http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
경수로 사용후핵연료 건식저장시스템의 격납감시 기술현황 분석
백창열,조천형 한국방사성폐기물학회 2016 방사성폐기물학회지 Vol.14 No.1
국가 주도로 2009년부터 개발중인 경수로 사용후핵연료 건식저장시스템은 금속 겸용용기와 콘크리트 저장용기의 두 가지방식이다. 국외 건식저장시설 운영 시 주요 격납감시 방안으로는 금속 겸용용기인 경우 이중 뚜껑 사이에 압력센서를 설치하여 실시간 압력변화를 감시하는 방법이 있고 콘크리트 저장용기의 경우는 캐니스터 기반으로 주요 격납 경계인 뚜껑을이중으로 용접하는 방식으로 구조물(over pack 또는 module)의 공기 유로인 입구 및 출구에 대한 온도 변화를 감시하는 방법으로 격납을 관리하는 것으로 나타났다. 미국, 독일 등 30 년 이상 안정적으로 저장시설을 관리한 국가의 다양한 적용기술 및 운영사례를 조사/분석하여 우리가 개발중인 저장시스템에 적용할 수 있는 격납감시 방안을 도출하는데 활용할 수 있도록 하였다. Leading national R&D project to design a PWR spent nuclear fuel interim dry storage system that has been under development since mid-2009, which consists of a dual purpose metal cask and concrete storage cask. To ensure the safe operation of dry storage systems in foreign countries, major confinement monitoring techniques currently consist of pressure and temperature measurement. In the case of a dual purpose metal cask, a pressure sensor is installed in the interspace of bolted double lid(primary and secondary lid) in order to measure pressure. A concrete storage cask is a canister based system made of double/redundant welded lid to ensure confinement integrity. For this reason, confinement monitoring method is real time temperature measurement by thermocouple placed in the air flow(air intake and exit) of the concrete structure(over pack and module). The use of various monitoring technologies and operating experiences for the interim dry storage system over the last decades in foreign countries were analyzed. On the basis of the analysis above, development of the confinement monitoring technology that can be used optimally in our system will be available in the near future.
백창열,조천형 한국방사성폐기물학회 2016 방사성폐기물학회지 Vol.14 No.4
This paper describes the development of a dry operation process for PWR spent nuclear fuel, which is currently stored in the domestic NPP's storage pool, using a dual purpose metal cask. Domestic NNPs have had experience with wet type transportation of PWR spent nuclear fuel between neighboring NPPs since the early 1990s, but no experience with dry type operation. For this reason, we developed a specific operation process and also confirmed the safety of the major cask components and its spent nuclear fuel during the dual purpose metal cask operation process. We also describe the short term operation process that was established to be completed within 21 hours and propose the allowable working time for each step (15 hours for wet process, 3 hours for drain process and 3 hours for vacuum drying process). 본 논문은 국내 원전의 습식저장조에 저장 중인 경수로형 사용후핵연료를 금속겸용용기를 이용해 건식으로 운영하기 위한운영공정을 개발하는 것이다. 국내 경수로형 원전의 사용후핵연료는 1990년대 초부터 습식으로 소내에서 운반을 한 경험은 많으나 건식으로 운전한 경험은 전혀 없는 실정이다. 이에 따라 금속겸용용기를 운영할 수 있는 세부 운영공정을 개발하였으며 주요 운영공정에서 금속겸용용기의 주요 구성품 및 사용후핵연료의 안전성이 유지됨을 확인하였다. 단기운영공정은 총 21시간 내에 이루어지도록 절차를 수립하였고 단계별로 허용운전 시간(15시간 습식공정, 3시간 배수공정, 그리고 3시간 진공공정)도 제시하였다.
백창열,조천형 한국방사성폐기물학회 2018 방사성폐기물학회지 Vol.16 No.2
During the seven years from 2009 to 2016, PWR SNF (spent nuclear fuel) transportation and storage systems suitable for domestic conditions were developed by the government to cope with the saturation of wet storage capacity in NPPs. One of the developed systems is a multipurpose metal cask applicable for transportation/storage; the other is a concrete cask dedicated to storage. Efficient cask technologies were secured utilizing the characteristics and experience of relevant industrial, academic and research institutes. Technological independence was also achieved through several patent registrations of research outcomes. To prepare for a rapid increase of demand in the near future, technology transfer of secured patents and technologies to the domestic industry was carried out twice in the years of 2016 and 2017. 국내 경수로형 원전의 사용후핵연료 소내 습식저장 용량의 포화에 대비하기 위해 정부 주도로 2009년부터 2016년까지 7년에 걸쳐 국내 여건에 적합한 수송/저장시스템을 개발하였다. 시스템은 운반과 저장을 겸할 수 있는 금속겸용용기와 저장전용인 콘크리트 저장용기로 효율적인 기술개발을 위해 관련 산학연의 특성과 경험을 적극 활용하여 국내고유 모델을 개발하였고 특허 등록을 추진하여 기술의 독립성도 확보하였다. 현재까지 확보한 다수의 특허 및 기술을 산업계에 개방하여 국내수요에 대처하고자 2016년과 2017년 두 차례에 걸쳐 기술이전도 추진하였다.