http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박윤원(Yun-Won Park),이필규(Phill-Kyu Rhee) 한국정보과학회 2002 한국정보과학회 학술발표논문집 Vol.29 No.2Ⅱ
정보화 시대가 도래하고 급격히 발전해 감에 있어 모든 형태의 정보가 가장 중요한 가치로 평가되고있고 멀티미디어가 급속히 발달함으로 인해 산업 및 생활에서 정보 보안이 매우 중요한 관건이 되어 정보보안의 여러 형태 중의 한가지로서 얼굴인식은 최근 연구가 활발하게 이루어지고 있다. 얼굴인식은 신체의 일부를 직접 접촉하지 않으므로 사용자로 하여금 불편함이나 기계적 반감을 불러일으키지 않는 장점으로 그 비중은 커질 것으로 예정되고 있다. 영상에 있어서 많은 중요한 정보가 영상픽셀들간의 고차원적인 연관 속에 담겨져 있을 것이다. ICA(Independent Component Analysis)는 이러한 고차원적인 정보를 2차원적인 정보로부터 추출하는 것이 아니라 각각의 고차원적인 정보를 직접 얻을 수 있는 장점을 이용하고 있다. 본 논문에서는 얼굴인식시스템의 첫 번째 관문인 배경화면으로부터의 얼굴영상을 구별해내는 데 있어 ICA를 적용하여 기저영상벡터공간(Source or Basis Image Space)을 구하고 그 공간에 테스트할 영상을 투영시켜 얻어진 벡터의 consine distance를 이용하여 얼굴영상을 추출하는 방법에 대해서 제안하였다.
유한요소해석을 이용한 원자로용기 압력-온도 한계곡선의 평가
이택진,박윤원,이진호,최재붕,김영진,Lee, Taek-Jin,Park, Yun-Won,Lee, Jin-Ho,Choe, Jae-Bung,Kim, Yeong-Jin 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.10
In order to operate an RPV safely it is necessary to keep the pressure-temperature (P-T) limit during the heatup and cooldown process. While the ASME Code provides the P-T limit curve for safe operation, this limit curve has been prepared under conservative assumptions In this paper the effects of conservative assumptions involved in the P-T limit curve specified in the ASME Code Sec. XI were investigated. Three different parameters the crack depth the cladding thickness and the cooling rate, were reviewed based on 3-D finite element analyses. Also the constraint effect on P-T limit curve generation was investigated based on J- T approach. It was shown that the crack depth and the constraint effect change the safe region in P-T limit curve significantly Therefore it is recommended to prepare a more precise P-T limit curve based on finite element analysis to obtain P-T limit for safe operation of an RPV.
재료내 기공결함에 의한 SH형 초음파 원거리 산란장의 신호특성에 대한 수치해석
이준현,이서일,박윤원,Lee, Jun-Hyeon,Lee, Seo-Il,Park, Yun-Won 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.1
In this study, the scattered far-field due to a cavity embedded in infinite media subjected to the incident SH-wave was calculated by the boundary element method. The effects of cavity shape and distance between internal cavity and internal point in infinite media were considered. The scattered far-field of the frequency domain was transformed into the signal of the time domain by using the Inverse Fast Fourier Transform(IFFT). It was found that the amplitude of scattered signal in time domain decreased with the increase of the distance between the detecting points of ultrasonic scattered field and the center of internal cavity in media. In addition, the time delay was clearly found in time domain waveform as the distance between the detecting points of ultrasonic scattered field and the center of internal cavity was gradually increased.
곽상록,이준성,김영진,박윤원,Gwak, Sang-Rok,Lee, Jun-Seong,Kim, Yeong-Jin,Park, Yun-Won 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.10
In order to improve Leak-Be(ore-Break methodology, more precisely the crack growth evaluation, a round robin analysis was proposed by the CEA Saclay. The aim of this analysis was to evaluate the crack initiation life, penetration life and shape of through wall crack under cyclic bending loads. The proposed round robin analysis is composed of three main topic; fatigue crack initiation, crack propagation and crack penetration. This paper deals with the first topic, crack initiation in a notched pipe under four point bending. Both elastic-plastic finite element analysis and Neuber's rule were used to estimate the crack initiation life and the finite element models were verified by mesh-refinement, stress distribution and global deflection. In elastic-plastic finite element analysis, crack initiation life was determined by strain amplitude at the notch tip and strain-life curve of the material. In the analytical method, Neuber's rule with the consideration of load history and mean stress effect, was used for the life estimation. The effect of notch tip radius, strain range, cyclic hardening rule were examined in this study. When these results were compared with the experimental ones, the global deformation was a good agreement but the crack initiation cycle was higher than the experimental result.
주조 스테인리스강 CF8M의 43$0^{\circ}C$ 열화거동에 관한 연구 (III) - 탄소성 파괴인성 평가 -
권재도,인재현,박중철,최성종,박윤원,Gwon, Jae-Do,In, Jae-Hyeon,Park, Jung-Cheol,Choe, Seong-Jong,Park, Yun-Won 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.10
A cast stainless steel may experience an embrittlement when it is exposed to approximately 30$0^{\circ}C$ for long period. In the present investigation, The three classes of the thermally aged CF8M specimie n are prepared using an artificially accelerated aging method. Namely, after the specimen are held for 300, 1800 and 3600hrs. at 43$0^{\circ}C$ respectively, the specimens are quenched in water to room temperature. Load versus load line displacement curves and J-R curves are obtained using the unloading compliance method. $J_{IC}$ values are obtained following ASTM E 813-87 and ASTM E 813-81 methods. In addition to these methods, JIC values are obtained using SZW(stretch zone width) method described in JSME S 001-1981. The results of the unloading compliance method are $J_Q$=485.7 kJ/m$^2$ for virgin material, $J_{IC}$ of the degraded materials associated with 300, 1800 and 3600hrs are obtained 369.25 kJ/m$^2$, 311.02 kJ/m$^2$, 276.7 kJ/m$^2$, respectively. The results of SZW method are similar to those of the unloading compliance method. Through the elastic-plastic fracture toughness test, it is found that the value of $J_{IC}$ is decreased with increasing of the aging time. The results obtained through the investigation can provide reference data for a leak before break(LBB) of reactor coolant system of nuclear power plants.
가압열충격 사고시 결함 이상화 방법이 구조물 건전성 평가에 미치는 영향
김진수,최재붕,김영진,박윤원,Kim, Jin-Su,Choe, Jae-Bung,Kim, Yeong-Jin,Park, Yun-Won 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.2
The reactor pressure vessel is usually cladded with stainless steel to prevent corrosion and radiation embrittlement. Number of subclad cracks may be found during an in-service-inspection due to the presence of cladding. It is specified, in ASME Sec. XI, that a subclad crack is characterized as a surface crack when the thickness of the clad is less than 40% of the crack depth. This condition is provided to keep the crack integrity evaluation conservative. In order to refine the fracture assessment procedures for such subclad cracks under a pressurized thermal shock condition, three dimensional finite element analyses are applied for various subclad cracks existing under cladding. A total of 36 crack geometries are analyzed, and the results are compared with those for surface cracks. The resulting stress intensity factors for subclad cracks are 6 to 44% less than those for surface cracks. It is proven that the flaw characterization condition as specified in ASME Sec. XI can be overly conservative for some subclad cracks.