http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박동철(Dong-Chul Park),권오혁(Oh-Hyuk Kwon),류홍균(Hong-Kyun Ryu),이규송(Kyu-Song Lee) 한국전자파학회 2015 한국전자파학회논문지 Vol.26 No.12
본 논문에서는 Enhanced Adaptive Genetic Algorithm(EAGA)를 이용하여 두 가지 종류의 컨포멀 배열 안테나의 패턴합성 과정을 기술하였다. 한 종류는 2차 함수 형태의 실린더 도체 위에 배열된 1×16 배열 안테나이고, 다른 종류는 2차함수 곡선의 회전체 곡면 도체 위에 배열된 18개 소자 배열 안테나이다. 패턴 합성시 각 소자의 능동 소자 패턴을 이용하였고, 특히 회전체형 배열 안테나의 경우, 합성 시간을 크게 줄이기 위해 동심원형 평면 배열 안테나의 능동 소자 패턴을 구한 뒤 이를 변환하여 사용하였다. 제안한 합성 기법의 타당성을 검증하기 위해 MATLAB 내에서 합성된 배열 안테나의 패턴과 MWS(Microwave Studio) 내에서 구현된 배열 안테나의 패턴을 비교하였으며, 또한, 1×16 배열 안테나의 경우는 측정 패턴과 합성 패턴도 비교하였다. This paper describes the pattern synthesis method of two kinds of conformal array antenna using the Enhanced Adaptive Genetic Algorithm (EAGA). One is the 1×16 conformal array antenna on a curved cylindrical metallic surface with quadratic function, and the other is the 18-element conformal arrary antenna on a metallic surface obtained by the rotation of a quadratic function curve around the axis. The active element pattern is utilized in the pattern synthesis. Especially for the case of the rotated-type conformal array antenna the transformed active element pattern obtained from the Euler’s angle rotation of the active element pattern of the planar concentric array is utilized, which reduces the synthesis time a lot. To verify the validity of the proposed synthesis method the MATLAB results are compared with the MWS results. Furthermore, for the case of 1×16 conformal array antenna the measured results are compared with the MATLAB synthesized results.
박동철 ( Dong-cheol Park ),김윤해 ( Yun-hae Kim ) 한국복합재료학회 2016 Composites research Vol.29 No.5
본 연구에서는 동일한 구조의 모자형 보강재를 이용하여 일체형 동시접착 구조의 보강패널시편을 제작하였다. 일반적인 동시접착 보강패널 시편과 탄소에폭시 복합재를 이용하여 제작된 카울플레이트(Caul Plate)를 적용한 동시접착 보강패널 시편의 2가지 형태 시편을 제작하였으며 일반 동시접착 보강패널 시편에서는 패널 상에서 보강재가 적용되지 않은 부위가 적용된 부위보다 더 두꺼운 패널 두께를 가지고 그 연결부위에는 0.61 mm높이 및 3.29 mm 길이의 플라이웨이브 현상이 나타났다. 카울플레이트가 적용된 보강패널 시편에서는 보다 균일한 압력 전달로 인하여 0.22 mm 높이와 1.37 mm 길이의 완화된 웨이브 현상을 보이면서 약 50% 이상 개선된 결과를 얻을 수 있었다. In this study, integrated co-bonded panels with the same configuration of hat stiffeners were fabricated and measured for ply waviness phenomenon. Total specimens consisted of 2 types; 1) the general co-bonded panel and 2) the co-bonded panel with caul plate made of carbon epoxy composite materials. The first general co-bonded panel specimen exhibited that laminate thickness on the stiffener location area was much thicker than the nonstiffener area and, there was ply waviness with 0.61 mm height and 3.29 mm length. In the second co-bonded panel specimen, the reduced waviness with 0.22 mm height and 1.37 length resulted in more than 50% improvements, which is due to the uniform pressure distribution of co-bonded interface by caul plate.
분산커널 기반의 퍼지 c-평균을 이용한 음악 데이터의 장르 분류
박동철(Dong-Chul Park) 대한전자공학회 2009 電子工學會論文誌-CI (Computer and Information) Vol.46 No.3
본 논문은 효율적인 음악 데이터의 분류를 위한 방법으로 분산커널 기반의 퍼지 c-평균을 이용한 분류기 모델을 제안한다. 분산 커널 기반의 퍼지 c-평균은 주어진 오디오 데이터에서 추출된 특징벡터의 평균과 공분산 정보를 동시에 이용하여 기존의 평균값만을 사용하는 방식에 비해 성능을 월등히 향상시킬 수 있는 장점이 있다. 사용된 방식은 확률적 분포로 주어지는 데이터 사이의 거리를 분산거리척도로 측정하고, 복잡한 분류 경계를 단순화 시키는데 효율적인 커널 개념을 사용함으로서 분류의 정확도를 극대화 시킬 수 있는 장점이 있다. 제안하는 분류기의 성능을 평가하기 위하여 고전음악, 컨트리음악, 힙합, 재즈의 4개의 장르 음악데이터를 총 1200개 수집하여 실험을 진행하였다. 실험의 결과 제안된 분산커널 기반의 퍼지 c-평균을 이용하는 분류기는 기존의 방식과 비교하여 분류정확도에서 평균적으로 17.73% - 21.84%의 성능향상을 보여준다. An approach for the classification of music genres using a Fuzzy c-Means(FcM) with divergence-based kernel is proposed and presented in this paper. The proposed model utilizes the mean and covariance information of feature vectors extracted from music data and modelled by Gaussian Probability Density Function (GPDF). Furthermore, since the classifier utilizes a kernel method that can convert a complicated nonlinear classification boundary to a simpler linear one, the classifier can improve its classification accuracy over conventional algorithms. Experiments and results on collected music data sets demonstrate that the proposed classification scheme outperforms conventional algorithms including FcM and SOM 17.73% - 21.84% on average in terms of classification accuracy.
박동철(Dongchul Park),김태연(Taeyeon Kim),유준(Joon Lyou) 대한전기학회 2007 대한전기학회 학술대회 논문집 Vol.2007 No.10
This paper presents a real-time scheduler for nuclear safety system. According to constraints and requirements of nuclear safety system, scheduler design analysis is done and algorithms are developed for implementation. Using DSP based hardware, a real-time scheduler is realized. Consequently, this paper shows the performance of periodical software through the monitoring program.