http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
윤남일,안성수 (사)디지털산업정보학회 2012 디지털산업정보학회논문지 Vol.8 No.4
This paper implements an effective attendance management and monitoring system utilizing the RFID(Radio Frequency IDentification) and Smart phone for student. In this paper, RFID system use 13.56MHz to control the attendance, and we can show that information of RFID and dynamic image through IP camera in Smart phone. We also make up the contents and database utilizing the labview program in computer. Especially, proposed technique can obtain dynamic image by server implementation at real time basis so that it is possible to use simultaneously several Smart phone. From the various and practical experiment, it is confirm that proposed system is useful for attendance management and remotely monitoring.
유전체 덮개층을 갖는 비대칭 결합선로를 이용한 90$^{\circ}$ 위상천이기의 광대역 특성
윤남일,강창훈,이용국,박한규 한국통신학회 1999 韓國通信學會論文誌 Vol.24 No.6
본 논문에서는 Ku-밴드의 마이크로파 대역에서 위상배열 안테나에 사용 가능한 결합선로를 이용하여 위상천이기에서 기존에 고려하지 않았던 주파수에 따른 분산특성을 전파(Full-wave) 해석방법인 SDA(Spectral Domain Approach)를 사용하여 정확히 해석하였다. 또한 비대칭 결합선로를 사용하는 위상천이와 유전치 덮개층이 부가된 위상천이기의 설계를 제안하였다. 현재 사용되고 있는 대칭 결합선로를 이용한 쉬프만 위상천이기와 비교하여, 이에 대한 위상응답의 특성변화에서 통과대역의 위상편차가 줄고 대역폭이 확대되어 광대역 특성이 개선되는 것을 이론적으로 해석하고 실험을 통하여 검증하였다. In this paper, the characteristics of frequency dependent dispersion are analyzed for the phase shifters in Ku-band phased array antenna system using full-wave method, SDA(Spectral Domain Approach).The design technique of asymmetric coupled-line phase shifter with dielectric overlay is proposed. The compared results of phase responses are shown with conventional symmetric coupled-line Schiffman phase shifter. The experimental results verify the improvement of broadband characteristics by the increasing bandwidths and the decreasing phase deviations.
윤남일,최종갑,변경석,Yoon, Nam-Il,Choi, Jong-Kap,Byun, Kyung-Seok 한국융합신호처리학회 2011 융합신호처리학회 논문지 (JISPS) Vol.12 No.4
다양한 환경에서 작업을 수행하고 있는 아동 로봇이 작업을 수행하며 목표지점으로 정확하게 이동하가 위해서는 정밀한 위치 측정 시스템이 필요하다. 본 논문에서 특정 위치에서 이동로봇의 정밀한 위치 측정을 위한 새로운 고정밀 도킹센서를 제안하였다. 제안된 도킹 센서는 Linear CCD와 2개의 초음파 센서로 구성되어 있다. 도킹 센서는 단순한 마크가 있는 평면과 센서 사이의 횡방향 위치 (x)와 종방향 위치 (y), 각도(${\theta}$)를 측정한다. 2개의 초음파 센서는 각센서의 거리정보를 이용하여 종방향 위치와 각도를 측정하고, Linear CCD는 횡방향 위치틀 측정한다. 전방향 이동로봇에 적용하여 제안된 센서의 성능을 확인하였다. 실험 결과로부터 종횡 lmm 이내, 각도 $0.2^{\circ}$ 이내의 반복정밀도를 갖는 고정밀의 도킹 센서 성능을 확인할 수 있었다. 제안된 도킹 센서는 이동로봇의 정밀한 도킹에 활용될 수 있다. Mobile robots performed various missions in various environments. In order to move to target precisely, the mobile robots need a precise position sensing system In this paper, a new high precision docking sensor is proposed. Proposed docking sensor consists of linear CCD(charge coupled device) sensor and ultrasonic sensors. The docking sensor system can measure lateral position(X), longitudinal position(Y) and angle(${\theta}$) between the sensor and flat target with simple mark. Two ultrasonic sensors measure two distances which can be converted to longitudinal position and angle. Linear CCD sensor measures lateral position using center mark of the target. To verify performance of the sensor, the sensor is applied to an omnidirectional mobile robot. Several experimental results show highly precise performance of the sensor. Repeatability of the docking sensor is less than 1mm and $0.2^{\circ}$. Proposed docking sensor can be applied for precise docking of mobile robot.
다층구조에서 도체 두께를 고려한 비대칭 결합선로의 특성해석
윤남일,홍익표,박한규 한국통신학회 2000 韓國通信學會論文誌 Vol.25 No.3
본 논문에서는 준정적 해석방법을 사용하여 다층 구조에서 유한한 도체 두께를 갖는 비대칭결합 마이크로스트립(ACM: Asymmetric Couple Microstrip) 선로의 특성을 연구하였다. 준정적 해석방법으로서 모드정합법을 이용하였으며, ACM 선로의 특성 임피던스와 유효 유전율 상수가 도체 두께의 함수로 나타나는 결과를 얻었다. 수치해석 결과를 통해서 단층 및 다층구조에서 도체 두께의 변화로 인하여 ACM 선로의 전파특성이 변화되는 것으로 나타났다. In this paper, the characteristics of the asymmetric coupled microstrip(ACM) lines with finite metalization thickness are investigated using the quasi-static analysis in the multilayered structure. By mode-matching method as the quasi-static analysis. the characteristic impedances and effective dielectric constants in ACM lines are obtained as a function of metalization thickness. The numerical results show that the propagation characteristics of ACM lines in the single and multilayered structure will be changed by the variation of metalization thickness.
도체 두께를 가진 결합선로를 이용하여 강한 결합특성을 갖는 1/4파장 역방향 방향성 결합기의 설계
홍익표,윤남일,육종관 한국전자파학회 2003 한국전자파학회논문지 Vol.14 No.10
본 논문에서는 유한한 도체 두께를 갖는 결합선로를 이용하여 1/4파장 역방향 방향성 결합기를 설계하였다. 방향성 결합기를 구성하는 유한 도체 두께를 갖는 결합선로를 해석하기 위한 방법으로 간단하고 빠른 수치해석 방법인 모드정합법을 사용하였다. 본 논문의 해석 결과는 도체 두께를 고려한 역방향 방향성 결합기의 설계가, 도체 두께를 고려하지 않고 설계한 경우 기존에 알려졌던 단점들인 약한 결합특성, 낮은 지향성, 그리고 비현실적인 결합선로의 폭을 극복할 수 있음을 보여준다. 또한, 수치해석 결과로부터 l/4파장 역방향 방향성 결합기에서는 도체 두께의 고려로 강한 결합특성을 만드는 것이 가능하지만, 결합길이가 약간 길어진다는 사실을 확인하였다. 본 논문에서 해석한 유한한 도체 두께는 역방향 방향성 결합기의 새로운 설계 변수로서 사용이 가능하며, 아울러 다양한 마이크로파 집적회로의 설계에도 응용이 가능함을 보여준다. In this paper, the 1/4 wavelength backward-wave directional coupler using coupled lines with finite metallization thickness is described. A mode-matching method, simple and fast approach to the quasi-static analysis, has been used to analyse this structure. The numerical results show that it is possible to overcome the disadvantages of weakly coupling, low directivity, and narrow strip distance non-realizable in the case of 1/4 wavelength backward-wave directional coupler with zero thickness conductor. It is also revealed that thicker metallization causes longer coupler length in the case of backward-wave symmetrical parallel coupled line directional coupler. The finite metallization thickness can be a new parameter for tight coupling in the design of backward-wave directional couplers, which enables us to design more accurate properties of monolithic microwave integrated circuits.