http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
기모직물의 가공공정 및 기모횟수가 역학적 특성치에 미치는 영향 (제1보) : 역학적특성치를 중심으로 Mecanical Properties of Brushed Fabrics
권헌선,권오경,성수광 한국의류학회 1994 한국의류학회지 Vol.18 No.4
This study was accomplished to investigate the mechanical properties and handle according to treatment processes and brushing condition. For this study, grey fabrics of blended ratio of polyester 65%: cotton 35% were bleached and dyed. These fabrics were then brushed 1, 3, 5 and 7 times. The mechanical properties were measured with a KES-F system and the mechanical data were then transformed into hand values by the conversion equation, that is, KN-201-MDY. The results obtained by the analysis are as follows; 1) The variation of mechanical properties was remarkable in the initial brushing of 1∼3 cycles for all of grey, bleached and dyed fabrics. The values of RT, 2HB, B, G, 2HG5, MMD and SMD were decreased and MIU, WC and T were increased with the increase of number of brushing. 2) LT, B, 2HB, G, 2HG, 2HG5, MMD, SMD and W of dyed fabrics which is coincident with the end use showed lower values than those of grey or bleached fabrics, but MIU, WC and T were higher. 3) From the variation of hand value, stiffness of dyed fabric showed lower value than that of grey or bleached fabric. On the other hand, smoothness, soft feeling and total hand values of dyed fabric were higher. Especially, dyed fabric showed the highest total value at the 3 cycles of brushing condition.
시판 한복지의 태에 관한 연구(l) -역학적 특성과 기능 특성치-
권헌선,성수광,Gwon, Heon-Seon,Seong, Su-Gwang 한국섬유공학회 1998 한국섬유공학회지 Vol.35 No.6
This study was conducted to examine the mechanical and functional properties of fabrics for Korean folk clothes (KFC) which have reflected several advantages such as natural features and life style, by means of KES-FB system with 160 kinds of fabrics for KFC. Silk fabrics are superior to polyester fabrics in surface properties and shear elasticity building box-shaped silhouette. On the other hand, polyester fabrics show sufficient ability to recover from bending deformation.
권헌선,권오경,성수광 한국의류학회 1994 한국의류학회지 Vol.18 No.5
This study was accomplished to investigate drape coefficient and wrinkle recovery of brushed fabrics according to treatment processes and brushing conditions. For this study, grey fabrics of blended ratio of polyester 65%: cotton 35% were bleached and dyed. These fabrics were then brushed 1, 3, 5 and 7 times. Drape coefficient and wrinkle recovery of brushed fabrics were measured by drape tester and shirley crease recovery tester respectively. The experimental results were analysed statistically to relate mechanical properties, handle, drapability, and wrinkle recovery. 1) Drape coefficients of dyed fabric showed lower values and wrinkle recovery showed higher ones than those of bleached and dyed fabrics. Especially dyed fabric brushed 3 times showed good appearance and form stability. 2) Considering the blocked properties that contribute to the drape coefficient and wrinkle recovery of brushed fabrics, bending and shearing properties had a high degree of correlation with brushed fabrics, +??, B/W, ,??, 2HG/G, and 2HB/W showed a high positive correlation with drape coefficient and a high negative correlation with wrinkle recovery.
시판 한복지의 태(hand)에 관한 연구(1) 주관적 감각치와 역학량과의 상관성
권헌선 ( Hyun Sun Kwon ),권오경 ( Oh Kyung Kwon ),성수광 ( Su Kwang Sung ) 한국감성과학회 1997 연차 학술대회 논문집 Vol.1997 No.-
The purpose of this study is to evaluate the effect of mechanical properties on handle of fabrics for some of the Korean women``s clothes. 160 different kinds of commercial silk and polyester fabrics were used for this study. Mechanical properties were measured by the KES-FB fabric testing systems and six hand values, suggested by HESC, had been judged by the experts in factories, so called by means of hand judgements. and also, the technique of stepwise-block-regression method was applied to investigate relationship between sensory and mechanical properties. Finally, we have obtained useful formulas for calculation the hand values of fabrics for Korean clothes.
김정숙,권헌선,성수광 한국의류산업학회 2004 한국의류산업학회지 Vol.6 No.3
The situation of wearing of surgery gown and their awareness were surveyed to clinicians and nurses in operation rooms of major university hospitals in the country to develop and manufacture surgery gowns for medical personnels. The survey result was quantified to be used as a base data for design of surgery gowns with freshness and convenience as well as safety to wearers. In the inspection of surgery gowns focused on materials (cotton raw material and disposable nonwoven) and dissatisfaction, there was no significance in the activity and freshness with p-).745 and p-0.367, respectively, however, there was a significance in safety and management with p-0.011 and 0.049, respectively: disposable nonwoven gown showed higher satisfaction level in safety and management compared to cotton gowns.
편성조건이 Interlock 편성포의 물성에 미치는 영향(III) -드레이프성 및 기능 특성치에 관하여-
권오경,권헌선 한국섬유공학회 1996 한국섬유공학회지 Vol.33 No.3
This study was conducted to determine the effect of yarn count(combination of Ne 30's, 40's, 50's(CM)) and stitch density(CPI of 34, 37, 40) of interlock knitted fabric on the torapability and functional value which were derived from the basic mechanical properties for the purpose of provide the basic data for constructing high functional knitted fabrics were produced with good appearance and wear sensation. The experimental results were statistically analyzed to investigate the elects of drape coefficient, functional values and mechanical properties by knitting conditions.
권오경,권헌선,나영주 한국의류산업학회 2000 한국의류산업학회지 Vol.2 No.2
This study was carried out to evaluate the distribution of mechanical and thermal properties of 14 sorts of tencel fabrics. Three kinds of cellulosic fabrics such as cotton 100%, cotton/tencel 50/50% and rayon 100% were used to compare with tencel fabrics. Furthermore, for the comparison of thermal properties, these fabrics were repeatedly washed 1, 3, 5, 10, 15 and 20 times respectively The mechanical properties were measured by the KES-FB system and Thereto Labo II type was employed to measure the thermal properties of warmth retaining and contact warm/cool feeling(q_(max)). The experimental results were analysed statistically to relate the mechanical and thermal properties. Tencel showed sufficient ability to recover from bending deformation and drapability comparing with other cellulosic fabrics and had a silhouette which goes along with the body.
성수광,권헌선,이환덕 한국의류산업학회 2000 한국의류산업학회지 Vol.2 No.2
This study investigated mechanical properties, drape coefficients and node indices of stretch fabrics. We applied mechanical properties to exhibited tailorability control in HESC and evaluated making-up. The mechanical properties such as tensile, bending, shearing, compression, surface characteristic values, thickness and weight were measured by the KES-F system and drape coefficient by drape tester. The summarized results of this study were as follows; First, stretch fabrics, almost, shown high stretch in weft inserted polyurethane yarn fabric and had a ±2σ(sigma) range of shearing, compression, surface and thickness, except bending and weight, as compared with Japanese women's thin dress fabrics. Second, bending had a positive correlation in stiffness, anti-drape and flexibility & softness. Shearing had a negative correlation in crispness and scroop. Surface properties had a high contribution in fullness & softness. Third, The drape coefficient was found by measuring the mechanical properties according to the obtained regression equation. Forth, many problems are expected in overfeed and cutting operations in sewing process. In the decision of the good external appearance using TVA, only 26 of 55 samples are included in the range of the good external appearance. Fifth, in the regard of the result for sewing control, warp values are not necessary to control in the all kind of items. But weft value in the RT and EM are out of non-control zone. So we need a special management during sewing process.