http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김정택,백경갑,주성후,Kim, Jung-Taek,Paek, Kyeong-Kap,Ju, Sung-Hoo 한국전기전자재료학회 2009 전기전자재료학회논문지 Vol.22 No.11
The characteristics of organic films can be affected by the temperature of evaporation source because the temperature of evaporation source has an effect on substrate temperature during OLED fabrication process using the thermal evaporation. To investigate the characteristics of OLED devices fabricated by using thermally damaged organic films, I-V-L and half life-time in OLED devices fabricated with various substrate temperatures were measured. During emission layer(EML) evaporation, OLED devices with a structure of ITO(100 nm)/ELM200(50 nm)/NPB(30 nm)/$Alq_3$(55 nm)/LiF(0.7 nm)/Al(100 nm) were fabricated at various substrate temperatures(room temperature, $30^{\circ}C$, $40^{\circ}C$, and $50^{\circ}C$). The characteristics of current density and luminance versus applied voltage in OLED devices fabricated shows that many electrical currents flowed and high brightness appeared at low voltage, but that the lifetime of OLED devices dropped suddenly. This phenomenon explained that the crystallization of $Alq_3$ thin film appeared owing to the substrate heating during evaporation.
선택적인 CPS 변환에 의한 ML의 예외상황 실행속도의 개선
김정택(Jung-Taek Kim),이광근(Kwangkeun Yi) 한국정보과학회 1999 한국정보과학회 학술발표논문집 Vol.26 No.1A
ML의 예외상황 처리부분을 사용함으로서 프로그래머는 쉽게 자신의 프로그램의 예외적인 동작을 기술할 수 있지만, 이러한 예외상황을 처리하는 프로그램 부분이 병목 현상을 일으키는 경우가 많다. 이 논문에서는 프로그램내에서 예외상황 처리부분을 없애는데 꼭 필요한 표현만을 정적분석을 사용해서 골라내어 이를 선택적으로 수정된 “나중에 할일을 넘겨주는 방식(Continuation Passing Style)”으로 변환하는 방법을 정확히 기술하고, 이 변환이 옮음을 증명하고, 마지막으로 초기 단계의 실험결과를 제시한다.
김정택(Jeongtaek Gim),김태영(Taeyoung Kim) 한국컴퓨터교육학회 2021 한국컴퓨터교육학회 학술발표대회논문집 Vol.25 No.2(A)
최근 전 세계의 인공지능 관심이 높아지고 있는 상황에서 현재 사회는 산업과 사회, 인간의 삶 전반에 걸쳐 거대한 패러다임 변화를 맞이하고 있다. 한국 또한 시대의 흐름에 맞춰 사회 전반적인 인프라를 구축하고 SW 교육을 중심으로 학생들의 창의적이고 효율적인 문제 해결력을 요구하고 있다. 따라서 본 연구에서는 컴퓨팅 사고력을 기초소양으로 SW 교육에서 리빙랩 프로세스를 적용하여 실생활의 문제를 창의적이고 효과적으로 해결하는 교수 · 학습 방법을 개발하고자 한다. ADDIE 모형을 기반으로 학교 현장에 적용하기 위해 개발된 리빙랩 모델을 사용하여 SW의 기초와 원리를 배우고 창의적이고 효율적인 문제 해결을 하는 법을 배우도록 학습 내용을 구성하였다. 또한 창의적인 문제 해결력과 컴퓨팅 사고력을 증진하기 위해 CT-CPS 모델을 적용하여 문제해결 과정을 구성하였다. 본 연구에서 리빙랩 프로세스 기반의 SW 교육 프로그램은 새로운 사회에서 요구하는 창의적이고 효율적인 문제 해결력을 키울 수 있는 교수 학습 방법을 제안하고 탐색했다는 점에서 의의가 있다.
김정택(Jungtaek Kim),김철(Cheol Kim),송태성(Taeseong Song),박철우(Chulwoo Park) 한국자동차공학회 2004 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
The optimum shape of an automotive pedal arm is obtained using the FEM-based shape optimization software. Most pedal arms are in the form of three-dimensionally curved shape with uniform thickness. The vertical force of 294 N and side force of98 N are applied to the pedal as the design load and displacement constraint is 2.5 ㎜. After intensive 3-D design shape optimization, maximum 32.1 % weight of the pedal arm can be saved from the currently applied pedals in use. In addition, attaching a rib to the side of the arm is known to be an efficient way of increasing its stiffness by analyses in this study. The rib can be easily made on the arm by a press process. The judicious choice of sizes and locations of the rib can significantly improve the stiffness of a pedal arm and may contribute to the optimum design.