http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유석재,이승환,전민호,이헌상,김우년 한국고분자학회 2013 Macromolecular Research Vol.21 No.11
The effects of compatibilizers on the mechanical, morphological, thermal, and rheological properties of poly(propylene carbonate) (PPC)/poly(methyl methacrylate) (PMMA) (70/30) blends were investigated. Three different compatibilizers were used in this study: poly(styrene-g-acrylonitrile)-maleic anhydride (SAN-g-MAH), poly(ethylene-coglycidyl methacrylate) (EGMA) and maleic anhydride (MAH). Tensile strength of the PPC/PMMA (70/30) blend increased with the addition of SAN-g-MAH up to 5 parts per hundred resin by weight (phr). In the morphological studies of the PPC/PMMA (70/30) blend with the SAN-g-MAH 5 phr, the droplet size of the PMMA decreased most significantly (from 3.4 to 0.9 μm) compared to those of the blends with the EGMA and MAH. Glass transition temperature (Tg) of the PPC-rich phase in the PPC/PMMA (70/30) blends shifted to the higher temperature when the SAN-g-MAH was added up to 5 phr. Thermal stability of the blends was improved by the addition of SAN-g-MAH (5 phr). Complex viscosity of the PPC/PMMA (70/30) blends were increased when the SAN-g-MAH was added up to 5 phr. From the above results in mechanical, morphological, thermal and rheological studies of the PPC/PMMA (70/30) blends, it is suggested that the most effective compatibilizer is the SAN-g-MAH and its optimum content in the blend is 5 phr in this study.
하이퍼써멀 에너지 영역에서 높은 플럭스 입자빔 생성을 위한 플라즈마 발생원
유석재,김성봉,Yoo, S.J.,Kim, S.B. 한국진공학회 2009 Applied Science and Convergence Technology Vol.18 No.3
하이퍼써멀 영역의 에너지 ($1{\sim}100\;eV$), 특히, 50 eV 이하의 에너지를 갖는 높은($10^{16}$ particles/$cm^2\;s$ 이상) 플럭스의 이온빔을 직접 인출하기는 어렵지만, 이온을 중성화한 중성입자빔 경우에는 가능하다. 높은 플럭스의 하이퍼써멀 중성입자빔을 생성하고 효율적으로 수송하기 위해서는 낮은 플라즈마 운전압력(0.3 mTorr 이하)에서도 높은 이온밀도($10^{11}\;cm^{-3}$ 이상)를 유지할 수 있는 대면적 플라즈마 발생원이 요구된다. 이러한 하이퍼써멀 중성입자빔의 생성을 위해 요구되는 플라즈마 발생원을 구현하기 위해서는 자기장에 의한 전자가둠 방식이 도입되어야 하는데, 영구자석을 이용한 다양한 자기장 구조를 갖는 Electron Cyclotron Resonance (ECR) 플라즈마 발생 방식이 하나의 해결 방법이 될 수 있음을 제안하였다. 여기에는 마그네트론 구조를 갖는 자기장을 채택한 평면형 ECR 플라즈마 발생 방식과 원통형 플라즈마 용기 외벽 둘레에 영구자석 어레이를 설치하여 축방향 자기장을 형성하고 용기 중심부에 전자를 가두는 원통형 방식이 있다. 두 경우 모두 기본적으로 mirror field 구조에 의한 전자 가둠을 기반으로 하고 전자의 drift에 의해 더욱 효율적으로 전자를 플라즈마 공간에 가두는 방식을 도입하고 있어서 낮은 운전압력에서도 높은 밀도의 플라즈마를 발생시키고 유지할 수 있다. Since it is difficult to extract a high flux ion beam directly at an energy of hyperthermal range ($1{\sim}100\;eV$), especially, lower than 50 eV, the ions should be neutralized into neutral particles and extracted as a neutral beam. A plasma source required to generate and efficiently transport high flux hyperthermal neutral beams should be easily scaled up and produce a high ion density (${\ge}10^{11}\;cm^{-3}$) even at a low working pressure (${\le}$ 0.3 mTorr). It is suggested that the required plasma source can be realized by Electron Cyclotron Resonance (ECR) plasmas with diverse magnetic field configurations of permanent magnets such as a planar ECR plasma source with magnetron field configuration and cylindrical one with axial magnetic fields produced by permanent magnet arrays around chamber wall. In both case of the ECR sources, the electron confinement is based on the simple mirror field structure and efficiently enhanced by electron drifts for producing the high density plasma even at the low pressure.
한인토론토교회의 성장 방향연구 : 토론토의 성장하는 교회를 통하여 본
유석재 선문대학교 신학대학 2001 선문대학교 신학대학논문집 Vol.2001 No.-
교회성장의 개념과, 역사와 성서에 나타나있는 교회 성장의 신학적 근거를 제시함으로써, 먼저, 개념 정립에 중점을 두고자 한다. 그리고 참부모님 말씀 속에서의 교회의 성장과 그것을 이루기에 필수조건인 전도와 교회성장의 요건, 그리고 목회자의 조건 등을 알아보겠다. 그리고 토론토의 성장하는 교회인 큰빛교회와 영락교회의 전반적인 프로그램과 성장원인을 열거하고, 성장원인을 분석해 보겠다. 그리고 토론토 한인교회의 현황을 기술하고, 교회성장의 방향성을 제시함으로써, 토론토 한인교회와 전 세계의 통일교회의 성장을 모색해 보려고 한다.
Energy Distribution of Neutrals from a Hyperthermal Neutral Beam (HNB) Source
유석재,노태협,Mingab Bok,김대철,정미,조무현,남궁원 한국물리학회 2008 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.53 No.6
The energy distribution of the hyperthermal neutral beam (HNB) produced by impingement of plasma ions onto a metal surface was measured. A HNB source has been developed with a hot-filament discharge. The plasma was confined near the metal surface by using the magnetic field of a magnetron configuration. The produced HNB can be ionized in the plasma by electron impact ionization and charge exchange processes. The energy of the ionized HNB reflects the energy of the HNB. The energy distribution of the ionized HNB passing through the plasma can be detected by using an ion energy analyzer (IEA) that consists of two parallel plates to deflect ions. The peak value and the width of the HNB energy distribution were affected by the bias voltage of the metal surface and the gas pressure. This paper presents the experimental details for HNB generation and the characteristics of the HNB.