http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
농산물 브랜드이미지가 브랜드신뢰 및 충성도에 미치는 영향 : 천안 '하늘그린'을 중심으로
강성필,양성범,김호,Kang, Seong-Pil,Yang, Sung-Bum,Kim, Ho 한국유기농업학회 2014 韓國有機農業學會誌 Vol.22 No.4
This study analyzed how the brand image elements influenced upon forming the brand trust and the brand loyalty of the 'Sky Green' the joint agricultural product brand Cheonan, Chungnam. The brand image was classified into functional image, symbolical image and origin - associated image. And what element of the brand image element influences upon forming the brand image loyalty by the consumers who are using 'Sky Green'. In the analysis results, the functional image, symbolical image and the image associated with the origin have influenced on forming the brand trust and the brand loyalty. All variables composing the brand image have positive influences on both brand trust and brand loyalty. It means that brand image influences on brand loyalty directly but the greater influence can be exerted through the effects of the parameter of brand trust.
방사무늬김 색소변이형 엽상체의 성장과 광합성의 색소함량
김용표(Young Pyo KIM),최성제(Sung Je CHOI),강성필(Sung Pil KANG),조용희(Young hi JO),신종암(Jong Ahm SHIN) 전남대학교 수산과학연구소 1998 수산과학연구소논문집 Vol.7 No.-
Comparative studies were made on growth and photosynthetic pigment contents of the gametothallus of the wild-type (U-511), the red-type (F6-1) and the green-type (C-01) in P. yezoensis. The mean gametothallus length of the green-type was lowest in the earlier growth period and was highest in the latter growth period. The mean relative growth rate per day was highest during the earlier growth period and became lower with age of gametothallus in all the three strains, and the differences among the strains were almost negligible during the period later than 28 days old. The mean contents of chlorophyll a, phycoerythrin and phycocyanin on a gametothallus area basis were highest in the red-type mutant. In the red-type mutant, the PE/Chl. a and the PE/PC ratios were highest and the PC/Chl. a ratio was similar to as that of the wild-type.
이온성 액체 이온성 액체를 사용한 하이드레이트 저해제 개발
김현택 ( Hyun Taek Kim ),김은성 ( Eun Sung Kim ),김기섭 ( Ki Sub Kim ),강성필 ( Seong Pil Kang ) 한국공업화학회 2013 공업화학전망 Vol.16 No.1
유전 및 가스전 개발 시 주변 환경의 온도와 압력 조건 혹은 펌프에 의한 가압으로 관내에는 저온, 고압의 조건이 형성된다. 이러한 조건하에 가스는 물에 포집되어 가스 하이드레이트를 형성하고, 결국 파이프라인을 막거나 심지어 파이프의 누수를 일으킨다. 이를 억제하기 위해 동역학적 저해제(Kinetic hydrate inhibitor, KHI)와 열역학적 저해제(Thermodynamic hydrate inhibitor, THI)가 사용되고 있지만 각기 지니고 있는 치명적인 단점 때문에 새로운 저해제 개발이 시급한 실정이다. 현재 독특한 물성으로 많은 연구가 진행되고 있는 이온성 액체(Ionic liquid, IL)는 기존 저해제의 단점을 보완할 뿐 아니라 하이드레이트 생성 억제에 있어 KHI와 THI의 특징을 모두 지니고 있는 새로운 하이드레이트 저해제로서 각광받고 있다. 본 고에서는 이온성 액체를 사용한 하이드레이트 저해제 개발과 관련한 최근 동향을 살펴보겠다.
이온성 액체를 이용한 메탄 하이드레이트 생성 촉진효과 연구
신주영 ( Ju Young Shin ),김기섭 ( Ki Sub Kim ),강성필 ( Seong Pil Kang ),문성용 ( Sung Yong Mun ) 한국화학공학회 2013 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.51 No.4
본 연구에서는 가스 하이드레이트 생성 시 첨가된 이온성 액체가 미치는 생성속도의 향상효과를 조사하였다. 이온성 액체로는 Hydroxyethyl-methyl-morpholinium chloride (HEMM-Cl)을 사용하였다. 메탄 하이드레이트의 상평형 곡선을 구하고 생성유도시간과 메탄가스의 소모량을 측정하였다. 20∼20,000 ppm의 HEMM-Cl을 준비하여 하이드레이트가 생성될 수 있는 70 bar, 274.15 K 조건에서 실험을 수행하였다. 하이드레이트 생성 속도에 대한 비교를 위해 순수한 물과 대표적인 촉진제인 sodium dodecyl sulfate를 같은 조건에서 실험하였다. 실험 결과, 이온성 액체인 HEMMCl은 상평형 곡선을 더 높은 압력과 낮은 온도 쪽으로 이동시켰다. 이온성 액체의 첨가 시에는 메탄 하이드레이트의 생성유도시간이 거의 나타나지 않는 것을 알 수 있었다. 메탄가스의 소모량은 모든 농도에서 향상되었고 1,000 ppm에서 가장 많은 양의 가스를 흡수하는 것으로 나타났다. 이온성 액체는 가스 하이드레이트 생성 촉진을 유도하는 것으로 나타났으며 가스저장, 수송 등의 응용기술 개발에 적용이 기대된다. In this study, we investigated the kinetics of gas hydrate formation in the presence of ionic liquid (IL). Hydroxyethyl-methyl-morpholinium chloride (HEMM-Cl) was chosen as a material for the promotion effect test. Phase equilibrium curve for CH4 hydrate with aqueous IL solution was obtained and its induction time and consumed amount of CH4 gas were also measured. Aqueous solutions containing 20∼20,000 ppm of HEMM-Cl was prepared and studied at 70 bar and 274.15 K. To compare the measured results to those of the conventional promoter, sodium dodecyl sulfate was also tested at the same condition. Result showed that the hydrate equilibrium curve was shifted toward higher pressure and lower temperature region. In addition, the induction time on CH4 hydrate formation in the presence of IL was not shown. The amount of consumed CH4 was increased with the whole range of tested concentration of IL and the highest consumption of CH4 happened at 1,000 ppm of HEMM-Cl. HEMM-Cl induced and enhanced the CH4 hydrate formation with a small amount of addition. Obtained result is expected to be applied for the development of technologies such as gas storage and transport using gas hydrates.
박정환(Jung Whan Park),정창욱(Chang Wook Jung),권용섭(Yong Seop Kwon),강성필(Sung Pil Kang) 대한기계학회 2016 大韓機械學會論文集A Vol.40 No.1
본 연구는 선박용 프로펠러 주물 생산을 위한 후란주형 설계 및 가공 시스템을 개발하였다. 대형 선박용 프로펠러는 시멘트 혹은 후란 소재로 상형 및 하형 주형을 제작하고, 주조를 통해 소재를 제작한다. 이후 주물소재에 대한 일련의 기계가공 및 사상을 거쳐 제품을 완성한다. 기존 후란주형은 수작업을 통한 조형을 통해 제작되므로 세부 공정이 많아질뿐더러, 상당한 소재여유가 존재함으로써 기계가공 및 사상 공수가 증가한다. 이에 따라 후란주형의 제작 정밀도를 향상하고, 생산과정의 표준화 및 생산성 향상을 위해 설계 소프트웨어 및 6축 로봇을 이용한 후란주형 제작 시스템을 개발하였다. A furan mold design and machining system for marine propeller casting was developed. In general, a large marine propeller is produced by casting in a foundry, where the upper and lower molds are constructed of cement or other materials like furan. Then, the cast workpiece is machined and manually ground. Currently, furan mold construction requires a series of manual tasks. This introduces a fairly large amount of stock allowances, which require a considerable number of man-hours for later machining and grinding, and also increase the work processes. A mold design and off-line robot programming software tool with a six-axis robot hardware system was developed to enhance the shape accuracy and productivity. This system will be applied in a Korean ship building company.