http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Distribution of Factors Affecting Foreign Direct Investment in ASEAN Countries
Anh Thi Lan NGUYEN(Anh Thi Lan NGUYEN ),Chau Thi Minh PHAM(Chau Thi Minh PHAM ),Hanh Hong NGUYEN(Hanh Hong NGUYEN ),Dat Ngoc NGUYEN(Dat Ngoc NGUYEN ),Duy Van NGUYEN(Duy Van NGUYEN ) 한국유통과학회 2023 유통과학연구 Vol.21 No.2
Purpose: Research on attracting foreign direct investment plays an important role in ASEAN countries. ASEAN has needed FDI capital for development and integration with many developing countries. Research design, data and methodology: This study is conducted to assess the impact of factors: inflation (INF), economic growth (GDP), population (POP), and trade (TRADE) on attracting foreign direct investment (FDI) of ASEAN countries. The study will find out how factors distribution contributes to FDI attraction. The study collects data from 10 ASEAN countries from 2010 to 2020. With data collected for ten countries from 2010 to 2020, data analysis with panel data will be used in this study. The Regression with Driscoll-Kraay standard errors correction model will be used in the study. Results: Panel data analysis shows that economic growth and population positively impact FDI attraction in ASEAN countries. However, two factors: INF and TRADE, do not affect FDI. Conclusions: Countries need to focus on economic development, create many good conditions for people and domestic enterprises and create opportunities for foreign investors to pay more attention. improving the quality of domestic human resources will help to better improve the working quality factor when the demand for high-quality human resources increases.
Minh-Huy Dinh Dang,Trang Thi Thu Nguyen,Bao Quang Gia Le,Linh Ho Thuy Nguyen,Ngoc Xuan Dat Mai,My Van Nguyen,Phuong Hoang Tran,Tan Le Hoang Doan 한국공업화학회 2022 Journal of Industrial and Engineering Chemistry Vol.111 No.-
Pd-incorporated Zr-based metal–organic framework containing sulfone groups, named Pd(II)BUT-11, wassuccessfully prepared by dispersing the sulfone-functionalized MOF in Pd(OAc)2 solution. X-ray diffraction,scanning electron microscopy, N2 isotherm sorption, X-ray photoelectron spectroscopy, and thermogravimetricanalysis were applied to determine the features of the Pd-incorporated MOF. In the catalyticstudies, Pd(II)@BUT-11 was shown to be an efficient heterogeneous catalyst for synthesizing various stilbenederivatives via the cross-coupling Heck reaction with DABCO-derived deep eutectic solvent (DES) asa green solvent. Notably, the catalyst and the solvent could be recovered and reused, with their activityand structure remaining stable throughout several trials. The method provides an alternative solution tothe conventional catalysts and solvents, resulting in a green and efficient stilbene synthesis process. Furthermore, the stilbenes were separated by extraction with ethyl acetate due to the low solubility ofDES with this solvent.
Topology optimization with functionally graded multi-material for elastic buckling criteria
Minh-Ngoc Nguyen,Dongkyu Lee,Joowon Kang,Soomi Shin 국제구조공학회 2023 Steel and Composite Structures, An International J Vol.46 No.1
This research presents a multi-material topology optimization for functionally graded material (FGM) and nonFGM with elastic buckling criteria. The elastic buckling based multi-material topology optimization of functionally graded steels (FGSs) uses a Jacobi scheme and a Method of Moving Asymptotes (MMA) as an expansion to revise the design variables shown first. Moreover, mathematical expressions for modified interpolation materials in the buckling framework are also described in detail. A Solid Isotropic Material with Penalization (SIMP) as well as a modified penalizing material model is utilized. Based on this investigation on the buckling constraint with homogenization material properties, this method for determining optimal shape is presented under buckling constraint parameters with non-homogenization material properties. For optimal problems, minimizing structural compliance like as an objective function is related to a given material volume and a buckling load factor. In this study, conflicts between structural stiffness and stability which cause an unfavorable effect on the performance of existing optimization procedures are reduced. A few structural design features illustrate the effectiveness and adjustability of an approach and provide some ideas for further expansions.
Carbon-Nanotube Growth over Iron Nanoparticles Formed on CaCO3 Support by Using Hydrogen Reduction
Nguyen Duc Dung,Nguyen Van Chuc,Ngo Thi Thanh Tam,Nguyen Hong Quang,Phan Hong Khoi,Phan Ngoc Minh 한국물리학회 2008 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.52 No.5
Carbon nanotubes (CNTs) were grown by chemical vapor deposition on a mixture of iron salt and CaCO3. Salt mixtures of Fe(NO₃)₃9H₂O/CaCO₃ and FeCl₃6H₂O/CaCO₃ with various Fe weight contents were used as catalysts for growing the CNTs. A scanning electron microscope study revealed that the CNTs were densely grown on the Fe(NO₃)₃9H₂O/CaCO₃ catalyst containing 5 wt.% Fe. The effect of growth temperature on the segregation of Fe nanoparticles formed by hydrogen reduction is discussed. The result shows that 800 ℃ is the optimal temperature for the formation of Fe nanoparticles over which CNTs grow with the highest yield of 78.61 %. A raman spectroscope and a scanning transmission electron microscope were utilized to characterize the multiwall structure of the CNTs. The 92.16 % purity of the CNTs was determined by using thermal gravimetric analysis. Carbon nanotubes (CNTs) were grown by chemical vapor deposition on a mixture of iron salt and CaCO3. Salt mixtures of Fe(NO₃)₃9H₂O/CaCO₃ and FeCl₃6H₂O/CaCO₃ with various Fe weight contents were used as catalysts for growing the CNTs. A scanning electron microscope study revealed that the CNTs were densely grown on the Fe(NO₃)₃9H₂O/CaCO₃ catalyst containing 5 wt.% Fe. The effect of growth temperature on the segregation of Fe nanoparticles formed by hydrogen reduction is discussed. The result shows that 800 ℃ is the optimal temperature for the formation of Fe nanoparticles over which CNTs grow with the highest yield of 78.61 %. A raman spectroscope and a scanning transmission electron microscope were utilized to characterize the multiwall structure of the CNTs. The 92.16 % purity of the CNTs was determined by using thermal gravimetric analysis.
( Minh Ngoc Nghiem ),( Bac Van Nguyen ),( Son Thai Nguyen ),( Thuy Thi Bich Vo ),( Hai Van Nong ) 한국미생물 · 생명공학회 2015 Journal of microbiology and biotechnology Vol.25 No.5
Tuberculosis (TB) is the most common mycobacterial infection in developing countries, requiring a rapid, accurate, and well-differentiated detection/diagnosis. For the rapid detection and discrimination of Mycobacterium tuberculosis complex (MTC) from nontuberculous mycobacteria (NTM), a novel, simple, and primer-combined single-step multiplex PCR using three primer pairs (6110F-6110R, 1081F-1081R, and 23SF-23SR; annealing on each of IS6110, IS1081, and 23S rDNA targets), hereafter referred to as a triplex PCR, has been developed and evaluated. The expected product for IS6110 is 416 bp, for IS1081 is 300 bp, and for 23S rDNA is 206 bp by single PCR, which was used to verify the specificity of primers and the identity of MTC using DNA extracted from the M. tuberculosis H37Rv reference strain (ATCC, USA) and other mycobacteria other than tuberculosis (MOTT) templates. The triplex PCR assay showed 100% specificity and 96% sensitivity; the limit of detection for mycobacteria was ~100 fg; and it failed to amplify any target from DNA of MOTT (50 samples tested). Of 307 blinded clinical samples, overall 205 positive M. tuberculosis samples were detected by single PCR, 142 by conventional culture, and 90 by AFB smear methods. Remarkably, the triplex PCR could subsequently detect 55 positive M. tuberculosis from 165 culture-negative and 115 from 217 AFB smear-negative samples. The triplex PCR, targeting three regions in the M. tuberculosis genome, has proved to be an efficient tool for increasing positive detection/ discrimination of this bacterium from clinical samples.
Reduced-Pipelined Duty Cycle MAC Protocol (RP-MAC) for Wireless Sensor Network
( Ngoc Minh Nguyen ),( Myung Kyun Kim ) 한국인터넷정보학회 2017 KSII Transactions on Internet and Information Syst Vol.11 No.5
Recently, the pipeline-forwarding has been proposed as a new technique to resolve the end-to-end latency problem of the duty-cycle MAC protocols in Wireless Sensor Networks (WSNs). Some protocols based on this technique such as PMAC and PRI-MAC have shown an improvement not only in terms of reducing end-to-end latency but also in terms of reducing power consumption. In these protocols, however, the sensor nodes still waste a significant amount of energy for unnecessary idle listening during contention period of upstream nodes to check the channel activity. This paper proposes a new pipeline-forwarding duty-cycle MAC protocol, named RP-MAC (Reduced Pipelined duty-cycle MAC), which tries to reduce the waste of energy. By taking advantage of ACK mechanism and shortening the handshaking procedure, RP-MAC minimizes the time for checking the channel and therefore reduces the energy consumption due to unnecessary idle listening. When comparing RP-MAC with the existing solution PRI-MAC and RMAC, our QualNet-based simulation results show a significant improvement in term of energy consumption.