http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
2차측 결합 인덕터를 이용한 ZVZCS Three Level DC/DC 컨버터에 관한 연구
배진용 동국대학교 대학원 2002 大學院硏究論集-東國大學校 大學院 Vol.32 No.-
A ZVZCS(Zero Voltage and Zero Current Switching) Three Level DC/DC Converter is presented to secondary auxiliary circuit. The new converter presented in this paper used a phase shift control with a flying capacitor in the primary side to achieve ZVS for the outer switch. A secondary auxiliary circuit, which consists of one small capacitor two small diodes and one coupled inductor, is added in the secondary to provide ZVZCS conditions to primary switches, ZVS for outer switches and ZCS for inner switches. Many advantages include simple circuit topology high efficiency, and low cost make the new converter attractive for high power applications. The principle of operation, feature and design considerations are illustrated and verified through the experiment with a 1kW 5OkHz IGBT based experimental circuit.
Three-Level 컨버터와 Full-Bridge 컨버터의 손실분석을 위한 모델링 및 특성비교에 관한 연구
배진용,김용,이은영,최근수,계상범,이택기,Bae, Jin-Yong,Kim, Yong,Lee, Eun-Young,Choi, Geun-Soo,Gye, Sang-Bum,Lee, Taek-Ki 한국조명전기설비학회 2004 조명·전기설비학회논문지 Vol.18 No.2
본 논문에서는 Three-Level 컨버터와 Full-Bridge 컨버터의 손실 및 특성비교에 관하여 논하였다. 기존의 연구로부터 Three-Level 컨버터는 Full-Bridge 컨버터에 비하여 스위치 전압 스트레스가 저감되어 고전압 시스템의 경우 좀더 적합하다는 결론이 있었습니다. 그러나 Three-Level 컨버터와 Full-Bridge 컨버터의 손실분석 비교에 관한 구체적인 연구가 미비하고 동시에 소프트 스위칭 범위와 효율 특성에 관한 분석이 부족한 실정이다. 따라서 본 연구에서는 2.5[㎾]급 시작품을 대상으로 고전압ㆍ대용량 응용 분야에 적합한 Three-Level 컨버터와 Full-Bridge 컨버터의 효율 감소에 대한 주요 원인을 비교ㆍ분석하고, 각 소자 및 부품의 손실을 수학적으로 모델링하여 시뮬레이션 한 결과를 바탕으로 각각의 컨버터의 대하여 출력에 따른 각 소자 및 부품의 손실과 특성비교를 하였다. This paper presents the loss and characteristic comparison with Three-Level Converter and Full-Bridge Converter. In previous paper, Three-Level Converter was more suitable than Full-Bridge Converter for high voltage application because switch voltage stress was decreased. The comparative study of loss analyses, soft-switching range and efficiency-characteristic of Three-Level Converter and full-Bridge Converter are rare. This paper shows the main reason of efficiency-diminution compares Three-Level Converter with and Full-Bridge Converter. Also, the loss analysis of each component and the various losses in the circuit are assessed in this paper. The result of the analysis is verified with 2.5[㎾] prototype.
자세음양 균형검사로서 Fukuda Stepping Test에 대한 문헌적 고찰
배진용,이재민,이경란,이영준,인창식,Bae, Jin Yong,Lee, Jaemin,Lee, Gyeong Ran,Lee, Young Jun,Yin, Chang Shik 턱관절균형의학회 2014 턱관절균형의학회지 Vol.4 No.1
Objectives: Neurological examination on balance function is widely applied in clinical practice. Balance function may be clinically relevant to an assessment of yinyang balance in such therapies as temporomandibular joint balancing medicine. Fukuda stepping test is a relatively not-well-known method of balance function test. This study reviewed the procedures and criteria of Fukuda stepping test. Method: Recent articles on Fukuda stepping test were searched in public database (Pubmed, Proquest) and reviewed for its procedures and clinical implications. Results: Fukuda stepping test adopts 50 steps or 100 steps with subsequent assessment of the deviation or displacement of the subject. It may not be reliable during acute phase. Conclusion: Fukuda stepping test may be utilized and be further developed to assess balance function in the neurological management of functions.
동기정류기를 이용한 Two Transistor Forward 컨버터의 효율 개선에 관한 연구
배진용,김용,이은영,최근수,계상범,이택기,Bae, Jin-Yong,Kim, Yong,Lee, Eun-Young,Choi, Geun-Soo,Gye, Sang-Bum,Lee, Taek-Ki 한국조명전기설비학회 2004 조명·전기설비학회논문지 Vol.18 No.2
본 논문에서는 저전압ㆍ대전류 시스템에 적합한 동기정류기를 이용한 TTFC(Two Transistor Forward Converter)를 제안한다. 입ㆍ출력 전압 차가 큰 강압형 컨버터의 경우, 1차측 회로의 전압 스트레스가 크며, 2차측회로의 전류 스트레스가 증가하므로 전체 시스템 효율이 급격히 저하된다. 본 연구에서는 이러한 문제점의 해결책으로 1차측 회로에 Two Transistor 회로를 적용하며, 2차측 회로에 동기정류 방식을 이용하는 TTFC를 제안하였다. 또한 제안된 컨버터의 동작원리, 해석 및 특성에 대해서 논하였으며, MOSFET를 사용하여 입력 DC 400[V], 출력 DC 5[V]/40[A], 200[W]급 시작품을 제작, 100[KHz]에서 실험하였다. This paper presents the TTFC(Two Transistor Forward Converter) using Synchronous Rectifier. The two transistor forward circuit is used to decrease voltage stress of primary side and the synchronous rectifier is used to reduce current stress of secondary side. This paper compared with diode rectifier and synchronous rectifier of two transistor forward converter. The principle of operation, feature and design considerations are illustrated and verified through the experiment with a 200W 100KHz MOSFET based experimental circuit.