교정장치로부터의 니켈과 크롬의 유리에 관한 연구

류정현,오소택,강경화,김상철 대한치과교정학회 2003 대한치과교정학회지 Vol.33 No.5

니켈과 크롬은 대부분의 교정장치를 제작하는데 사용되는 합금을 구성하는 주요한 금속이다. 그러나 이들 금속은 과민반응, 피부염, 천식 등의 주요한 원인이 되며, 이들 금속의 우발적인 흡입에 의해 암이 유발될 수 있음이 보고된바 있다. 이에 하악 standard edgewise 브라켓을 이용한 사분악의 교정 장치를 37℃, 0.05% NaCl 용액에 저장하여 교정장치의 부식에 의해 유리된 니켈과 크롬을 Inductively Coupled Plasma(ICP) spectroanalyzer를 이용하여 측정하였다. 교정장치로부터, 1일 평균 9.83-70.0㎍/day의 니켈이 유리되었으나, 크롬은 10ppb 측정한계에서 측정불가능 하였다. 니켈 유리량은 제품에 따라 유의한 차이를 가져왔다. Galvanic 조건이나 Sand blasting 처리는 니켈 유리량에 증가를 가져왔으나 통계학적으로 유의하지 않았다. Nickel and chromium are two major metals used in the alloys of most orthodontic appliances. But these metals arc known to cause hypersensitivity, dermatitis, and asthma. In addition, a significant carcinogenic and mutagenic potential has been demonstrated for compounds containing these metals. The purpose of this study was to find out how much nickel and chromium was released from orthodontic appliances, and which factors would influence the release. The simulated orthodontic appliances were constructed for a half of a mandibular arch and incubated in 0.05% NaCl solution at 37℃. Nickel and chromium release was quantified with an Inductively Coupled Plasma (ICP) spectroanalyzer. The results were as follows 1. From simulated orthodontic appliances, nickel was released 9.83-70.0㎍/day but the release of chromium was not detectable in limit of l0ppb. 2. The amount of nickel release was significantly different between the types of appliances. 3. The galvanic condition increased the amount of nickel release, which was not statistically significant. 4. The sand blasting increased the amount of nickel release, which was also not statistically significant.

백색금 합금용 모합금의 실리콘 함량에 따른 물성변화

송정호,노윤영,이현우,최민경,송오성,Song, Jeongho,Noh, Yunyoung,Lee, Hyeonwoo,Choi, Minkyoung,Song, Ohsung 한국재료학회 2015 한국재료학회지 Vol.25 No.2

We prepared 8 samples of non-silver and silver-added master alloys containing silicon to confirm the existence of nickel-silicides. We then prepared products made of 14K and 18K white gold by using the prepared master alloys containing 0.25, 0.35, and 0.50 wt% silicon to check for nickel release. We then employed the EN 1811 testing standard to investigate the nickel release of the white gold products, and we also confirmed the color of the white gold products with an UV-VIS-NIR-color meter. We observed $NiSi_x$ residue in all master alloys containing more than 0.50 wt% Si with EDS-nitric acid etching. For the white gold products, we could not confirm the existence of $NiSi_x$ through XRD after aqua-regia etching. In the EN 1811 test, only the white gold products with 0.25 wt% silicon master alloys successfully passed the nickel release regulations. Moreover, we confirmed that our white gold products showed excellent Lab indices as compared to those of commercial white gold ones, and the silver-added master alloys offered a larger L index. Our results indicate that employing 0.25 wt% silicon master alloys might be suitable for white gold products without nickel-silicide defects and nickel release problems.

Evaluation of effect of galvanic corrosion between nickel-chromium metal and titanium on ion release and cell toxicity

이정진,송광엽,안승근,최정윤,서재민,박주미 대한치과보철학회 2015 The Journal of Advanced Prosthodontics Vol.7 No.2

PURPOSE. The purpose of this study was to evaluate cell toxicity due to ion release caused by galvanic corrosion as a result of contact between base metal and titanium. MATERIALS AND METHODS. It was hypothesized that Nickel (Ni)-Chromium (Cr) alloys with different compositions possess different corrosion resistances when contacted with titanium abutment, and therefore in this study, specimens (10×10×1.5 mm) were fabricated using commercial pure titanium and 3 different types of Ni-Cr alloys (T3, Tilite, Bella bond plus) commonly used for metal ceramic restorations. The specimens were divided into 6 groups according to the composition of Ni-Cr alloy and contact with titanium. The experimental groups were in direct contact with titanium and the control groups were not. After the samples were immersed in the culture medium - Dulbecco’s modified Eagle’s medium[DMEM] for 48 hours, the released metal ions were detected using inductively coupled plasma mass spectrometer (ICP-MS) and analyzed by the Kruskal-Wallis and Mann-Whitney test (P<.05). Mouse L-929 fibroblast cells were used for cell toxicity evaluation. The cell toxicity of specimens was measured by the 3-{4,5-dimethylthiazol-2yl}-2,5-diphenyltetrazolium bromide (MTT) test. Results of MTT assay were statistically analyzed by the two-way ANOVA test (P<.05). Post-hoc multiple comparisons were conducted using Tukey’s tests. RESULTS. The amount of metal ions released by galvanic corrosion due to contact between the base metal alloy and titanium was increased in all of the specimens. In the cytotoxicity test, the two-way ANOVA showed a significant effect of the alloy type and galvanic corrosion for cytotoxicity (P<.001). The relative cell growth rate (RGR) was decreased further on the groups in contact with titanium (P<.05). CONCLUSION. The release of metal ions was increased by galvanic corrosion due to contact between base metal and titanium, and it can cause adverse effects on the tissue around the implant by inducing cytotoxicity.

Evaluation of effect of galvanic corrosion between nickel-chromium metal and titanium on ion release and cell toxicity

Lee, Jung-Jin,Song, Kwang-Yeob,Ahn, Seung-Geun,Choi, Jung-Yun,Seo, Jae-Min,Park, Ju-Mi The Korean Academy of Prosthodonitics 2015 The Journal of Advanced Prosthodontics Vol.7 No.2

PURPOSE. The purpose of this study was to evaluate cell toxicity due to ion release caused by galvanic corrosion as a result of contact between base metal and titanium. MATERIALS AND METHODS. It was hypothesized that Nickel (Ni)-Chromium (Cr) alloys with different compositions possess different corrosion resistances when contacted with titanium abutment, and therefore in this study, specimens ($10{\times}10{\times}1.5mm$) were fabricated using commercial pure titanium and 3 different types of Ni-Cr alloys (T3, Tilite, Bella bond plus) commonly used for metal ceramic restorations. The specimens were divided into 6 groups according to the composition of Ni-Cr alloy and contact with titanium. The experimental groups were in direct contact with titanium and the control groups were not. After the samples were immersed in the culture medium - Dulbecco's modified Eagle's medium[DMEM] for 48 hours, the released metal ions were detected using inductively coupled plasma mass spectrometer (ICP-MS) and analyzed by the Kruskal-Wallis and Mann-Whitney test (P<.05). Mouse L-929 fibroblast cells were used for cell toxicity evaluation. The cell toxicity of specimens was measured by the 3-{4,5-dimethylthiazol-2yl}-2,5-diphenyltetrazolium bromide (MTT) test. Results of MTT assay were statistically analyzed by the two-way ANOVA test (P<.05). Post-hoc multiple comparisons were conducted using Tukey's tests. RESULTS. The amount of metal ions released by galvanic corrosion due to contact between the base metal alloy and titanium was increased in all of the specimens. In the cytotoxicity test, the two-way ANOVA showed a significant effect of the alloy type and galvanic corrosion for cytotoxicity (P<.001). The relative cell growth rate (RGR) was decreased further on the groups in contact with titanium (P<.05). CONCLUSION. The release of metal ions was increased by galvanic corrosion due to contact between base metal and titanium, and it can cause adverse effects on the tissue around the implant by inducing cytotoxicity.

Evaluation of effect of galvanic corrosion between nickel-chromium metal and titanium on ion release and cell toxicity

Jung-Yun Choi,Jae-Min Seo,Ju-Mi Park,Seung-Geun Ahn,Kwang-Yeob Song,Jung-Jin Lee 대한치과보철학회 2015 The Journal of Advanced Prosthodontics Vol.7 No.2

PURPOSE The purpose of this study was to evaluate cell toxicity due to ion release caused by galvanic corrosion as a result of contact between base metal and titanium. MATERIALS AND METHODS It was hypothesized that Nickel (Ni)-Chromium (Cr) alloys with different compositions possess different corrosion resistances when contacted with titanium abutment, and therefore in this study, specimens (10×10×1.5 mm) were fabricated using commercial pure titanium and 3 different types of Ni-Cr alloys (T3, Tilite, Bella bond plus) commonly used for metal ceramic restorations. The specimens were divided into 6 groups according to the composition of Ni-Cr alloy and contact with titanium. The experimental groups were in direct contact with titanium and the control groups were not. After the samples were immersed in the culture medium - Dulbecco's modified Eagle's medium[DMEM] for 48 hours, the released metal ions were detected using inductively coupled plasma mass spectrometer (ICP-MS) and analyzed by the Kruskal-Wallis and Mann-Whitney test (P<.05). Mouse L-929 fibroblast cells were used for cell toxicity evaluation. The cell toxicity of specimens was measured by the 3-{4,5-dimethylthiazol-2yl}-2,5-diphenyltetrazolium bromide (MTT) test. Results of MTT assay were statistically analyzed by the two-way ANOVA test (P<.05). Post-hoc multiple comparisons were conducted using Tukey's tests. RESULTS The amount of metal ions released by galvanic corrosion due to contact between the base metal alloy and titanium was increased in all of the specimens. In the cytotoxicity test, the two-way ANOVA showed a significant effect of the alloy type and galvanic corrosion for cytotoxicity (P<.001). The relative cell growth rate (RGR) was decreased further on the groups in contact with titanium (P<.05). CONCLUSION The release of metal ions was increased by galvanic corrosion due to contact between base metal and titanium, and it can cause adverse effects on the tissue around the implant by inducing cytotoxicity.

Corrosion release behavior of alloy 690 and its application in high-temperature water with Zn injection

Jiapeng Liao,Yousen Hu,Jinggang Li,Desheng Jin,Shuqi Meng,Tianming Ruan,Yisong Hu,Ziyu Zhang 한국원자력학회 2022 Nuclear Engineering and Technology Vol.54 No.3

Corrosion release behavior of Alloy 690 in high-temperature water was investigated under the conditionsof injected Zn concentrations of 0 ppb, 10 ppb and 50 ppb. A protective oxide film composed of Zn(FexCr1-x)2O4 and Cr2O3 was formed with Zn injection, resulting in a better corrosion resistance. In comparisonwith the Zn-free condition, the corrosion release rate under the Zn-injection conditions was smaller. Thecorrosion release inhibiting factors were 1.7 and 1.9 under the conditions of 10 ppb and 50 ppb Zninjectionrespectively. A foreseen application of the corrosion and corrosion release rates has beenproposed and discussed.