http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
배전용 변압기의 과부하상태를 고려한 수배전반 안전 알고리즘에 관한 연구
추철민(Chu Cheol-Min),김재철(Kim Jae-Chul),강봉석(Kang Bong-Suk),류승기(Seung-Ki Ryu) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.7
In this paper, an experiment result on overload of distribution transformer was arranged by top oil temperature depending on capacity and time. This result shows the definition on overload of transformer is different by some factors such as ambient temperature and immediate load. In other words, increased temperature in range of regulation(50K) has time to spare even if the condition of transformer is overload. The algorithm presented in this paper is based on the international standard (IEEE std C57.91), and the safety of switchboard is diagnosed by this aspect mentioned on overload of transformer.
구강점막 부착용 케토프로펜 고분자 필름의 제조 및 평가
박진석,이상은,강봉석,이경록,이은주,박정숙 충남대학교 약학대학 의약품개발연구소 2014 藥學論文集 Vol.29 No.-
Abstract – The objective of this study was to prepare ketoprofen-loaded buccal adhesive patch. The adhesive patch was formulated by casting method using aqueous soluble polymer povidone K17 (PVP 17PF) as film-forming agent and hydroxypropylmethylcellulose (HPMC) as adhesive agent. To compare the effect of HPMC type, different molecular weight of K4M and K15M HPMC was used. The physicochemical properties of patches such as appearance, thickness, in vitro release, and adhesiveness were investigated. The concentration of ketoprofen was determined spectrophotometrically at a wavelength of 233 nm. The appearance of prepared patches was semi-transparent, light-yellow or almost colorless, and odorless. Thickness of each patches (n=6) was 0.895 ± 0.033 mm for K4M patch and 0.727 ± 0.036 mm for K15M patch. In vitro release test, both K4M and K15M patches showed over 20% release within 30 min. At 120 min, K4M and K15M patches demonstrated 95% and 67.5% release of ketoprofen, respectively, and up to 240 min, both patches released drug completely. Maximum adhesive force of K4M and K15M patches was 6.571 ± 2.703 gf and 2.735 ± 1.151 gf, respectively. Moreover, it took 28.29 ± 0.38 sec and 28.30 ± 0.34 sec for K4M and K15M patch to peel off them after adhesion, showing no significant difference. In conclusion, thickness, in vitro release, and maximum adhesive force could be modulated by alteration of polymer types.
강계원,김대연,이영훈,강봉석,박정현,최병호 금오공과대학교 산업기술개발연구원 2000 産業技術開發硏究 Vol.16 No.-
AC powder electroluminescence(EL) device consists of seven layers : PET substrate, transparent electrode, phosphor layer, dielectric layer, two layer metal electrodes and protective layer. Etch layer needs to control to improve electrical and optical properties. Both phosphor and dielectric layer among them is more important to increase its properties. For long-time reliability, proper choices of passivation and sealing material are essential. In this paper, influence of phosphor and dielectric layer thickness on EL performance is studied. Type of cellulos is selected as a sealing material to avoid moisture. To add two type of plasticizer to resin improves flexibility and passivation of EL devices. Through this experiments, technologies of fabrication low-cost thick film EL device can be established.