http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이인화,박종계 한국통신학회 2004 정보와 통신 Vol.21 No.4
VoIP(Voice Over IP) 기술은 인터넷 망 계층 프로토콜인 IP(Internet Protocol) 상에서 데이터 뿐만 아니라 음성 서비스를 동시에 제공할 수 있도록 지원하는 기능 이외에 멀티미디어와 각종 부가서비스를 제공할 수 있는 기술이다. 음성망과 데이터합이 어떤 형태로든 수렴, 통합하는 방향으로 진화될 것이라는 사실에는 대부분의 사람들이 이견이 없으며, 이러한 통합망에서의 가장 중요한 기술의 하나라고 인식되고 있다. VoIP 관련 표준화는 IETF와 ITU-T에서 진행되고 있으며 ITU-T는 H.323 시스템을 기반으로 하여 각종 표준을 제정하고 있으며 IETF에서는 SIP를 중심으로 표준화를 진행하고 있다. 현재 VoIP 기술에 초점이 되고 있는 주요 이슈는 데이터를 위해 최적인 패킷망을 통해 이용자의 요구를 충분히 만족시킬 수 있는 통화품질 보장 여부이다. 패킷화된 다중서비스망의 성공을 보장하기 위해서는 기존의 PSTN망과 동등한 수준의 품질을 제공하여야 한다. 본 고에서는 이러한 VoIP의 기술 동향, 시장 및 사용자 요구사항 분석, 최근의 VoIP의 이슈에 대해서 살펴보고자 한다.(중략)
유무선 통합망에서 핸드오버시 끊김없는 서비스 제공을 위한 제어 플랫품
맹두열,박종계,김성조,Maeng, Doo-Lyel,Park, Jong-Kae,Kim, Sung-Joo 한국통신학회 2009 韓國通信學會論文誌 Vol.34 No.9b
최근의 네트워크 진화 방향은 All-IP 기반의 유무선 통합을 실현하기 위하여 인프라의 공통요소인 IP 기반의 이동성에 대한 연구가 진행되고 있다. 기존의 진행되어진 대표적인 IP 기반의 이동성 기술은 IETF(Internet Engineering Task Force)의 Mobile IP(Mobile Internet Protocol)이다. 하지만 Mobile IP를 제공하기 위하여 기존의 네트워크 인프라 즉, 라우터들(FA:Foreign Agent)에게 기능을 추가 변경하여야 하는 문제와 MN(Mobile Node)이 이동할 경우 패킷 손실 문제, 지연 시간 발생 부분을 해결하기에는 한계가 발생하였다. 주 논문에서는 기존의 IP 기반의 이동성 방식이 가지고 있던 문제점들을 개선하여 IP 기반의 이동성, 품질, 보안성을 제공하는 플랫폼 구조를 제시하였다. 기존 IP 기반의 이동성 방식과의 패킷 손실 및 지연 시간에 대한 시뮬레이션 분석을 통하여 성능이 개선되었음을 보여주고 있다. Recently, IP mobility study of infra's common elements is undergoing processes to achieve FMC based on All-IP. Existing typical mobility technology based on IP is IETF's Mobile IP. However, it faced to limitations due to packet loss, delays when MN is moving on Mobile IP, also existing network infra - routers (FA)-needed to add/change the functions to support Mobile IP. In this paper, existing mobility problems based on IP and the suggested improvements for platforms which support mobility, quality, security are proposed. It discusses the performance on the current existing IP infrastructure derived from simulation analysis on mobility packet loss and delay. From the resulting data, improvements will also be outlined for optimal performance.
CT型 多段 變厚部在內의 Mode I 龜裂에 대한 龜裂成長擧動 硏究
崔鎔湜,梁源鎬,金永鎭,朴鍾桂 成均館大學校 科學技術硏究所 1992 論文集 Vol.43 No.1
A plate with multi-step varying thickness is widely used in a variety of machine components. In order to provide design data required for damage tolerant design for such components, fracture mechanics analysis was performed. Compact tension specimens with thin-to-thick geometry were used for analysis models. Three-dimensional finite element analysis was performed, and stress intensity factor was obtained by crack opening displacement extrapolation method. Analysis parameters were λ (dimensionless crack length), β(thickness ratio) and ω(width ratio). Dimensionless correction factor F values decreased rapidly as λ approached 1(thickness interface). And effect of front step was more pronounced than that of rear step.