http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
형상기억합금 소재의 골절치료용 골고정재의 접촉압 시험에 관한 기초연구
변태민(Tae-Min Byun),고철웅(Cheol-Woong Ko),김남구(Nam-Gu Kim),임신혁(Sin-Hyouk Yim),허신구(Shin-Goo Hur),황창윤(Chang-Yun Hwang),강승백(Seung-Baik Kang) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.2014 No.2
본 연구에서는 대퇴골 골절치료용 형상기억합금 소재의 고정재 개발을 위하여 골고정재 접촉압 시험 장비를 개발하였다. 개발된 시험장비와 감압지를 이용하여 형상기억합금 소재의 골고정재(직경 25mm, 30mm)와 원형 지지봉(직경 40mm)이 접촉하였을 때 발생하는 접촉압을 측정하였다. 측정된 접촉압 분석 결과, 형상기억합금 소재의 골고정재의 온도 변화에 따른 접촉압 발생 거동을 확인하였고, 향후 생체시험용 Saw-bone을 적용하여 추가적인 접촉압 시험을 수행 예정이다.
김효선(Hyo-Seon Kim),고창용(Chang-Yong Ko),전창수(Chang-Soo Chon),고철웅(Cheol-Woong Ko),오종건(Jong-Keon Oh),윤종인(Join-In Youn),신태민(Tae-Min Shin),김한성(Han-Sung Kim),이법이(Beob-Yi Lee),임도형(Do-Hyung Lim) 대한체질인류학회 2008 해부·생물인류학 (Anat Biol Anthropol) Vol.21 No.4
최근 한국인 위팔뼈의 계측학적 특징에 대한 연구는 거의 없다. 또한, 한국인과 서양인의 위팔뼈에 대한 계측학적 특정을 비교한 연구는 아직까지 없다. 따라서 본 연구에서는 한국인 위팔뼈의 계측학적 특징을 살펴보고 이를 서양인 위팔뼈의 계측학적 특징과 비교하였다. 본 연구에서는 한국인 위팔뼈 72개(남자의 위팔뼈 66개, 여자의 위팔뼈 6개(왼쪽 위팔뼈 36개, 오른쪽 위팔뼈 36개))를 컴퓨터 단층촬영으로 얻은 2차원 단면 영상을 Mimics 11.11 (Materialise, Ann Arbor, MI)을 사용하여 3차원 모델로 재구성했고 이를 기반으로 위팔뼈의 계측학적 특징을 21개의 항목을 통해 살펴보있다. 이번 연구의 결과와 약 20년 전 자료의 결과를 비교하여 한국인 위팔뼈의 가로 직경(38.8±2.9㎜에서 40.8±3.6㎜)이 커졌다는 것을 알 수 있었다(p<0.05). 그리고 현 연구시점에서의 한국인 위팔뼈의 왼쪽과 오른쪽을 비교한 결과 통계적으로 유의한 차이가 없었다. (p>0.05). 한국인과 서양인 위팔뼈의 전체적인 크기를 비교한 경우에서는 위팔뼈머리의 기울기 각도, 큰결절 옆쪽의 오프셋 거리, 위팔뼈머리높이가 한국인이 더 크게 나타났다(p< 0.05). 본 논문에서는 한국인 위팔뼈의 계측학적 특징을 연구하였고 이를 통하여 한국인에게 적합한 인공보철물을 제작하는데 기여할 수 있을 것으로 기대된다. There were few studies about anatomic characteristics in Korean humerus recently. In addition, there was no comparison between Westerner (European and American) and Korean in anatomic characteristics of humerus. The aims of this paper are therefore to investigate anatomic characteristics in Korean humerus and to compare them with those of Westerner humerus. The seventy-two humerus (male: 66, female: 6) were scanned by computed tomography and three dimensional (3D) models of humerus were then reconstructed from acquired cross-section images. The twenty-one anatomic characteristics of the humerus were analyzed and were measured for each humerus. From the results, humeral head vertical diameter in the present study was generally bigger than that in the previous study (p<0.05). There was no significant difference between the anatomic characteristics of the right and left humerus in the present Korean (p>0.05). Humeral head inclination angle, greater tuberosity lateral offset distance, humeral head height in Korean were generally bigger than those in Westerner (p<0.05). This study may contribute to develop an optimal implants and prostheses for the treatment of humerus fractures of Koran.
낙상 시 하지 관절의 생체역학적 분석 및 IMU sensor와의 분석
최형인(Hyoung In Choi),홍재수(Jea Su Hong),전경진(Keyoung Jin Chun),고철웅(Cheol Woong Ko) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.2014 No.2
본 연구는 건강한 성인남성 2명을 대상으로 한 낙상 실험이다. 낙상 시 피험자의 4번째 요추와 5번째 요추 사이에 부착된 IMU sensor의 가속도 데이터와 Pelvic, Knee, Ankle의 각 관절의속도 데이터, 그리고 Rectus femoris, Vastus Lateralis, Tibialis anterior, Biceps femoris, Gastrocnemius의 하지부의 5가지 근육의 EMG 데이터를 측정하고, 분석 하였다. EMG 데이터는 근육의 MVC를 각각 측정하여 %MVC화하여 표준화 하였다. IMU 센서에서 측된된 가속도는 측정된 최대 가속도는 약 7g에서 13g 사이로 나타났다. 측정된 최소 가속도는 약 0.1g에서 0.6g 사이로 나타났다.
근력 측정을 통한 복합기능형 Lift 조향 손잡이의 최적설계에 관한 연구
조덕연(Deok Yeon Cho),전경진(Keyoung Jin Chun),고철웅(Cheol Woong Ko),김수택(Soo Taek Kim) 대한인간공학회 2010 대한인간공학회 학술대회논문집 Vol.2010 No.10
In this study, drivability tests of a multi-purpose lift combined with a variable handgrip test device were performed to get optimal design parameters of a lift handgrip. A Korean male in his 20s was selected for the tests and total 12 EMG sensors were used to measure muscle forces during the drivability tests. By changing the width (200㎜, 400㎜, 600㎜, and 800㎜) and the angle(0°, 45°, and 90°) of the lift handgrip, EMG data were measured and analyzed. From this study, it is considered that optimal design parameters of a lift handgrip were proposed to possibly improve lift drivability.
Chair System에 있어서 Seatback 각도에 따른 체압 및 근활성도 측정에 관한 연구
곽영찬(Yeong Chan Kwak),전경진(Keyoung Jin Chun),고철웅(Cheol Woong Ko),김수택(Soo Taek Kim),김종현(Jong Hyun Kim) 대한인간공학회 2010 대한인간공학회 학술대회논문집 Vol.2010 No.10
Sitting posture is common in daily life and approximate 75% of laborers usually work in sitting postures. Inappropriate sitting conditions for a long time could cause serious musculoskeletal disorders like lordosis, back pains. For this reason, studies on biomechanical and/or ergonomic features of human body are necessary for an optimal design process of chair system like chair, sofa, wheelchair, etc. In this Study, biomechanical tests to measure body pressure on seating area and muscle activities of human upper body by EMG sensors were performed to review optimal design parameters necessary for chair system development suitable for users.
한국인 사체 CT 영상에 기초한 대퇴골 골절치료용 금속판의 Concept Design
변태민(Tae-Min Byun),허신구(Shin-Goo Hur),황창윤(Chang-Yun Hwang),김남구(Nam-Gu Kim),강승백(Seung-Baek Kang),한상규(Sang-Kuy Han),고철웅(Cheol-Woong Ko) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
본 연구에서는 대퇴골 골절치료용 금속판 개발을 위하여 한국인 사체의CT 영상을 기초로 대퇴골 형상모델을 재구성하였으며, 형상계측학적 측정을 위하여 대퇴골 측정기준을 설정하였다. 특히, 대퇴골 Isthmus 기준위치를 설정하기 위하여 골수강의 단면형상을 측정하였고, 기준위치로부터 5mm 간격으 로 단면측정을 진행하였다. 한국인 대퇴골 간부 형상에 맞는 대퇴골절치료용 금속판의 Concept Design을 제안하였으며, 이를 기초로 향후 형상기억합금을 이용한 금속판 개발을 검토 예정이다.