http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박재돈,김제우,윤기완 한국정보통신학회 2001 한국정보통신학회논문지 Vol.5 No.2
스마트안테나용 적응 빔형성 알고리즘을 제안한다. 본 알고리즘은 기울기 법에 근간했으며 신호에 대한 사전정보가 필요 없다. 그리고, 계산량이 기존의 알고리즘에 비해 급격히 줄어든 장점이 있다. 본 알고리즘은 그 계산량에 비해서 성능이 또한 매우 우수하다. 컴퓨터 시뮬레이션을 통하여 본 알고리즘을 검증했다. We, for the first time, propose a novel adaptive beamforming algorithm for smart antenna. The algorithm requires neither spatial knowledge nor reference signal. The algorithm is based on gradient method and its merit is in the simplicity of calculation load while maintaining good performance. Computer simulations are presented to verify the performance.
박재돈,황해선 동의대학교 기초과학연구소 1997 基礎科學硏究論文集 Vol.7 No.1
기판의 온도를 여러가지로 달리하여 전자선 증착법으로 양질의 다결정 CdS 박막을 제작하여 광학상수(굴절률 n_f, 및 소광결수 k)는 400~3000 nm 파장영역에서 투과빛띠를 측정하여 결정하였다. 박막의 두께변화와 기판온도 변화에 따른 광학적 띠간격의 변화를 조사하였다. 박막의 두께가 증가하면 띠간격은 감소하고, 박막이 얇을 때 띠간격은 두께의 제곱에 반비례하며 이는 양자크기효과와 연관되어 있다. CdS 박막의 굴절률은 두께가 증가할수록 증가하며 굴절률의 분산경향은 Sellmeier의 분산식에 의한 단일 진동자 모형을 따른다.
박재돈,최성창,윤기완 한국정보통신학회 2001 한국정보통신학회논문지 Vol.5 No.2
최근 이동통신의 발달로 좀더 효율적인 서비스를 제공하기 위하여 많은 연구가 진행되고 있다. 본 논문에서는 하나의 전압제어발진기로 두 가지 서비스를 가능하게 하는 양대역 전압제어발진기의 두가지 형태를 제시한다. 첫 번째 형태는 스위치를 이용하여 공진주파수만을 조절한 회로이고, 두 번째 형태는 독립적인 전압제어발진기 두개를 효율적으로 연결한 형태를 가진다. In this paper, we propose two types of dual-mode voltage cont.oiled oscillators (VCO) for PCS/IMT-2000 applications. One is a VCO with controllable resonant circuit. The other type is a VCO with single output and two independent parts.
Amplify-and-Forward Two-Way Relaying System over Free-Space Optics Channels
박재돈,채찬병,윤기완 한국통신학회 2017 Journal of communications and networks Vol.19 No.5
In this paper, we analyze the performance of a two-waysubcarrier intensity-modulated (SIM) amplify-and-forward (AF)relaying system over free-space optics (FSO) communication channels. The analysis takes into consideration attenuations due to atmosphericturbulence, geometric spread and pointing errors at thesame time. We derive, in generalized infinite power series expressions,the tight upper and lower bounds of the overall outage probabilityand average probability of errors of the system. The studyfinds that this two-way subcarrier intensity-modulated AF relayingsystem using a binary phase shift keying (BPSK) modulationcould be used for practical applications in case of a weak turbulenceregime in which the required SNR is about 30 dB to obtainthe average bit error probability of 10 6. It is also noted that thepointing errors clearly degrade the performance of the two-waysubcarrier intensity-modulated AF relaying system.
군위성통신 차량용단말 X-대역 TWTA용 HVPS 개발
박재돈,장진상,동문호,Park, Jae-Don,Jang, Jeen-Sang,Dong, Moon-Ho 한국통신학회 2005 韓國通信學會論文誌 Vol.30 No.12A
The HVPS of the TWTA for military satellite communications is developed and tested. With 380 V input DC voltage, the HVPS provides -10.95 kV for Cathode, -4.27 kV for Collectorl and -6.57 kV for Collector2 of the TWT that generates 600 W X-band output signal power. The total output power of the HVPS is about 1.6 kW. The voltage ripples of Cathode, Collectorl and Collector2 are 6 V, 12 V and 6 V, respectively, which are only $0.055\%,\;0.281\%$ and $0.091\%$ compared to the absolute output voltages. 본 논문에서는 군위성통신의 차량용단말에 사용되는 X-대역 TQTA용 HVPS를 설계 및 제작하고 그 성능을 측정하였다. 본 HVPS는 X-대역에서 600 W의 RF 신호 출력을 발생시키는 TWT를 구동시키기 위하여 제작되었다. HVPS의 스위칭 주파수는 80 kHz로 설계되었고 입력전원은 380 V의 직류전원을 사용한다. HVPS의 출력전압은 Cathode 전극에 -10.95 kV의 최대전압을 발생시키고 두개의 Collector 전극에 각각 -4.27 kV, -6.57 kV의 고압 전원을 제공하며 총 출력 전력은 1.6 kW를 발생시킨다. 한편, ripple 전압의 peak-to-peak 크기는 Cathode 전극의 경우 6 V, Collectorl은 12 V, Collector 2는 6 V로서 출력전압에 비해 각각 $0.055\%,\;0.281\%,\;0.091\%$ 수준으로 상당히 안정된 전원특성을 얻었다.
박재돈,임종원,최인환 동의대학교 기초과학연구소 2000 基礎科學硏究論文集 Vol.10 No.1
Solar cells with a CuInSe₂/CdS structure were fabricated by two-step coating of CdS and indium-doped CdS on CuInSe₂thin films which had been prepared on Mo plates by using the hybrid sputtering method. The characteristics of the CuInSe₂thin films were investigated by measuring the optical absorption spectrum and the temperature dependence of the conductivity. Optical band gaps for films deposited with different Cu/In ratios ranged from 0.93 to 1.16 eV. The characteristics of the solar cells were investigated by using I-V and C-V measurements before and after heat treatment. In the case of Cu/In=0.62, the measured open-circuit voltage was 270㎷, and the short-circuit current was 23.4 ㎃/㎠. The fill factor and efficiency were found to be 0.33 and 4.1%, respectively. After annealing in air, the open-circuit voltage, the short-circuit, the fill factor, and the efficiency were 300㎷, 26㎃/㎠, 0.36, and 5.6%, respectively.