http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
곽재원,안경수,경민수,김형수,Kwak. Jae-Won,Ahn. Kyoung-Soo,Kyoung. Min-Soo,Kim. Hung-Soo 한국방재학회 2008 한국방재학회 학술발표대회논문집 Vol.2008 No.1
본 연구는 도심지 유역인 경기도 부천 여월동 단지 내의 도시하천에 대해서 유출 및 홍수 특성을 분석하였다. 해당 유역의 하천은 평상시에는 매우 적은 유량만이 흐르고 있으나, 홍수 시에는 상대적으로 높은 홍수위 및 유속으로 인해 홍수 피해의 위험성을 안고 있다. 홍수에 대한 안전성을 확인하기 위하여 유출 해석 모형을 적용하고, 또한 해당 유역에 대해 구축된 GIS 자료 및 하천 단면과 HEC-RAS를 이용, 홍수위를 예측하여 치수 안정성을 검증하고, 홍수시의 유속을 산정하여 하천 시설물과 자연형 호안 공법에 대한 홍수 방어 능력을 검토 하였다. 검토 결과 다목적 소하천을 목적으로 설치된 하천 구조물로 인하여 홍수 피해 발생위험이 있었으며, 홍수시에도 높은 유속으로 인한 불안요소를 포함하고 있었다. 이러한 주거지역내 소규모의 도시 하천에 대한 홍수 유출 해석에서는 홍수 유출 외에도 구조물에 의한 배수위 변동과 홍수시 유속으로 인한 영향과 같은 여러 위험 요인에 대하여 함께 고려해야 할 것으로 판단된다. In this study we analyzed flood runoff and flood characteristics of an small urban river basin which is in an apartment complex in Yewol-Dong, Buchun-Si, Gyunggi-Do. A little discharge normally flows in the river, however this small river has a relatively high potential of flood damage risk in the flood season due to the high flood level and velocity. Therefore we used the GIS data, cross section data in the river, HEC-RAS model, etc. for investigating safety of a river against flood runoff and also we investigated the stability of hydraulic structures and ability of flood prevention in the river. As the result of investigation, we found that the river had the risk of flood damage occurrence due to the hydraulic structures constructed for various purposes in the river. So we should analyze backwater effect by the structures and consider the risk factors can be occurred by the flood runoff and velocity for more safe design of a small river basin in the residential area such as an apartment complex in the urban area.
신상성(Sang-sung Shin),이태일(Tae-il Lee),안경수(Kyoung-soo Ahn) 대한조선학회 2011 대한조선학회 학술대회자료집 Vol.2011 No.11
This paper presents the CFD analysis process of maneuvering performance for hull form design using commercial software. Structural grid was generated according to the standardized process and the CFD results were validated using the ITTC quality manual. The standard wall function recommended by the commercial software was used and the boundary setting method for drift and turning was developed and applied for CFD solution. Grid type tests show that the different grid system can give us different results and the grid type selection is also important for the consistent results. Through the comparison with PMM tests of KVLCC 1 and KVLCC 2, usefulness of the process of CFD calculation is confirmed.