http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
손명숙,조안나 학습자중심교과교육학회 2023 학습자중심교과교육연구 Vol.23 No.5
목적 본 연구는 만 2세 영아를 대상으로 참여관찰을 통해 그림책 연계 점토놀이로 나타나는 정서지능의 반응에 대해 분석하는 것이목적이다. 방법 이를 위하여 경기도 I시에 소재한 A 영유아보육기관 만 2세반을 대상으로 정서지능의 반응을 크게 세 가지인 정서인식 및 표현, 정서의 사고촉진, 정서조절의 범주와 7개의 하위영역으로 직접관찰을 통해 분석하고 재해석을 통해 유목화하여 연구결과를 도출하는 방법을 사용하였다. 결과 그림책 연계 점토놀이를 통해 발현되는 영아의 정서지능 반응은 다음과 같다. 첫째, 정서인식 및 표현의 반응은 모방하기, 몰입하기, 창의적 표현의 세 가지로 나타났다. 둘째, 정서의 사고촉진 반응은 정서적 상호작용과 상징놀이의 두 가지 구분으로 나타났다. 셋째, 정서조절은 감정전환과 재시도하기의 반응으로 나타났다. 참여관찰을 통해 점토놀이의 다양한 반응을 긍정적인 효과의 모습으로 간파할 수 있는 결과를 보여 정서발달에 점토놀이가 미치는 영향을 알 수 있었다. 결론 만 2세 영아를 대상으로 한 그림책 연계 점토놀이는 정서와 관련된 그림책 읽어주기와 함께 시도되었을 때 더 활발한 활동을보였으며, 그와 관련된 경험을 점토를 통해 자유롭게 표상하는 활동은 영아의 정서지능 반응에 긍정적인 효과의 모습을 보이는 것으로 나타났다.
플라즈마 질화에 의한 STS 304강의 표면물성에 관한 연구
孫明淑,尹在弘,李建煥,邊應善 國立 昌原大學校 産業技術硏究所 1996 産技硏論文集 Vol.10 No.-
The most essential point on the ion nitriding of stainless steel is to eliminate passive film. Therefore, it has been studied that passive film was eliminated by changing pre sputtering parameters. Then pre sputtering parameters were pressure, holding time and gas mixing ratio. The degree of elimination of passive film was characterized by using AES and its crystallographic structure by means of XRD. Mechanical property and microstructure were determined by Vickers hardness test and SEM. The results obtained from the experiment are summarized as follows ; 1. Sputtering pressure and holding time had no relation with the behavior of nitride layer and the most effective parameter was observed as gas mixing ratio. 2. The retained O₂concentration in vacuum atmosphere was decreased by deoxidization of H??ion with gas addition. H??ion prevented the oxidization on the surface of stainless steel and reduced oxygen potential of sputtered oxide from the surface. 3. For pre sputtering, H₂gas was more dominant in the nitriding rate than Ar and N₂gas. 4. Ar/H₂gas mixture which gas mixing ratio was 1/2(vol%) was the most effective in all pre sputtering conditions. It was estimated that this resulted from the combination of the mechanical reaction by bombardment massive Ar??ion and the chemical reaction by deoxidization of H??ion. 5. For ion nitriding of the oxidized stainless steel thickness which diffuse easily nitrogen into stainless steel. In this study, the mechanical reaction by bombardment massive Ar??ion was more effective parameter than chemical reaction by deoxidization of H??ion to eliminate oxide layer which grow up to a critical thickness.
PLASMA 이온 질화처리 한 Ti-6Al-4V의 표면물성에 관한 연구
손명숙,허성강,윤재홍,이영생,박노광 國立 昌原大學校 産業技術硏究所 1997 産技硏論文集 Vol.11 No.-
The purpose of this study is to improve the surface hardness and corrosion resistance of Ti-6Al-4V by ion nitriding treatment. As well known, the ion nitriding is widely used an effective surface hardening method and principal parameters of the ion nitriding are temperature and time. Ti-6Al-4V alloys were ion-nitrided under the atmosphere of the nitrogen-hydrogen mixture gas and surface modified layers were observed. Experimental results represent that the surface modified layers are formed as a multiphases of TiN and Ti₂N. The hardness of the layers are in the range Hv of 1000 to 2000. The multiphase layers also showed excellent corrosion resistance in 2 Mol HCl solution at room temperature, comparing to the non-coated layers. The kinetics show that the growth of the layers by N₂ diffusion were proportional to t½. The kinetics energy for the formation of nitride layers was 174KJ/mol.