http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
배정이(Jeong Yee Bae)(裵井이),조성일(Seong Il Cho)(曺成一),안덕현(Duk Hyun An)(安德賢) 위기관리 이론과 실천 2011 Crisisonomy Vol.7 No.5
본 연구의 목적은 부산광역시 시민들의 낙상 현황과 실태를 분석하고 문제점을 파악하여 시민들의 낙상 사고를 예방하기 위한 프로그램 개발과 정책수립에 기초자료를 제공하는 것이다. 부산광역시 시민의 낙상 발생 현황을 파악하기 위하여 통계청 사망원인 통계연보와 3개의 응급의료센터의 손상자료 및 부산광역시 16개 구군을 대표하는 17,088가구의 53,744명을 대상으로 역학조사를 실시하였다. 95% 신뢰수준 하에서 오차한계 ±4.0%로, 본 연구 결과는 국가통계(승인 번호 : 통계협력과 09007)로 승인받았다. 자료수집기간은 2009년 5월부터 6월까지 약 2개월간에 걸쳐 훈련된 조사원들이 가정을 직접 방문하여 구조화된 설문지를 이용하여 자료를 수집하였다. 수집된 자료는 연구 목적에 따라 SPSS WIN 17.0을 이용하여 분석하였으며, 빈도와 백분율로 조사하였다. 분석결과 부산광역시 시민들의 원인별 손상사망률은 자살(62%), 운수사고(21%), 낙상(11%) 순으로 나타났으며, 낙상 사망률은 노인층에서 가장 높았고 남성(16.1명)이 여성(5.7명)보다 더 높았다. 부산광역시 낙상사망률(6.4명)은 전국 평균(5.0명) 보다 높았고, 서울특별시와 6개 광역시 중 가장 높았다. 손상유형별 내원율은 낙상이 20.3%로 가장 높았으며 여성, 남성 모두에서 가장 높았다. 낙상으로 인한 응급의료센터 내원율을 연령별로 비교한 결과, 노인층이 30.1%로 가장 높았으며 여성은 모든 연령층에서 낙상으로 인한 내원율이 가장 높았고, 남성은 성인층과 장년층을 제외한 모든 연령층에서 낙상이 가장 높은 내원율을 보였다. 최근 부산시민의 인구 중 아동의 비율은 감소하는 반면, 노년층의 인구증가로 안전취약계층이 급증하면서 낙상으로 인한 사망률로 경제적 손실이 증가하고 그로 인한 사회 경제적 부담이 가중되고 있다. 이에 정부와 관련기관 및 단체는 낙상예방을 최우선 과제로 두고 실효를 거둘 수 있는 근거중심의 안전증진사업 개발 및 보급을 위하여 노력해야 할 것이다. Fall accidents are an important cause of death and disability. They also have enormous financial implications. This study aims to report the incidence of falls in Busan. Methods: A descriptive study has been conducted. Overall, 53,744 men and women from general population were recruited in Busan. Data collected was analyzed descriptive statistics SPSS/WIN 17.0. Results: Injury statistics show that in Busan, suicide ranks highest followed by traffic accidents, fall, drowning, homicide and others. Compared to other cities, Busan now ranks first in highest fall accident rates. This is why Busan and its people exclaimed the profound need for safety measures. The most prominent injury morbidity indicator is falls. Falls occur most commonly in the elderly group and infants. This high number shows that it is a major health problem that must be addressed by accident and falls prevention programs. Conclusion: To reduce the alarming rate of falls and related excessive mortality and morbidity, efforts must be made to detect persons at risk of falling and to prevent or reduce the frequency of falls. This study gave a very useful and important data to prepare accident prevention program and to prepare accident prevention strategies.
L-PBF 공정 내 펄스파 모드를 적용한 Thin-wall 구조 및 Inconel 718 특성 평가
배정현(Jeong-Hyeon Bae),이재향(Jae-Hyang Lee),김도현(Do-hyun Kim),강동석(Dong-Seok Kang),손용(Yong Son),연시모(Si-mo Yeon) 대한전기학회 2024 전기학회논문지 Vol.73 No.5
Recent advances in additive manufacturing technology have made it possible to produce components with complex geometric structures using the Laser Powder Bed Fusion(L-PBF) process. However, there are still limitations when manufacturing extreme geometric shapes, such as thin wall. The thin walls are vulnerable to thermal deformation due to local heat accumulation in L-PBF. In this study, we applied a pulse mode with low thermal effect to manufacture ultra thin-wall structures using Inconel 718 in L-PBF and manufacturing characteristics were compared with the continuous wave emission mode. Then the process and mechanical properties of the pulse mode were analyzed through unit specimens and tensile specimens.
L-PBF 공정 내 펄스파 모드를 적용한 Thin-wall 구조 및 Inconel 718 특성 평가
배정현(Jeong-Hyeon Bae),이재향(Jae-Hyang Lee),김도현(Do-hyun Kim),강동석(Dong-Seok Kang),손용(Yong Son),연시모(Si-mo Yeon) 대한전기학회 2024 전기학회논문지 Vol.73 No.5
Recent advances in additive manufacturing technology have made it possible to produce components with complex geometric structures using the Laser Powder Bed Fusion(L-PBF) process. However, there are still limitations when manufacturing extreme geometric shapes, such as thin wall. The thin walls are vulnerable to thermal deformation due to local heat accumulation in L-PBF. In this study, we applied a pulse mode with low thermal effect to manufacture ultra thin-wall structures using Inconel 718 in L-PBF and manufacturing characteristics were compared with the continuous wave emission mode. Then the process and mechanical properties of the pulse mode were analyzed through unit specimens and tensile specimens.
지지 구조체 없는 돌출 구조의 열 누적 완화를 위한 금속 분말 용융 방식의 레이저 조사 경로 보상설계 최적화
김도현(Do-Hyun Kim),이재향(Jae-Hyang Lee),배정현(Jeong-Hyeon Bae),홍석준(Suk-Joon Hong),연시모(Si-Mo Yeon),강동석(Dong-Seok Kang),손용(Yong Son) 대한전기학회 2024 전기학회논문지 Vol.73 No.5
This study aims to achieve uniformity in heat history by mitigating heat gradients during the production of overhang structures using the metal powder melting process. Specimens with a 30-degree overhang angle were created, and monitoring of thermal radiation intensity during the process confirmed heat accumulation in the specimens. The optimized laser scan path compensation design resulted in a 5.98% reduction in the coefficient of variation of thermal radiation intensity, and X-Ray CT imaging revealed an 80.47% reduction in deformation. With the optimized laser scan path compensation design developed in this study, it is anticipated that the metal powder melting method for manufacturing aerospace components with complex shapes, including overhang structures, will yield a reduction in deformation due to alleviated heat accumulation.
전이암으로 오인된 다원성(multifocal) 결핵 1예
조인정 ( In Jeong Cho ),임소연 ( So Yeon Im ),천은미 ( Eun Mi Chun ),류연주 ( Yon Ju Ryu ),이진화 ( Jin Hwa Lee ),심윤수 ( Yun Su Sim ),장중현 ( Jung Hyun Jang ),심성신 ( Sung Shin Shim ),배정호 ( Jung Ho Bae ) 대한결핵 및 호흡기학회 2007 Tuberculosis and Respiratory Diseases Vol.63 No.2
저자들은 FDG-PET과 전산화 단층 촬영에서 인두, 복부, 흉부에 악성 종양이 의심되는 소견이 보여 점막 표피모양 암종으로 오인된 복강내 결핵, 인두 결핵, 기관지 결핵이 동반된 환자를 조직 검사를 통하여 결핵으로 진단하였고, 이 환자에게 항 결핵제 투여의 치료를 통하여 추적 전산화 단층 촬영에서 호전 경과를 보인 1예를 경험하였기에 이를 보고하는 바이다. Tuberculosis remains as a major public health problem worldwide. In addition to classic pulmonary tuberculosis, tuberculosis may sometimes present atypically. In the case of atypical tuberculosis, the unusual sites and properties that mimic other diseases can lead to a misdiagnosis and therapeutic delay. Abdominal and pharyngeal tuberculosis are uncommon extrapulmonary manifestations of tuberculosis. To the best of our knowledge, a combination of abdominal and pharyngeal tuberculosis with endobronchial tuberculosis has not been reported. We report a case of concurrent abdominal and pharyngeal tuberculosis in a patient with chronic endobronchial tuberculosis mimicking a metastatic malignancy on computed tomography and FDG-PET. (Tuberc Respir Dis 2007; 63: 173-177)
지지 구조체 없는 돌출 구조의 열 누적 완화를 위한 금속 분말 용융 방식의 레이저 조사 경로 보상설계 최적화
김도현(Do-Hyun Kim),이재향(Jae-Hyang Lee),배정현(Jeong-Hyeon Bae),홍석준(Suk-Joon Hong),연시모(Si-Mo Yeon),강동석(Dong-Seok Kang),손용(Yong Son) 대한전기학회 2024 전기학회논문지 Vol.73 No.5
This study aims to achieve uniformity in heat history by mitigating heat gradients during the production of overhang structures using the metal powder melting process. Specimens with a 30-degree overhang angle were created, and monitoring of thermal radiation intensity during the process confirmed heat accumulation in the specimens. The optimized laser scan path compensation design resulted in a 5.98% reduction in the coefficient of variation of thermal radiation intensity, and X-Ray CT imaging revealed an 80.47% reduction in deformation. With the optimized laser scan path compensation design developed in this study, it is anticipated that the metal powder melting method for manufacturing aerospace components with complex shapes, including overhang structures, will yield a reduction in deformation due to alleviated heat accumulation.