http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고해상도 레이더용 광대역 디지털 첩 펄스 발생기 실험모델 개발
강경인(Kyungin Kang),전재한(Jaehan Jeon),신희섭(Heesub Shin),임종태(Jongtae Lim) 한국항공우주학회 2006 韓國航空宇宙學會誌 Vol.34 No.8
항공기나 위성에 탑재되어 지표면의 영상을 획득하기 위한 합성 개구 레이더의 영상 분해능은 거리 방향 분해능(Range Resolution)과 이에 수직한 방향의 분해능(Azimuth Resolution)으로 구분할 수 있다. 레이더 센서를 이용한 영상의 해상도를 향상시키기 위해서는 신호처리를 위한 첩 펄스를 광대역화 할 필요가 있으며, 본 논문에서는 고해상도의 영상을 획득 할 수 있는 디지털 첩 펄스 발생기를 설계하였다. 디지털 첩 펄스 발생기는 크게 AWG방식과 DDS방식으로 구분할 수 있으며 본 연구에서는 DDS방식의 첩 펄스 발생기로 선형 주파수 변조(LFM) 파를 발생시키는 300㎒ 대역의 광대역 디지털 첩 펄스 발생기를 개발하였다. 개발된 첩 펄스 발생기는 거리 방향 분해능이 50㎝ 이상 되는 고 해상도 영상 레이더 시스템을 구현할 수 있는 성능을 가진다. There are range and azimuth direction resolution of synthetic aperture radar on the aircraft or satellite. Wide bandwidth chirp pulse generation technology is prerequisite for SAR image with fine resolution. There are two kinds of digital chirp pulse generation technology as arbitrary waveform generator(AWG) and direct digital synthesizer(DDS). In this paper, we design and implement a digital chirp pulse generator to generate 300㎒ wide bandwidth linear FM chirp pulse for the fine resolution image with direct digital synthesizer. Implemented chirp pulse generator can be useful for the SAR sensors to make 50㎝ range resolution image.
우리별 위성 포획 임무 수행을 위한 소형위성의 궤도 천이 방법 및 분석
이준찬,강경인,Junchan Lee,Kyungin Kang 한국우주과학회 2023 우주기술과 응용 Vol.3 No.2
Active debris removal, a technology that approaches and removes space debris in orbit, and the on-orbit service, a technology for extending the mission life of satellites by fuel charging or by exchanging the battery, are gaining interest with the growth of the space community. SaTReC plans to develop a satellite capable of capturing and removing Korean satellites orbiting in space after the end of their missions. In contrast to the previously launched satellites by Korea, which were mainly intended to observe Earth and the space environment, rendezvous/docking technologies, as required in the future during, for instance, space exploration missions, will be implemented and demonstrated. In this paper, an orbital transition method for next-generation small satellites that will capture and remove space debris will be introduced. It is assumed that a small satellite with a mass of approximately 200 kg will be injected into the mission orbit through Korea Space Launch Vehicle-II in 2027. Because the satellite must access the target using a minimum amount of fuel, an approaching technology using Earth's J2 perturbation force has been developed. This method is expected to enable space debris removal missions for relatively lightweight satellites and to serve as the basis for carrying out a new type of space exploration in what is termed the 'Newspace' era.
과학기술위성 2호 Reaction Wheel Assembly Interface Unit Proto Flight Model 개발
김세일(Saeil Kim),이성호(Sung-ho Rhee),강경인(Kyungin Kang) 한국항공우주학회 2006 韓國航空宇宙學會誌 Vol.34 No.5
과학기술위성 2호 사용되는 구동기인 반작용 휠(Reaction Wheel Assembly, RWA)과 위성 시스템을 연결해주는 인터페이스를 담당하는 Reaction Wheel Assembly Interface Unit(RIU)의 Proto Flight Model의 개발이 완료되고 동작시험을 마쳤다. RIU는 RWA에 공급되는 전원을 켜고 끄는 스위치와 명령을 주고 받는 위성탑재 컴퓨터(OBC)의 통신회선을 선택하는 멀티플렉서, 그리고 RWA에 연결되는 물리적 통신라인으로 구성된다. Proto Flight Model of Reaction Wheel Assembly Interface Unit(RIU) for STSAT-2 was developed. The RIU of STSAT2 has three major functions for interface between satellite system and RWAs. It has switches for RWA main power, communication Mux. and communication line driver.
우주개발사업의 효율적인 관리를 위한 PM기법 적용사례와 현황
김성백(SeongBaek Kim),조성호(SeongHo Cho),권은화(EunHwa Kwon),김창민(ChangMin Kim),강경인(KyungIn Kang),박희웅(HeeWoong Park) 한국항공우주학회 2020 한국항공우주학회 학술발표회 논문집 Vol.2020 No.11
우주 기술개발사업은 장기간 동안 막대한 개발 예산이 소요되는 사업으로 이에 대한 일정과 예산을 효율적으로 관리 및 추적하기 위한 방안에 대해 지속적으로 관심이 가중되고 있음. 국내외 해외의 주요 대형 사업과 시스템개발 측면의 사업에서도 전주기적 시점의 사업 관리 및 점검 프로세스가 마련되어 개발 단계별로 연구개발 성과를 점검하여 다음 단계로 통과 여부를 확정하는 PM기법이 적용되고 있다. 연구재단 소관 사업에서도 사업의 체계적인 관리를 통해 사업 일정과 예산을 준수하여 사업 목적 달성도에 기여하고자 PM기법을 일부사업에 시범 적용하고 있음. PM기법이 도입되기 전에는 기존의 연구책임자가 제출한 연차실적 계획서 중심의 매 연도별 연차평가를 통한 사후적 처방 중심의 수동적 관리가 되었음. 이를 개선하기 위해 PM 기법 도입을 통해 시범사업에서는 사업 초기부터 설정된 주요 목표 및 성과 중심으로 관리하기 위해 연구자가 직접 성과물 기반으로 제출한 작업분류(WBS) 및 Activity 정의, 일정 및 예산의 세분화를 통한 주요 사업별 핵심 성과(Benefit/Performance) 중심의 관리가 가능할 것으로 예상된다. 우주분야 등에서 추진된 프로젝트경영(PM) 기법 적용된 내역들의 분석을 통해 추진 성과의 장점을 확대하고 주요 사업별로 (자체) 프로세스 정립하여 향후 대형사업 등에서 발생할 수 있는 RISK 및 현안 이슈에 충분히 대응할 수 있는 체계가 수립될 것으로 예상된다. 특히 현장중심의 연구자 의견 수렴을 통해 PM 적용 확산을 위한 프로젝트 Planning 프로세스 정립을 통해 목표달성도 제고 및 성과창출형 R&D PM기법을 제시한데 본 논문의 의미가 있다.
소형위성 전용발사체를 활용한 우주검증 서비스 및 그 가치
임석희(Seokhee Lim),박정호(JungHo Park),이기주(Keejoo Lee),강경인(Kyungin Kang) 한국추진공학회 2018 한국추진공학회 학술대회논문집 Vol.2018 No.12
최근 전 세계 소형위성발사 수요는 지난 5년간 6배 증가하였다. 여기서 논하는 소형위성은 500kg 이하를 뜻한다. 소형위성발사 수요 증가의 주요 요인은 다양한 큐브위성의 개발, 해외경쟁력을 갖추기 위한 우주부품 및 우주 신기술의 국산화, 위성 무게와 크기의 축소, 소형정찰위성 수요 대두 등이다. 현재 소형위성 발사는 기존 발사체를 이용한 함께타기(rideshare) 서비스를 활용하고 있지만, 이미 수요가 공급을 앞지르는 상황이다. 향후 이 수요는 점차 전용발사서비스로 옮겨갈 것으로 예측된다. 2018년 11월 28일 누리호의 시험발사체 비행시험으로 우리나라도 소형위성 발사서비스에 대응할 수 있는 소형발사체의 가능성을 확인할 수 있었다. 본 논문에서는 궤도상에서 우주부품 또는 우주신기술을 검증하는 In-Orbit Demonstration(IOD)의 필요성과 소형위성을 활용한 IOD의 가치를 살펴보았다. Demand for SmallSat Launches has increased 6 times over the past 5 years. The SmallSat discussed here means less than 500kg. The main factors of the SmallSat Launch demand are development of various Cube Sat., the manufacturing space components in Korea for overseas competitiveness, space new technology research for space development, reduction of satellites mass and size and demand for small reconnaissance satellites. Currently SmallSat are launched by rideshare using the existing launchers. But demand is outpacing supply. And also this demand is expected to gradually shift to dedicated launch service in the near future. By Nov. 28, 2018, from the flight test of KSLV-II TLV, we could confirm the possibility of Small Launch vehicle configuration that can respond to SmallSat launch services. In this paper, we 000 the necessity of In-Orbit Demonstration(IOD) to verify space components and new technology and the values of IOD using SmallSat launch.
지자기 폭풍 연구를 위한 20~400 keV 대역의 플라즈마 입자 검출기
서용명(Yongmyung Seo),윤세영(Seyoung Yoon),우주(Ju Woo),설우형(Woohyung Seol),이채안(Chaean Lee),이찬행(Chanhaeng Lee),선종호(Jongho Seon),손종대(Jongdae Sohn),민경욱(Kyoungwook Min),강경인(Kyungin Kang),신구환(Goohwan Shin),채장수(Jan 한국항공우주학회 2016 한국항공우주학회 학술발표회 논문집 Vol.2016 No.4
경희대학교가 제작한 중에너지 입자 검출기(Medium Energy Particle Detector, MEPD)는 우주폭풍 연구에 필요한 물리량 획득을 위한 과학 탑재체(Instrument for the Study of Space Strom, ISSS)중 20~400 keV 대역의 전자, 양성자 및 중성 입자를 6.25 keV 와 1 sec ~ 10 msec의 에너지 및 시간 분해능으로 검출한다. 본 검출기는 지자기 폭풍 발생 시 급격히 증가하는 대전 입자들을 정전 편향기(electrostatic deflector)와 감쇄기가 적용된 망원경 2대의 수직 배치를 통하여, 데이터 오염과 전장부 포화를 방지하고 예상되는pitch angle에 따라 입자의 종류 및 에너지를 구분 검출 하도록 제작 되었다. 해당 탑재체의 위성 본체는 한국과학기술원 인공위성연구센터가 개발 중인 차세대 소형위성 1호 (Next Generation Small Satellite-1, NEXTSat-1) 이며, 2017년 발사 예정이다. Measurement of energies and fluxes for the charged particles and neutral is required for research of space storms. The measurement requires a careful calibration of the instrument to detect significantly varying fluxes of those particles relative to the occurrence of geomagnetic storms without saturation or loss of information on the mission orbit. The Medium Energy Particle Detector (MEPD) will have an energy range from 20~400 keV and resolution 6.25 keV with orthogonal field-of-views of two telescopes for the detection of charged particles in terms of different pitch angles. The MEPD is one of a subset instrument within the Instrument for the Study of Space Strom (ISSS) which contains both space radiation detectors and space plasma instruments. The ISSS is developed to measure space storms in low altitude polar orbits and will be aboard the Next Generation Small Satellite-1 (NEXTSat-1) scheduled for launch in 2017.