http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한국인 사체 CT 영상에 기초한 대퇴골 골절치료용 금속판의 Concept Design
변태민(Tae-Min Byun),허신구(Shin-Goo Hur),황창윤(Chang-Yun Hwang),김남구(Nam-Gu Kim),강승백(Seung-Baek Kang),한상규(Sang-Kuy Han),고철웅(Cheol-Woong Ko) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
본 연구에서는 대퇴골 골절치료용 금속판 개발을 위하여 한국인 사체의CT 영상을 기초로 대퇴골 형상모델을 재구성하였으며, 형상계측학적 측정을 위하여 대퇴골 측정기준을 설정하였다. 특히, 대퇴골 Isthmus 기준위치를 설정하기 위하여 골수강의 단면형상을 측정하였고, 기준위치로부터 5mm 간격으 로 단면측정을 진행하였다. 한국인 대퇴골 간부 형상에 맞는 대퇴골절치료용 금속판의 Concept Design을 제안하였으며, 이를 기초로 향후 형상기억합금을 이용한 금속판 개발을 검토 예정이다.
형상기억합금 소재의 골절치료용 골고정재의 접촉압 시험에 관한 기초연구
변태민(Tae-Min Byun),고철웅(Cheol-Woong Ko),김남구(Nam-Gu Kim),임신혁(Sin-Hyouk Yim),허신구(Shin-Goo Hur),황창윤(Chang-Yun Hwang),강승백(Seung-Baik Kang) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.2014 No.2
본 연구에서는 대퇴골 골절치료용 형상기억합금 소재의 고정재 개발을 위하여 골고정재 접촉압 시험 장비를 개발하였다. 개발된 시험장비와 감압지를 이용하여 형상기억합금 소재의 골고정재(직경 25mm, 30mm)와 원형 지지봉(직경 40mm)이 접촉하였을 때 발생하는 접촉압을 측정하였다. 측정된 접촉압 분석 결과, 형상기억합금 소재의 골고정재의 온도 변화에 따른 접촉압 발생 거동을 확인하였고, 향후 생체시험용 Saw-bone을 적용하여 추가적인 접촉압 시험을 수행 예정이다.
가공열처리한 Ti-Ni-Cu 형상기억합금의 형상회복응력
하광수,남태현,조규봉,허신구 대한금속재료학회(대한금속학회) 1997 대한금속·재료학회지 Vol.35 No.3
Shape recovery stress of thermo-mechanically treated Ti-Ni and Ti-Ni-Cu shape memory alloys has been investigated by means of thermal cycling test under constant load and also and effect of thermo-mechanical treatment on transformation behaviour and transformation temperatures has been examined by means of electrical resistivity measurements, differential scanning calorimetry and X-ray diffraction. Transformation behaviour was not changed by thermo-mechanical treatments in Ti-Ni-Cu alloys, while it changed from B2(cubic)-B19'(monoclinic) to B2-R(rhombohedral)-B19' in the Ti-Ni alloy. Martensitic transformation start temperature increased silghtly by thermo-mechanical treatments in Ti-Ni-Cu alloys, while it decreased largely in the Ti-Ni alloy. Shape recovery stress of Ti-Ni-Cu alloys was larger than that of the Ti-Ni alloy. This was attributed to the fact that the maximum recoverable elongation of Ti-Ni-Cu alloys was larger than that of the Ti-Ni alloy. And also shape recovery stress depended of Cu-content. It increased from 290MPa to 400MPa with increasing Cu-content up to 5at%, and then decreased from 400MPa to 375MPa with increasing Cu-content from 5at% to 10at%.