http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
양면발파법 및 다이아몬드 와이어쏘를 이용한 채석 시스템 연구
홍기표,류창하,선우춘,최병희,한공창 대한화약발파공학회 2000 화약발파 Vol.18 No.3
본 논문은 양면발파에 의한 채석기술에서 주로 양면발파 장약패턴 및 다이아몬드 와이어쏘절삭기술에 관한 내용을 중심으로, 현재 각 석재광산에서 시행하고 있는 채석기술과 연구소 에서 시행한 현장 시험발파 결과를 기술한 것이다. 첫째, DA석재광산에서는 제트버너를 이용하여 자유면을 형성하고, 일면발파법과 양면발파법의 작업시간을 비교한 결과 양면 발파할 때에 37%이상의 작업시간 절약효과가 있었으며, 인원은 36%이상의 감소효과가 있었다.둘째, DH석재광산에서는 다이아몬드 와이어쏘를 이용하여 자유면을 형성하고 양면발파 작 업시간과 타 광산에서 일반적으로 사용하고 있는 제트버너에 의한 양면발파 작업시간을 비교하였을 때에 21%이상의 절감효과가 있었고, 작업인원도 21%이상의 감소효과가 있었다. 다이아몬드 와이어쏘를 이용하여 양측면에 자유면을 형성하고 양면 발파하는 채석기술은 소음 및 분진에 의한 환경공해를 방지할 수 있었으며, 작업공정 및 경제성 면에서도 매우 유 리하나 실패시 다른 채석기술에 비해 모암의 손상으로 인한 경제적 손실이 커질 수 있다는 단점도 있으므로 정밀한 발파설계 및 기술이 필요하다.
건식 와이어쏘를 이용한 대단면 콘크리트 절단 성능 평가
천주현 ( Cheon Ju-hyun ),장지숙 ( Jang Ji-suk ),이혜영 ( Lee Hye-young ),이한민 ( Lee Han-min ),최영화 ( Choi Young-hwa ) 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.24 No.1
현재까지 다양한 분야에서 그 성능과 효율이 검증된 와이어 쏘(Diamond Wire Saw) 공법은 대단면 구조 형태로 설계/시공된 대형 건축물과 교량 및 원전 구조물 등의 철근콘크리트 절단해체에 많이 적용하고 있는 기술이라 할 수 있다. 관련하여 절단 해체 시 2차 오염수와 같은 폐기물들의 발생을 감소시키기 위한 기술 개발이 활발히 진행되고 있으며, 정량적 평가 방안을 통한 시험평가 및 검증은 필수적이라 할 수 있다. 본 연구에서는 대단면 RC구조물의 해체 절단 시 발생 되는 분진 발생량 최소화를 위하여 E.D.C.S(Eco Dry Cutting System) 공법(인영건설(주))을 적용하고 분진 발생량 감소를 위해 원전용 건식 다이아몬드 와이어 쏘를 적용한 절단 오차에 대한 시험평가를 수행하였다.
철근콘크리트 구조물 건식절단해체 공법의 소음 저감성능 평가
박기찬,김성칠 한국방재학회 2014 한국방재학회논문집 Vol.14 No.3
The dry cutting demolition method prevents basically the wastewater and sludge driven in cooling water when the structures are cutand broken up by a diamond wire saw. In addition to the environmental issues caused by coolant, noise is essential design factor indemolition process for the reinforced concrete structures. In this study, cutting test and sound field analysis were conducted to investigatethe noise performance of newly developed EDCS demolition method. The study results show that EDCS method is eco-friendlydry demolition method to decrease the noise pollution which can be suitable for multiplex facilities and structures in water pollutionprevention area. 다이어몬드 와이어쏘를 이용한 건식절단해체 공법은 습식절단해체공법에 비해 냉각수 및 슬러지에 의한 오염이 발생하지 않는다. 냉각수에 의한 오염문제와 더불어 소음은 철근콘크리트 구조물의 해체현장에서 중요한 환경설계변수이다. 이 연구에서는 최근 개발된EDCS 절단해체공법에 대한 소음성능을 확인하기 위해 절단실험 및 음장해석을 수행하였다. 성능평가결과 EDCS 절단해체공법에서발생하는 소음도가 기존 공랭식 건식절단해체공법에 비해 낮게 측정되어 도심지 구조물 해체공법에 유용하게 사용될 수 있을 것으로기대된다.
An Experimental Verification on the Development of an Innovative Diamond Wire Saw Cutting Technology
Jong Hyup Park(박종협),Baeksuk Chu(주백석) 한국기계가공학회 2018 한국기계가공학회지 Vol.17 No.6
This paper introduces a innovative diamond wire saw cutting technology and its experimental verification that can be utilized for cutting heavy structures. While conventional diamond wire saw cutting technologies such as water cooled cutting method and dry cutting method cause severe environmental problems due to generating massive concrete sludge or dust scattering, the proposed method can eliminate those problems considerably. Through extensive experiments using heavy structure test bed and real bridge pier structure, comprehensive analysis and comparative evaluation about various cutting methods were performed. As a result, the innovative diamond wire saw cutting method could achieve a similar cutting and cooling performance to the water cooled cutting method without generating concrete sludge and it showed an improved cutting and cooling performance to the dry cutting method without dust scattering. Consequently it is confirmed that the suggested cutting technology can be a promising environment-friendly alternative in the field of heavy structure dismantling.
태양전지용 실리콘 웨이퍼의 멀티 와이어 쏘잉 시 절삭저항력에 관한 연구
황인환(In-Hwan Hwang),박상현(Sang-Hyun Park),안국진(Kuk-Jin An),권대근(Geon-Dae Kwun),이종찬(Chan-Jong Lee) 한국기계가공학회 2016 한국기계가공학회지 Vol.15 No.3
Reducing the wafer breakage rate and sawing thinner wafers will decrease the cost of solar cells. This study was carried out in order to identify ways to achieve this goal. In this study, the cutting force characteristics using an ingot tilting-type diamond multi wire-sawing machine were analyzed. The cutting force was analyzed while varying the tilting angles and wire speed. The obtained data were analyzed by classifying the tangential cutting force and the normal cutting force. In this cutting force experiment, the difference between the forces was confirmed; it was found that it rises with increasing the tilting angles and decreases when the wire speed elevates. The resulting value can be utilized as basic data for the determination of an ideal cutting recipe.