물에 대해서도 적용이 가능한 효과적인 장비이다. 따라서, 본 논문에서 상수도시설물 정밀안전진단 시 접근이 불가능한 손상부의 측정 및 진행성 여부와 침하 등의 변위에 대한 장기적인 이력관리가 필요한 시설물에 3D 스캐너를 활용한 사례를 소개하고자 한다.
서경준 ( Seo Gyung-joon ),기상서 ( Ki Sang-seo ),이기철 ( Lee Ki-cheol ),이동욱 ( Yi Dong-uk ),장병익 ( Jang Byeng-ik ) 한국구조물진단유지관리공학회 2022 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.26 No.2
3D 스캐너는 임의의 물체에 대하여 일정간격으로 레이저를 주사하여 외형을 3차원 좌표의 집합(Point Cloud)으로 나타냄으로써 물체의 3차원적인 형상과 치수를 측정할 수 있는 장비로서 변위, 침하, 손상 등에 대한 이력관리 및 원거리 측정이 가능하기 때문에 접근이 불가능한 시설물에 대해서도 적용이 가능한 효과적인 장비이다. 따라서, 본 논문에서 상수도시설물 정밀안전진단 시 접근이 불가능한 손상부의 측정 및 진행성 여부와 침하 등의 변위에 대한 장기적인 이력관리가 필요한 시설물에 3D 스캐너를 활용한 사례를 소개하고자 한다.
서경준 ( Seo Gyung-joon ),기상서 ( Ki Sang-seo ),이기철 ( Lee Ki-cheol ),이동욱 ( Yi Dong-uk ),장병익 ( Jang Byeng-ik ) 한국구조물진단유지관리공학회 2022 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.26 No.2
3D 스캐너는 임의의 물체에 대하여 일정간격으로 레이저를 주사하여 외형을 3차원 좌표의 집합(Point Cloud)으로 나타냄으로써 물체의 3차원적인 형상과 치수를 측정할 수 있는 장비로서 변위, 침하, 손상 등에 대한 이력관리 및 원거리 측정이 가능하기 때문에 접근이 불가능한 시설물에 대해서도 적용이 가능한 효과적인 장비이다. 따라서, 본 논문에서 상수도시설물 정밀안전진단 시 접근이 불가능한 손상부의 측정 및 진행성 여부와 침하 등의 변위에 대한 장기적인 이력관리가 필요한 시설물에 3D 스캐너를 활용한 사례를 소개하고자 한다.
서경준 ( Seo Gyung-joon ),기상서 ( Ki Sang-seo ),이기철 ( Lee Ki-cheol ),이동욱 ( Yi Dong-uk ),장병익 ( Jang Byeng-ik ) 한국구조물진단유지관리공학회 2022 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.26 No.2
3D 스캐너는 임의의 물체에 대하여 일정간격으로 레이저를 주사하여 외형을 3차원 좌표의 집합(Point Cloud)으로 나타냄으로써 물체의 3차원적인 형상과 치수를 측정할 수 있는 장비로서 변위, 침하, 손상 등에 대한 이력관리 및 원거리 측정이 가능하기 때문에 접근이 불가능한 시설물에 대해서도 적용이 가능한 효과적인 장비이다. 따라서, 본 논문에서 상수도시설물 정밀안전진단 시 접근이 불가능한 손상부의 측정 및 진행성 여부와 침하 등의 변위에 대한 장기적인 이력관리가 필요한 시설물에 3D 스캐너를 활용한 사례를 소개하고자 한다.