http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Paraffin-Wax-TiO₂와 Paraffin-Wax-SiO₂混合物質의 誘電常數에 關한 硏究
安俊燮,鄭千基,南信祐,申榮男 동국대학교 대학원 1979 大學院硏究論集-東國大學校 大學院 Vol.9 No.-
Moldable mixtures of paraffin wax and TiO2 powder(rutile) or SiO_2 powder are easily prepared and are shown to have dielectric constants continuously variable between 2.25 and 15 for concentration of TiO_2 up to 75% by volume, and between 2.25 and 1.05 for concentration of SiO_2 up to 30% by volume. Comparison with theory suggests that the depolarizing factor for TiO_2 mixture is 0.2. These composite materials are very useful for tailoring of dielectric constants in this range, particularly in applications requiring dielectric-filled parts.
안준섭,최상기 농업협동조합중앙회 2000 농협조사월보 Vol.515 No.-
대만은 1980년대 말부터 GATT 가입을 추진해 왔고, 최근에는 WTO 가입을 위해 주요 관련당사국들과 개별 협상을 모두 마치는 등 만반의 준비를 다하고 있다. 이러한 과정에서 대만은 WTO 체제하에서도 식량안보를 확보하고 농가 소득을 보장해 줄 수 있는 다양한 농업정책들을 수립 실천해 오고 있다. 쌀은 대만 농업 중에서도 가장 중요한 품목으로 농정의 주 관심사로 되어 왔다. 1970년 후반부터 1 인 당 미곡소비량이 급속히 감소하는 등 쌀 수요량의 감소에 의해 국내 미곡생산이 과영 국면으로 접어들면서 논의 전작(轉作)정책을 적극적으로 추진해 왔고, 특히 1997년부터 는 쌀에 대한 직접지불제를 도입, 시행하게 되었다. 대만은 쌀 생산을 조정하기 위해 직접지불제를 도입하면서도 수매정책을 그대로 유지함으로써 농가 소득을 확고히 보장하고 있다. 또한, 휴경 등을 실시하는 논에 대해서도 2기 작 연속 휴경 금지, 경운·정지, 녹비작물 재배 등 논의 형상 보존과 지력 강화를 도모하는 내용의 직접지불제를 실시함으로써 유사시에는 다시 주곡 생산이 가능하도록 했다. 이 같은 대만의 쌀 농업과 직접지불제는 우리에게 다음과 같은 시사점을 주고 있다. 첫째, 직접지불제를 실시하면서도 여전히 쌀 수매정책을 유지하고 있어 우리 나라의 논농업직불제 도입에 참고할 사항이다. 둘째, 대만의 직접지불제는 생산조정과 함께 식량안보의 확보를 통시에 추구하고 있다. 셋째, 대만은 수입농산물로 인한 피해를 구제해 주기 위한 피해구조기금제도를 운용하여 농업경쟁력을 높이는 정책과 함께 농가소득을 안정화시키는 정책을 도입하고 있다는 점이다.
안준섭,高正大,金振璜,徐永勇 동국대학교 대학원 1981 大學院硏究論集-東國大學校 大學院 Vol.11 No.-
Cu_(2-χ)Se-n·Si solar cell were prepared by vacuum evaporation, and we investigated their electrical properties. Its open circuit voltage (V_(oc)) and short circuit current density (I_(sc)) were 0.25 V and 14.3 mA, respectively. The barrier height calculated by the currentvoltage characteristics was 1.01 eV. The maximum conversion efficiency obtained from the current-voltage characteristic under sunlight is 1.8% for Cu_(2-χ)Se-n·Si solar cell.
안준섭,송재관,한은미 한국재료학회 2022 한국재료학회지 Vol.32 No.2
We fabricated 3 types of ETL, mp TiO2, ZnO, and ZnO coated on mp TiO2(ZMT) to compare the photoelectric conversion efficiency (PCE) and fill factor (FF) of Perovskite solar cells. The structure of the cells was FTO/ETL/Perovskite (CH3NH3PbI3)/spiro-MeOTAD/Ag. SEM morphology assessment of the ETLs showed that mp TiO2 was porous, ZnO was flat, and the ZMT porous surface was filled with a thin layer. Via XRD measurements, the crystal structures of mp TiO2 and ZnO ETL were found to be anatase and wurtzite, respectively. The XPS patterns showing energy bonding of mp TiO2, ZnO, and ZMT O 1s confirmed these materials to be metal oxides such as ETL. The electrical characteristics of the Perovskite solar cells were measured using a solar simulator. Perovskite solar cells with ZMT ETL showed showed PCE of 10.29 % than that of conventional mp TiO2 ETL devices. This was considered a result of preventing Perovskite from seeping into the ETL and preventing recombination of electrons and holes.
안준섭,한은미 한국고분자학회 2021 한국고분자학회 학술대회 연구논문 초록집 Vol.46 No.1
A TiO2 nanorod electron transfer layer (ETL) was coated using a hydrothermal synthesis method. For coating conditions, FTO was dipped in 0.1 M titanium isopropoxide solution and hydrothermally synthesized at 300 °C for 30 minutes. The morphology, crystal structure, and chemical bonding of the TiO2 nanorod ETL was confirmed using SEM, XRD, and XPS, respectively. The structure of the device is FTO/nanorod TiO2 ETL/Perovskite (CH3NH3PbI3) photo active layer/ spiro-MeOTAD hole transfer layer/Ag electrode. The electrical property of the Perovskite solar cell was measured with a solar simulator, resulting in the photoelectric conversion efficiency of about 7.8%.