http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이일용(I.Y. Lee),유새롬(S.R. Yoo),김진규(J.K. Kim),김두만(D.M. Kim) 대한기계학회 2012 대한기계학회 춘추학술대회 Vol.2012 No.11
The rubber is the most commonly used in materials in the field of tires because of special viscoelastic property. But the friction occurs when the tire constantly touches with the ground. As a result, it causes an conditions effecting to the friction-energy are the temperature, the roughness of the ground, the shape of the tread, the weight, and the materials. In this study, the analysis was preceded by considering the normal force and the horizontal velocity to the rubber. And ABAQUS/explicit was used in the analysis. The contact pressure, the shear force and the slip-distance are calculated. Then the friction-energy was derived. Basis on these results, the actual behavior of the rubber and the data were compared with each other.
IPL 처리를 통한 고분자 나노구조의 기계적 특성 향상 연구
김도아,김두인,정명영,Kim, D.,Kim, D.I.,Jeong, M.Y. 한국마이크로전자및패키징학회 2020 마이크로전자 및 패키징학회지 Vol.27 No.4
논문에서는 고분자 나노구조 필름의 기계적 물성을 향상하기 위하여 광열효과를 이용한 열처리 공정을 응용하여 나노임프린트로 제작된 고분자 나노구조 필름의 기계적 물성에 미치는 영향을 규명하였다. Hybrid resin과 UV 나노임프린트을 이용하여 저반사 나노구조를 성형하고 IPL (intense pulsed light)를 이용하여 열처리를 수행한 뒤, 제작된 나노구조 필름의 투과율과 내스크래치성을 평가하여 나노구조의 성형성과 기계적 물성의 변화를 관찰하였다. 나노패턴의 특성에 의해서 나노구조의 투과율은 550 nm 파장에서 97.6%로 고투과율의 기능을 확인하였으며, IPL을 이용한 열처리를 진행한 경우 Hotplate를 이용한 열처리보다 경도는 0.51 GPa로, 0.27 GPa로 열처리한 시편에 비해 1.8배 향상하였으며, 동일 실험 조건에서 탄성율은 Hotplate 이용 시 4 GPa에서 IPL 이용 시 5.9 GPa로 1.4배 증가하였다. In this paper, We investigated the effect of heat treatment process using photo-thermal effect in order to improve mechanical properties of nanostructure on polymer films made by nanoimprint process with hybrid resin. Nanostructures which have a low refractive characteristic were fabricated by UV nanoimprint and after that heat treatment was performed using IPL (intense pulsed light) under process condition of 550 V voltage, pulse width 5 ms, frequency 0.5 Hz. The transmittance and mechanical property of fabricated nanostructure films were evaluated to observe changes in the pattern transfer rate and mechanical properties of nanostructures. The transmittance of the nanostructure was measured at 97.6% at 550 nm wavelength. Nanoindentation was performed to identify improved anti-scatch properties. Result was compared by the heat source. In case of post treatment with IPL, hardness was 0.51 GPa and in the case of hotplate was 0.27 GPa, resulting the increase of hardness of 1.8 times. Elastic modulus of IPL treated sample was 5.9GPa and Hotplate treated one was 4GPa, showing the 1.4 time increase.
여나은,조원경,김두인,정명영,Yeo, N.E.,Cho, W.K.,Kim, D.I.,Jeong, M.Y. 한국마이크로전자및패키징학회 2017 마이크로전자 및 패키징학회지 Vol.24 No.3
본고에서는 임프린트로 제작된 저반사 필름의 내스크래치 특성 향상을 위해 급속 냉각 방법을 제안하였다. 냉각시간을 변수로 하여 기계적인 특성과 광학적 특성에 대한 영향을 평가하였다. 냉각 시간에 따른 기계적 특성 평가 결과 냉각 시간이 증가할수록 내스크래치 특성이 향상되는 거동을 보였지만, 광학적 특성 평가 결과 냉각 시간이 증가할수록 스크래치 발생 부분의 반사율이 매우 증가하는 경향을 보였다. 이를 통하여 냉각 시간에 따라 잔류 응력 변화가 발생하고 나노 구조 표면 형상에 영향을 주어 내스크래치 특성 및 광학적 특성에 영향을 줄 수 있음을 확인하였다. In this study, rapid cooling method was proposed to improve the anti-scratch performance of anti-reflection film fabricated by nanoimprint lithography. Effects of cooling time on the mechanical properties and optical properties were evaluated. Pencil hardness measurements showed that anti-scratch performance enhanced as the cooling time increased while characterization on the optical property showed that reflectance on scratch increased as the cooling time increased. Therefore, it was concluded that the anti-scratch performance and optical properties are highly influenced by the cooling time. The observed results explained in terms of residual stress and free volume in polymeric materials.
반사방지 나노구조의 성형성과 광학적 특성에 대한 이형 온도의 영향
여나은,심영보,조상욱,김두인,김기남,장경수,정명영,Yeo, N.E.,Shim, Y.B.,Cho, S.U.,Kim, D.I.,Kim, K.N.,Jang, K.S.,Jeong, M.Y. 한국마이크로전자및패키징학회 2016 마이크로전자 및 패키징학회지 Vol.23 No.2
본에서는 저반사 나노구조 필름의 열 나노임프린트 공정 최적화를 위해 나노구조의 성형성과 광학적 특성에 대한 이형 온도의 영향을 평가하였다. 이형 온도에 따른 광학적 특성을 평가한 결과 $70^{\circ}C$까지는 이형 온도가 증가함에 따라 투과율과 반사율 특성이 향상되는 거동을 보였으나 그 이후에는 오히려 투과율이 감소하고 반사율이 증가하는 경향을 보였다. 이와 같은 이형온도에 따른 거동은 성형성에도 유사하게 관찰되었으며 자유체적 형성과 고분자 유동에 의한 것으로 보인다. 따라서, 이형 온도에 따라 고분자의 유동과 자유체적의 형성에 의한 패턴의 성형성이 결정되며, 이로 인해 광학적 특성에 영향을 줄 수 있음을 확인하였다. In this study, effects of demolding temperature (DT) on the formability and optical properties were evaluated in order to optimize thermal nanoimprint lithography for anti-reflective film. Characterization on optical property showed that optical performance was gradually enhanced as the DT increased up to $70^{\circ}C$ while the transmittance and the reflectance was degraded as the DT increased further to $100^{\circ}C$. In addition, similar behavior was observed from formability analysis. It was contributed to the formation of free volume and viscose flow. Therefore, it was concluded that the formability and optical property are highly influenced by the formation of free volume and viscous flow of polymer depending on the DT.