http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Body Floating-GGNMOS의 DCGS에 따른 ESD 보호회로의 감내특성의 변화에 관한 연구
도경일(Kyoung-il Do),박준걸(Park Jun-Geol),권민주(Min-Ju Kwon),구용서(Yong-Seo Koo) 대한전자공학회 2016 대한전자공학회 학술대회 Vol.2016 No.6
The structrure of proposed ESD protection circuit is consist of a adjustive NMOSFET and a main NMOSFET. A adjustive NMOSFET is used to control the body of a main NMOSFET. Using the TCAD simulation, the proposed ESD protection circuit has low-trigger-voltage, and high-holding -voltage. Also, the proposed ESD circuit has improved robustness by using DCSG layout technique. The Simulation result show it have improved robustness
RCS/ISAR를 이용한 레이다 표적분석 기법 및 소프트웨어 개발
권경일,유지희,정명수,윤태환,Kwon Kyoung-IL,Yoo Ji-Hee,Chung Myung-Soo,Yoon Taehwan 한국군사과학기술학회 2004 한국군사과학기술학회지 Vol.7 No.2
A development of a software on radar target signature analysis is presented in this paper The target signature includes Radar Cross Section(RCS) prediction, Range Profile(RP) processing and Inverse Synthetic Aperture Radar(ISAR) processing. Physical Optics(PO) is the basic calculation method for RCS prediction and Geometrical Optics(GO) is used for ray tracing in the field calculation of multiple reflection. For RP and ISAR, Fast Fourier Transform(FFT) and Matrix Pencil(MP) method were implemented for post-processing. Those results are integrated into two separate softwares named as Radar Target Signature Generator(RTSG) and Radar Target Signature Analyser(RTSA). Several test results show good performances in radar signature prediction and analysis.
실시간 영상형성 및 원시데이터 획득용 SAR 테스트 베드
신현익,권경일,윤상호,김형석,황정훈,고영창,유응노,김진우,Shin, Hyun-Ik,Kwon, Kyoung-Il,Yoon, Sang-Ho,Kim, Hyung-Suk,Hwang, Jeonghun,Ko, Young-Chang,You, Eung-Noh,Kim, Jin-Woo 한국군사과학기술학회 2017 한국군사과학기술학회지 Vol.20 No.2
Synthetic aperture radar(SAR) has been widely used for reconnaissance. It provides high-resolution, day-and-night and weather-independent images for a multitude of applications. Because SAR coherently combines many viewing angles to effectively create a large aperture(narrow beam) radar, the test-bed should be capable of moving straightly SAR sensor for the integration angle to meet resolution. This paper describes the test-bed developed to test and evaluate the SAR performance. It forms high-quality images in real time and saves the raw data for the purpose of post processing on the ground.
무인기 탑재 장비 간 상호 EMI를 고려한 효율적인 안테나 배치 방안
김춘원(Choon-Won Kim),김지훈(Ji-Hoon Kim),권경일(Kyoung-Il Kwon),정덕조(Deok-Cho Chung) 한국항공우주학회 2011 韓國航空宇宙學會誌 Vol.39 No.10
본 논문에서는 무인기에 탑재되는 장비간의 EMI(Electromagnetic Interference)를 고려한 효율적인 안테나의 배치방법을 제안하였다. 분석은 무인기에 사용되는 장비 중에서 인접한 주파수 대역을 사용하는 음성통신 무전기, 제어용 데이터링크, TCAS(Traffic Alert Collision & Avoidance System)와 GPS(Global Positioning System)에 대하여 이루어졌다. 분석 방법은 두 단계로 구성되며, 첫 번째 단계는 안테나 장착 시 무인기 구조물에 의한 안테나 복사패턴과 반사손실 특성 변화를 관찰하여 양호한 특성을 나타내는 지점을 선정하는 것이며, 두 번째 단계는 안테나간의 결합특성과 장비의 송신 스펙트럼을 고려하여 장비간의 간섭 정도를 분석하는 것이다. 이러한 분석 과정은 개발단계에서 장비 간 EMI를 예측하여 대책을 수립할 수 있는 도구로 사용될 수 있다. This paper presents An efficient method of antenna placement considering EMI(Electromagnetic Interference) between equipments which are mounted on the UAV(Unmanned Air Vehicle). The analysis is accomplished for voice communication radio, control datalink, TCAS(Traffic Alert Collision & Avoidance System) and GPS(Global Positioning System) which are vulnerable to EMI because the frequencies are close to each other. There are two steps for analysis procedure : The first one is selecting antenna position on the UAV by monitoring return loss and pattern variation of each antenna. The second one is analyzing EMI via antennas between equipments. In the EMI analysis, spurious level of each transmitter, coupling level between antennas and system noise property are considered. This procedure can be used to predict EMI between equipments in development stage.