http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
백상훈(Sang Hoon Baek) 장로회신학대학교 세계선교연구원 2017 선교와 신학 Vol.41 No.-
팀 무니는 성서 말씀을 재료로 삼는 고전적인 기도법인 ‘렉시오 디비나’(lectio divina)에 견주어 ‘비지오 디비나’(visio divina)라는 용어를 사용했는데 이는 시각 예술의 경향이 강화된 현대 문화 안에서 미술 작품이 갖는 영성학적 의의를 시사한다. 예술 작품은 프랭크 브라운이 간파한 대로, 인간의 마음을 탐구하고 사회적 실존의 실상을 계시함으로써 보는 이로 하여금 신적인 은총의 감각과 기쁨을 선사한다. 이 글은 예술작품 특히 그림이 기도와 묵상의 재료가 되며 하나님 체험의 단초가 마련될 수 있음을 논증한다. 787년 콘스탄티노플 공의회에서 성상은 성육신 신학에 기초하는바 기록된 복음과 동일한 가치를 지니며 말씀과 상호계시적인 관계에 놓인다고 공표하였다. 종교개혁시대에 칼빈과 달리 루터는 그림의 활용이 우상숭배가 될 수 없으며 따라서 예배 혹은 건축물에 활용하여 영성 형성의 수단으로 삼아야 함을 주장하였고, 가톨릭 개혁가 로욜라의 이냐시오는 영성 형성의 매뉴얼인 <영신수련>에서 상상력의 활용을 통한 회화적인 묵상을 제시하기도 하였다. 그림 묵상의 영성적 체험의 가능성에 대한 영성신학적 관점을 제시하기 위하여 개신교 신학자 폴 틸리히와 영성 작가 헨리 나우웬의 이론을 검토한다. 이들의 그림 묵상 체험에 따르면 그림은 보는 이로 하여금 그림 너머의 신적인 실재 혹은 아름다움 자체로 인도해주는 상징적 매개로서 독특한 봄의 방식, 곧 관상적인 봄을 요청한다. 이와 같은 효과는 예수와 삭개오의 만남을 형상화한 지거 쾨더의 작품 <전환점>에 대한 성찰적 묵상을 통하여 확증될 수 있다. 결론적으로 보자면, 그림 묵상은 기도에 대한 영성학적 이해를 확대시키고, 예술 작품을 통한 영성 형성의 가능성을 촉진하며, 일상생활 속 영적실천의 실마리를 제공할 수 있다. Tim Mooney’s suggestion of the term, visio divina, corresponding to lectio divina as the traditional method of prayer with the Bible passage, indicates the significance of art-works within the contemporary culture, in which the impact of visual arts increases. In searching the human mind and revealing the reality of social existence, as Frank Brown argues, art-works enable viewers to savor the sense of divine grace and joy. This essay aims at arguing that art-works, specifically paintings, can be a catalytic material for prayer and meditation that leads to the divine contemplation of the experience of God. In 787, the ecumenical council announced that since icons were based on the theology of incarnation, they would inevitably carry the same value as the gospel and enjoy co-revelational relationship with the Word. In Reformation era, Martin Luther, unlike John Calvin, advocated the use of paintings and actually used them in worship and in architectures as the means of spiritual formation. Also, Ignatius of Lolyola suggested the use of active, pictorial imagination in meditating the Bible passages in The Spiritiual Exercises. In the experiences of the two spiritual writers in the twentieth century, Paul Tillich and Henry Nouwen, the meditation of paintings enabled the viewers to go beyond the paintings themselves to touch the divine reality or the beauty. What was required in this process was the contemplative attitude. This effect can be reinstated in a reflective seeing over Sieger Koder’s painting, Turning Point. Having thus far seen, we conclude that painting-meditation enhances the scope and significance of prayer, facilitates the process of spiritual formation via the media of art-works, and provides a clue for the every-day spiritual praxis.
스퍼터링 증착변수에 따른 n-i-p 플렉서블 실리콘 박막 태양전지용 ZnO/Ag 후면전극의 물성 변화
백상훈(Baek, Sang-Hun),김경민(Kim, Kyung-Min),이정철(Lee, Jeong-Chul),박상현(Park, Sang-Hyun),송진수(Song, Jin-Soo),윤경훈(Yoon, Kyung-Hoon),왕진석(Wang, Jin-Suk),조준식(Cho, Jun-Sik) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.11
마그네트론 스퍼터링법을 이용하여 n-i-p 구조의 플렉서블 실리콘 박막태양전지용 ZnO/Ag 후면전극을 stainless steel 기판위에 제조하고 증착온도와 Ag 박막의 두께 변화에 따른 광학적 특성변화를 조사하였다. ZnO/Ag 구조의 후면전극은 RF와 DC 마그네트론 스퍼터링으로 Ag 금속 및 ZnO:Al(Al₂O₃ 2.5%) 세라믹 타겟을 이용하여 각각 제조하였으며 증착온도는 상온 {sim}500?C로, Ag 박막두께는 100 ~ 500 nm로 변화시켰다. 증착조건 변화에 따라 제조된 후면전극의 표면거칠기 및 형상변화를 Atomic Force Mircroscope (AFM)와 Scanning electron miroscopy (SEM)으로 분석하였으며 이에 따른 반사도 변화를 UV-visible-nIR spectrometry 측정을 통하여 조사하였다. 증착온도가 증가함에 따라 Ag 박막의 표면 거칠기는 점차로 증가하였으며 증착된 후면전극의 반사도도 함께 증가함을 알 수 있었다. Ag 박막의 두께 변화에 따른 반사도 변화와 n-i-p 구조의 플렉서블 실리콘 박막태양전지에 미치는 영향을 조사하였다.
습식 및 온수 바닥 복사 난방 시스템에서 PCM 적용을 위한 상변화온도 영향 분석
백상훈(Sang-Hoon Baek),윤석구(Suk-Goo Yoon),박진철(Jin Chul Park) 한국생활환경학회 2018 한국생활환경학회지 Vol.25 No.1
This study aims to design the PCM radiant floor heating system and to calculate optimal temperature of the PCM. The results of this study is as following. A existing radiant floor heating system have some problems to use a lot of hot water and energy owing to low heat storage performance of autoclaved lightweight concrete and mortar. for this problem, this study suggested the design of PCM radiant floor heating system applied to PCM, which is a heat storage material. The PCM radiant floor system consists of 210 mm concrete slab, 20 mm cushioning material, 15 mm mortar, 10 mm PCM aluminum case, 55 mm mortar, and a finishing material. It was analyzed that the PCM temperature (Melting point) scope for the PCM radiant floor heating system is 32-39℃ through the heat transfer model if a finishing material of 5 mm thickness is used.
플렉서블 실리콘 박막 태양전지용 Ag/ZnO 후면반사막의 광산란 특성 향상
백상훈(Baek, Sanghun),이정철(Lee, Jeong Chul),박상현(Park, Sang Hyun),송진수(Song, Jinsoo),윤경훈(Yoon, Kyung Hoon),왕진석(Wang, Jin-Suk),조준식(Cho, Jun-Sik) 한국신재생에너지학회 2010 한국신재생에너지학회 학술대회논문집 Vol.2010 No.06
유연금속기판위에 DC 마그네트론 스퍼터링을 이용하여 Ag/ZnO 이중구조의 후면반사막을 증착하고 Ag 표면조도 변화에 따른 후면반사막의 반사특성 변화와 플렉서블 비정질 실리콘 박막 태양전지의 셀 특성에 미치는 영향을 조사하였다. Substrate구조를 갖는 플렉서블 실리콘 박막 태양전지에서는 실리콘 박막 광흡수층의 상대적으로 낮은 광 흡수율로 인하여 입사광에 대한 태양전지 내에서의 광 산란 및 포획이 태양전지 효율을 증대시키는데 매우 중요한 역할을 하는 것으로 알려져 있다. 플렉서블 실리콘 박막 태양전지에서의 후면반사막은 광 흡수층에서 흡수되지 않는 입사광을 다시 반사시켜 광 흡수를 증대시키며 이때 후면반사막 표면에서 반사 빛을 효율적으로 산란시켜 이동경로를 증대시킴으로써 광 흡수율을 더욱 향상시킬 수 있다. 본 연구에서는 유연금속 기판위에 Ag와 ZnO:Al(Al₂O₃ 2.5wt%) 타겟을 사용한 DC 마그네트론 스퍼터링법으로 Ag/AZO 이중구조의 후면반사막을 제조하고, Ag 박막의 표면형상 변화와 이에 따른 후면반사막의 반사도 변화를 비교, 분석하였다. 증착 조건 변화에 따른 표면 형상 및 반사 특성은 Atomic Force Mircroscope(AFM), Scanning electron miroscopy(SEM), UV-visible-nIR spectrometry를 통하여 분석하였다. 서로 다른 표면 거칠기를 갖는 후면반사막 위에 n-i-p구조의 a-Si:H 실리콘 박막 태양전지를 제조한 후 태양전지 동작 특성에 미치는 영향을 조사하였다. n,p층은 13.56MHz PECVD, i층은 60MHz VHF CVD를 사용하여 각각 제조 하였으며, Photo I-V, External Quantum Efficiency(EQE) 분석을 통하여 태양전지 특성을 조사 하였다. SEM 분석결과 공정 온도가 증가 할수록 Ag 박막의 표면 결정립 크기도 증가하였으며, AFM분석을 통한 Root-mean-square(Rms)값은 상온에서 500?C로 증착온도가 증가함에 따라 6.62nm에서 46.64nm까지 증가하였다. Ag 박막의 표면 거칠기 증가에 따라 후면반 사막의 확산 반사도도 함께 증가하였다. 공정온도 500?C에서 증착된 후면반사막을 사용하여 a-Si:H 태양전지를 제조하였을 때 상온에서 제조한 후면반사막에 비하여 단락전류밀도 (Jsc)값은 9.94mA/cm²에서 13.36mA/cm²로 증가하였으며, 7.6%의 가장 높은 태양전지 효율을 나타내었다.
모의실험 기반의 해양무기체계 전투실험 프로세스 표준화 방안연구
백상훈,허정행,이동훈,최봉완,Baek, Sang-Hoon,Hur, Jung-Haeng,Lee, Dong-Hoon,Choi, Bong-Wan 한국군사과학기술학회 2012 한국군사과학기술학회지 Vol.15 No.5
Modeling & simulation-based battle experiments(BEx) is being used extensively as an efficient, scientific and rational verification methodology for maritime weapon system acquisition. However, research of definition and concept of BEx and standardized rules and process for the BEx are insufficient in recent military field of BEx. In this study, we discussed the definition and process of BEx based on the role of MND(including JCS), Navy and ADD and proposed the standardized process of BEx for maritime weapon system. Secondly suggested a evaluation methods of modeling and simulation-based BEx with MOP, MOF, MOE in linkage of engineering, engagement, mission and constructive model. Finally presented validate result that applied to the Torpedo using standardized process based on our proposed methodology.