http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
저배압 세정노즐을 적용한 접촉유로방식 습식세정시스템의 유동해석 평가
유정구,박문례,노학재,박현진 한국공업화학회 2019 한국공업화학회 연구논문 초록집 Vol.2019 No.0
습식세정시스템은 유해가스 및 미세먼지 등을 흡수액에 접촉시켜 제거하는 원리이다. 습식세정시스템은 반응기 내부의 충진물(Packing)과 처리대상물질을 기/액접촉시켜 제거하는 원리이나 충진물의 세척 및 교체에 따른 비용 문제, 충진물 오염에 따른 부식으로 2차 오염을 유발하는 문제점이 있다. 이를 해결하기 위해 습식세정시스템 내부에 설치된 충진물을 대체하고자 저배압 세정노즐을 개발하였다. 저배압 세정노즐은 하부 노즐의 난류성 기/액 접촉을 유도하고, 상부에 위치한 반사판을 통해 관성충돌을 유도하여 대상물질과 흡수액의 접촉 반응 범위가 극대화 되는 원리를 가지고 있다. 본 연구에서는 저배압 세정노즐의 구조 및 형상에 따른 압력손실 및 평균 기포율의 비교를 위해 세정노즐 사이의 수로를 제외한 간소화 노즐 시스템(Simplified nozzle system)과 노즐 사이의 수로를 고려한 원 노즐 시스템(Original nozzle system)의 두 가지 모델의 수치해석을 수행하여 노즐 사이수로 유ㆍ무에 따른 기포 생성량이 미치는 영향을 살펴보았다. ** 본 연구는 환경부 환경산업선진화기술개발사업(2017000110001)에 의해 수행되었으며, 이에 감사드립니다.
습식-펄스방전 복합시스템의 황산화물 및 질소산화물 제거성능 특성
박현진,이환영,박문례,노학재,유정구,한방우,홍기정,Park, Hyunjin,Lee, Whanyoung,Park, Munlye,Noh, Hakjae,You, Junggu,Han, Bangwoo,Hong, Keejung 한국입자에어로졸학회 2019 Particle and Aerosol Research Vol.15 No.1
Current desulfurization and denitrification technologies have reached a considerable level in terms of reduction efficiency. However, when compared with the simultaneous reduction technology, the individual reduction technologies have issues such as economic disadvantages due to the difficulty to scale-up apparatus, secondary pollution from wastewater/waste during the treatment process, requirement of large facilities for post-treatment, and increased installation costs. Therefore, it is necessary to enable practical application of simultaneous SOx and NOx treatment technologies to remove two or more contaminants in one process. The present study analyzes a technology capable of maintaining simultaneous treatment of SOx and NOx even at low temperatures due to the electrochemically generated strong oxidation of the wet-pulse complex system. This system also reduces unreacted residual gas and secondary products through the wet scrubbing process. It addresses common problems of the existing fuel gas treatment methods such as SDR, SCR, and activated carbon adsorption (i.e., low treatment efficiency, expensive maintenance cost, large installation area, and energy loss). Experiments were performed with varying variables such as pulse voltage, reaction temperature, chemicals and additives ratios, liquid/gas ratio, structure of the aeration cleaning nozzle, and gas inlet concentration. The performance of individual and complex processes using the wet-pulse discharge reaction were analyzed and compared.