http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
백서의 두개골 결손부에서 탈단백우골 이식 시 흡수성악의 효과
박영준,최근호,장정록,정승곤,김영준,유민기,국민석,오희균,유선열,박홍주,Park, Young-Jun,Choi, Guen-Ho,Jang, Jung-Rok,Jung, Seung-Gon,Kim, Young-Joon,Yu, Min-Gi,Kook, Min-Suk,Oh, Hee-Kyun,Ryu, Sun-Youl,Park, Hong-Ju 대한악안면성형재건외과학회 2009 Maxillofacial Plastic Reconstructive Surgery Vol.31 No.5
Purpose : This research evaluates the effect of the use of absorbable membrane barrier with deproteinized bovine bone (Bio-$Oss^{(R)}$, Switzerland) on bone healing in surgically created critical-sized defects in rat calvaria. Materials and Methods : Two standardized transosseous circular calvarial defects (5 mm in diameter) are made in each calvarium of 30 rats. These rats are divided into negative control group(n=15), positive control group(n=15) and two experimental groups(n=15). In the negative control group, defects are only filled with blood clots. In the positive control group, defects are filled with autogenous bone obtained from calvarium; in the experimental group 1, defects are filled with deproteinized bovine bone; and in the experimental group 2, defects are filled with deproteinized bovine bone with absorbable membrane. At the postoperative 1 week, 3 weeks. and 6 weeks, clinical. histologic and histomorphometric evaluations of the defects are performed. Results : 1. The grafted bone without membrane in the calvarial bone defect was scattered but, the grafted bone with membrane was stable. 2. $BioMesh^{(R)}$ membrane was absorbed beginning at 3 weeks, and was absorbed considerably at 6 weeks while maintaining the structural form of the membrane. 3. The use of membrane blocked soft tissue invasion. 4. In histomorphometric analysis. it showed the greatest amount of new bone formation in the positive control group. The amount of new bone formation was greater in the experimental group 2 than experimental group 1. At 6 weeks. the amount of new bone formation was greater in the positive control group than experimental group l(p<0.005). Conclusion : These results suggest that membrane increase the stability of grafted bone and protects from soft tissue invasion, and the use of the membrane may promote new bone formation in deproteinized bovine bone graft area.
웹 서비스 동적 연동을 위한 클라이언트 에이전트 프레임워크
박영준,이우진,Park, Young-Joon,Lee, Woo-Jin 한국정보처리학회 2009 정보처리학회논문지 A Vol.16 No.5
일반적으로 웹 서비스에 접속하기 위해서는 .NET 또는 자바 런타임 등의 무거운 프레임워크를 사용하여야 한다. 이러한 프레임워크들은 기본적으로 PC 급 이상의 리소스를 가진 경우에 사용할 수 있으므로 센서 노드와 같이 제한적인 리소스를 가진 경우에는 웹 서비스를 사용할 수 없다. 이 논문에서는 이러한 클라이언트 노드에서 웹 서비스를 사용할 수 있는 클라이언트 에이전트 프레임워크를 제안한다. 클라이언트 에이전트 프레임워크는 충분한 리소스를 가진 제 3의 서버에서 관리되며, 실제 클라이언트 노드는 에이전트 서버에 접속하여 해당 클라이언트 에이전트의 웹 서비스 연동 기능을 이용한다. 클라이언트 에이전트는 클라이언트 요청 시에 WDSL 정보를 활용하여 동적으로 생성된다. 이러한 웹 서비스 연동 방법을 이용하면, 센서 노드나 모바일 단말에서 최소의 리소스로 웹 서비스를 연동할 수 있으므로 다양한 유형의 서비스를 구현할 수 있다. In order to connect web services, clients generally should use heavy frameworks such as .Net framework and Java run-time environment, which require high performance hardware resources like a personal computer. Therefore, it is impossible for sensor nodes to handle web services due to their limited resources. In this paper, a client agent framework is proposed for dynamically connecting web services in the client node with limited resources. A client agent, which is managed by the framework in other server, has full capability for connecting web services, while a real client has a simple connection module with the client agent. In this framework, a client agent is dynamically generated using the WSDL in the web service server. By using the framework, sensor nodes or mobile devices can enhance their functionalities and services by accessing web services with minimum resources.
박영준(Young-Joon Park) 한국기업법학회 2015 企業法硏究 Vol.29 No.4
주식회사처럼 투자자들이 유한책임을 부담하면서 소규모 사업을 행할 수 있도록 하기 위해 독일의 법학자들은 19세기말 유한회사(GmbH)제도를 고안해 입법하였다. 유한회사 제도의 실무상 장점에 주목하여 이 제도는 미국 회사법제에 유한책임회사(Limited Liability Company: LLC)라는 명칭으로 그 내용이 변형되어 1977년에 도입되었고, 20세기말부터 오늘까지 미국의 창업열풍에 크게 기여했다고 평가되고 있다. 미국의 LLC제도는 합동회사라는 명칭으로 2005년 일본 회사법에 도입되었고, 우리나라에도 2011년 개정 상법에 유한책임회사라는 명칭으로 도입되었다. 다만 우리나라에서는 이 제도의 원형인 독일 유한회사(GmbH)제도에 해당하는 유한회사 제도가 그대로 존재하기 때문에 양 회사제도의 독자성 및 차별성에 관한 의문이 많이 제기되고 있다. 본고에서는 먼저 상법상 유한책임회사 제도에 강한 영향을 끼친 독일 유한회사(GmbH), 미국 LLC, 일본 합동회사 제도의 구체적인 내용에 대하여 비교법적으로 자세하게 알아본 후 현행 우리 유한책임회사 제도가 가지고 있는 현실적인 문제점과 이에 대한 구체적인 개선방안을 제시하고 있다. In the late 19th century, German jurist designed “Gesellschaft mit beschränkter Haftung”(GmbH: Company with limited liability) which is a company system for small business with owner’s limited liability for the company’s debts. This type of company has become the most common company form in Germany. In 1977, Wyoming state of USA enacted the Limited Liability Company Act, based on the same social needs of Germany. A Limited Liability Company(LLC) is a business structure that combines the self management of a partnership with the limited liability of a corporation. At the end of the 20th century, it has become the most popular business entity in USA. In 2005, Japan passed legislation creating a Limited Liability Company(“godo kaisha”), a close variant of the American LLC. In 2011, a Limited Liability Company based on the American LLC were introduced as a new company system in the Korean Commercial Code. New Limited Liability Company is very similar with the existing Limited Company based on the German GmbH, so there is arguments for differences of both company systems. In this paper, the author examines the Korean Limited Liability Company compare with German GmbH, American LLC(on Revised Uniform Limited Liability Company Act[RULLCA]) and Japanese LLC(“godo kaisha”). And the author suggests some revision of the Korean Commercial Code and the Korean Corporate Income Tax Act, especially to adopt pass-through taxation (partnership tax treatment) to enhance the utilization of the Limited Liability Company.
폴리비닐실록산 치과용 고무인상재의 친수성 향상을 위한 계면활성제의 응용과 물성에 미치는 영향
박영준 ( Yeong Joon Park ),황문진 ( Moon Jin Hwang ),김민강 ( Min Kang Kim ),송호준 ( Ho Jun Song ),하광 ( Kwang Ha ),강신영 ( Shin Young Kang ) 한국고무학회 2008 엘라스토머 및 콤포지트 Vol.43 No.2
This study was purposed to investigate the effects of surfactants and fillers on physical properties of hydrophilic polyvinylsiloxane dental impression materials (PVS). Incorporation of surfactants enhanced the hydrophilicity of the PVS, however, it induced increased viscosity and permanent deformation ratio, delayed setting, and decreased tensile strength. At high concentrations of surfactant, the tensile strength was observed to decrease significantly due to the internal pore formation. Especially, the hydrophilicity of the PVS was significantly enhanced with the addition of Silwet L-77. However, the viscosity, strain in compression, pore formation, and setting time increased whereas the elastic recovery rate and strength remarkably decreased. The PVS dental materials containing Span 20 showed the lowest degree of viscosity increase, delayed setting, pore formation, and hydrophilicity. The delayed setting, pore formation, and strength decrease caused by the incorporation of surfactant were improved by substituting the crystalline quartz filler with diatomaceous earth while the contact angle of PVS dental materials increased.
박영준 ( Young Joon Park ),이우진 ( Woo Jin Lee ) 한국정보처리학회 2008 한국정보처리학회 학술대회논문집 Vol.15 No.1
현재 클라이언트가 웹 서비스를 이용하기 위해서는 고사양의 CPU, 메모리 등의 빠른 속도를 지원하는 통신 인터페이스가 필요하다. 하지만 초소형 센서 노드와 같이 제한적인 리소스를 가진 클라이언트에서는 웹 서비스 프레임워크를 탑재할 만한 리소스가 없다. 본 논문에서는 제한된 자원을 갖는 클라이언트가 웹 서비스를 사용할 수 있도록 연결하는 클라이언트 에이전트를 제안한다. 클라이언트 에이전트는 실제 클라이언트가 요청한 웹 서비스에 따라 웹 서비스를 연동하는 코드를 동적으로 자동 생성한다. 또한 웹 서비스 서버와 통신하는 SOAP 메시지를 클라이언트 응용 통신 메시지로 상호 변환하는 기능을 제공하고 클라이언트의 근거리 저속 통신 인터페이스를 고려한다.