http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임무 S/W 시험을 위한 피드백 데이터의 기댓값 검증 자동화 도구 개발
권기봉(GI-Bong Kwon),이하연(Ha-Yoeun Lee),하석운(Seok-Wun Ha) 한국항공우주학회 2021 韓國航空宇宙學會誌 Vol.49 No.10
항공기 결함은 항공기 운영 및 조종사의 생명과 직결된 중요한 사항으로 항공기 조종 중 발생하는 임무 소프트웨어의 결함은 조종사 임무수행 및 안전에 심각한 영향을 미친다. 항공기 개발을 주관하는 단체나 소프트웨어 결함을 개발 초기에 식별하고 제거하기 위해 프로세스를 강화하고 많은 공수와 시간을 할애하고 있지만 임무 소프트웨어의 특성상 타 항전 장비와 강한 기능적 결합도(Coupling) 및 높은 복잡도(Complexity)를 가지고 있어 기존 시험 방법을 통한 소프트웨어 결함식별 및 제거에 제약이 따른다. 본 연구는 임무 컴퓨터 연동 장비의 통신 데이터 중 피드백 데이터의 기댓값 검증을 자동화하는 도구를 개발하여 데이터 무결성 검증을 통한 임무 소프트웨어 건전성 확보 및 시험 비용 감소 효과를 분석한다. Aircraft defects are important matters directly related to the operation of the aircraft and the life of the pilot. The defects in the mission software that occur during aircraft control seriously affect the pilots mission performance and safety. Therefore, the organization in charge of aircraft development or software defects are reinforced in the process to identify and eliminate defects in the early stages of development, and a lot of labor and time are spent, but due to the nature of the mission software, strong functional coupling with other avionics and high complexity, so there are restrictions on the identification and removal of software defects through the existing test method. This study analyzes the effect of securing mission software integrity and reducing test cost through data integrity verification by developing a tool that automates the verification of expected value of feedback data among communication data of mission computer interlocking equipment.
급속응고한 Ag-Sn-In계 접점재료의 미세조직에 미치는 Te 의 영향
장대정,권기봉,김영주,조대형,남태운,Chang, Dae-Jung,Kwon, Gi-Bong,Kim, Young-Ju,Cho, Dae-Hyoung,Nam, Tae-Woon 한국전기전자재료학회 2007 전기전자재료학회논문지 Vol.20 No.1
Contact material is widely used as electrical parts. Ag-CdO has a good wear resistance and stable contact resistance. But the disadvantages of Ag-Cd alloy are coarse Cd oxides and harmful metal, Cd. Then Ag-Sn alloy that has stable and fine Sn oxide at high temperature has been developed. In order to investigate the effect of Te additional that affects the formation of the oxide layer on the surface and the formation of oxide in matrix Ag, we studied the microstructures and properties of Ag-Sn-In(-Te) material fabricated by rapid solidification process. The experimental procedure were melting using high frequency induction, melt spinning, and internal oxidation. Specimens were examined and analyzed by Transmission electron microscopy(TEM), energy dispersive X-ray spectroscopy(EDS) and Vickers hardness. As a result, internal oxidation was completed even at $600^{\circ}C$. Te forms coarse $In_{2}TeO_{6}$ phase and makes fine and well dispersed $SnO_{2}$ Phase. 0.3 wt% Te shows favorable properties.