http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
FFF 방식으로 구현한 3D Printed Electronics 의 기저부 재질에 따른 전력 주파특성연구
김종경(J. K. Kim),김세명(S. M. Kim),이성엽(S. Y. Lee),김지언(C. Y. Kim) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.5월
3D Printed Electronics는 폴리머를 이용한 3D Printing 기술과 전도체 적층 및 전자 부품의 교차 조합으로 종전의 PCB 기반의 전자회로와 그 위에 전자부품 납땜 접합으로 전자 제품을 제조하는 방식을 대체하는 기술이다. 특히 PCB 기판을 통한 제조의 경우 기판 제작과 하우징과의 재조립등의 여러 공정이 필요로 하지만 적층 제조를 이용한 3D Printed Electronics의 경우 자유로운 형상이 쉽게 구현되고 특히 비전도성 프린팅 소재에 곧바로 전도체 및 부품을 삽입 내장함으로써 공정 단순화가 쉬운 장점이 있다. 본 연구에서는 3D Printed Electronics의 Application 로 선행 연구에서는 무선 전력전송용 코일을 적층 제조 공법으로 구현하는 기술을 연구하였다. 연구의 연장으로 전력전송용 코일 제작 시 FFF (Filament Fusion Fabrication)방식에 사용되는 기저부 물질의 전기적 특성으로 유전율이 소재별로 다른 것을 실험으로 파악하였고, 이러한 기저부 물질이 적층 제조공법으로 제조한 코일에서 전자기적 특성에 미치는 영향을 분석하고자 본 연구에서는 기저부 물질 별 적층 제조로 제조된 코일의 주파수 응답을 실험적으로 측정 분석하였다. 본 발표에서는 FFF 방식에 주로 사용되는 PLA, TPU, ABS 3 가지 소재 별 유전율과 이를 이용한 코일에서 기저부가 코일의 고유 주파수에 어떠한 영향을 주었는지 실험 결과를 발표하며 분석한 결과에 관해 논의하고자 한다.
황형진(H.J. Hwang),문재원(J.W. Moon),김종경(J.K. Kim),안진우(J.W. Ahn) 전력전자학회 2003 전력전자학술대회 논문집 Vol.2003 No.7(2)
This paper presents a design and characteristics analysIs of a SRM drive for EPS(Electrically Power Steering) applicatIOn. A conventional dnving room space and mechanIcal structure are suggested in design stage In the restricted desIgn conditions, motor parameters are determined for sufficient torque and speed<br/> For the smooth torque generation and simple circuit of power system, 12/8 motor drive is considered. With FEM and magnetic circuit analysis, designed motor is simulated to meet the requirement of specifications. Effectiveness of the suggested SRM drive for EPS application is verified by the manufactured prototype motor drive tests.
김상은(S E Kim),김용성(Y S Kim),장옥배(O B Jang),김종경(J K Kim) 한국정보과학회 1992 한국정보과학회 학술발표논문집 Vol.19 No.2
ICAI 시스템을 개발하기 위해서는 많은 경비와 시간이 소요된다. 특히 현재 대부분의 ICAI 시스템은 개별 학습을 위해 필수적인 특정 영역의 학습자 모델을 개발하는데 많은 시간과 노력을 소비하고 있다. 이를 위해서 모든 영역에 적용 가능한 지식베이스를 이용한 영역 독립적(KBDI Knowledge Base Domain Independent) 학습자 모델을 제공함으로써 위의 제한점을 극복하고자 한다.
바이오어쎄이 측정오차의 통계적 분포가 섭취량 추정판에 미치는 영향
이태영,김종경,Lee, T.Y.,Kim, J.K. 대한방사선방어학회 2006 방사선방어학회지 Vol.31 No.1
본 연구의 목적은 바이오어쎄이 측정오차의 통계적 분포가 섭취량 추정값에 미치는 영향을 분석하여 오차의 분포를 선정하는데 필요한 기준을 제시하는데 있다. 이를 위하여 본 연구에서는 오차가 정규분포와 대수정규분포를 따른다고 가정한 경우에 대해 최대우도법을 사용하여 섭취량을 평가하였고 그 결과를 서로 비교해 보았다. 본 연구의 결과에 따르면, 검출한도보다 약간 높은 값을 갖는 폐 잔류량 측정결과의 경우 두 분포사이에서의 차는 거의 무시할 수 있을 정도로 작게 나타났다. 그러나 일일 소변 배설률에 대한 측정결과의 경우 오차가 대수정규분포를 따른다고 가정하였을 때의 결과가 정규분포를 따른다고 가정하였을 때의 결과보다 거의 10 % 정도 높게 평가되었다. 이러한 사실로 비추어 볼 때 불착도 요소가 계측통계 오차에 주로 기인되는 경우 오차의 분포가 섭취량 추정값에 거의 영향을 미치지 않는 것으로 사료되나, 불확도 요소에서 그 이외의 오차가 지배적인 경우에는 대수정규분포를 가정하여 섭취량을 추정하는 것이 바람직하다고 판단된다. The purpose of this study is to provide the guidance necessary for making a selection of error distributions by analyzing influence of statistical distribution for a type of bioassay measurement error on the intake estimation. For this purpose, intakes were estimated using maximum likelihood method for cases that error distributions are normal and lognormal, and comparisons between two distributions for the estimated intakes were made. According to the results of this study, in case that measurement results for lung retention are somewhat greater than the limit of detection it appeared that distribution types have negligible influence on the results. Whereas in case of measurement results for the daily excretion rate, the results obtained from assumption of a lognormal distribution were 10 % higher than those obtained from assumption of a normal distribution. In view of these facts, in case where uncertainty component is governed by counting statistics it is considered that distribution type have no influence on intake estimation. Whereas in case where the others are predominant, it is concluded that it is clearly desirable to estimate the intake assuming a lognormal distribution.