http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박종혁,Park, Jong-Hyeok 한국항공우주산업진흥협회 2006 航空宇宙 Vol.91 No.-
어느 나라에서든지 항공기를 운용하려면 그 나라 항공당국의 관리와 감독을 받아야 한다. 이러한 관리와 감독은 공공의 안전을 위하여 국가기관인 항공당국에서 법적으로 위임받아 수행하는 것이다. 우리나라의 경우 건설교통부산하 항공안전본부와 지방항공청에서 그 기능을 담당한다. 이러한 관리와 감독은 주로 항공기, 항공종사자, 운항조직, 정비조직 등을 대상으로 이루어지며 등록, 제증명, 면허 등과 같은 증명활동, 감독활동, 위반 사항에 대한 법적 제재 등과 같은 수단을 통해 이루어진다. 따라서 항공기를 도입하여 운항하려는 자는 사업계획 단계에서부터 우리나라의 항공안전 관리감독과 관련된 제반 법규와 절차를 사전에 충분히 이해하고 대비하여야 시행착오를 줄이고 시간과 금전적인 손실을 예비할 수 있을 것이다. 여기에선 항공기에 국한하여 항공기 도입과 관련된 항공기 인증제도와 그에 따른 법절차에 대해 설명하고자 한다.
고분자 전해질 연료전지 및 수전해용 촉매층의 이오노머 바인더
박종혁,마하무다아크테르,김범석,정다혜,이민영,신지윤,박진수,Park, Jong-Hyeok,Akter, Mahamuda,Kim, Beom-Seok,Jeong, Dahye,Lee, Minyoung,Shin, Jiyun,Park, Jin-Soo 한국전기화학회 2022 한국전기화학회지 Vol.25 No.4
Polymer electrolyte fuel cells and water electrolysis are attracting attention in terms of high energy density and high purity hydrogen production. The catalyst layer for the polymer electrolyte fuel cell and water electrolysis is a porous electrode composed of a precious metal-based electrocatalyst and an ionomer binder. Among them, the ionomer binder plays an important role in the formation of a three-dimensional network for ion conduction in the catalyst layer and the formation of pores for the movement of materials required or generated for the electrode reaction. In terms of the use of commercial perfluorinated ionomers, the content of the ionomer, the physical properties of the ionomer, and the type of the dispersing solvent system greatly determine the performance and durability of the catalyst layer. Until now, many studies have been reported on the method of using an ionomer for the catalyst layer for polymer electrolyte fuel cells. This review summarizes the research results on the use of ionomer binders in the fuel cell aspect reported so far, and aims to provide useful information for the research on the ionomer binder for the catalyst layer, which is one of the key elements of polymer electrolyte water electrolysis to accelerate the hydrogen economy era.
활성이온식각법에 의한 Y-Ba-Cu-O고온초전도 박막의 미세선 제작
박종혁,한택상,김영환,최상삼,Park, Jong-Hyeok,Han, Taek-Sang,Kim, Yeong-Hwan,Choe, Sang-Sam 한국재료학회 1993 한국재료학회지 Vol.3 No.2
In situ on-axis rf magnetron sputtering 방법으로 $Y_1$B$a_2$C${u_4}\;{_2O_x}$의 비화학 양론적인 타게트를 사용하여 $T_c$, $_{zero}$/-88.2K, ${\Delta}{T_c}$, <1.5K의 고온초전도 박막을 제조하고, 활성이온식각법으로 이 박막을 patterning하여 그 특성을 조사하였다. 제조된 패턴은 깨끗한 경계면을 가지고 있음이 관찰되었으며, 패턴 폭이 5${\mu}$m에서 2${\mu}$m로 좁아짐에 따라 임계온도와 임계전류밀도의 특성저하가 나타났으나, 그 저하폭이 크지 않아 소자로서 응용하기에 충분한 특성을 가지고 있음을 확인하였다. 한편 RIE방법에 의하여 미크론 이하의 선폭 제조가능성을 확인하였다. Abstract We have fabricated Y-Ba-Cu-O superconducting thin films by in-situ on-axis rf magnetron sputtering method using $Y_1$B$a_2$C${u_4}\;{_2O_x}$ nonstoichiometric target. Reactive ion etching (RIE) method was used in patterning the films. We have investigated the properties of patterned films, and compared the properties of the films before and after patterning. As the line width of the pattern decreases from 5${\mu}$m to 2${\mu}$m, a slight but not significant degradation in superconducting properties of the patterned films is observed. The bridge patterns are found to have clean edges and good electrical properties enough to be applied in device applications. From the result of this research, the possibility of submicron patterning by RlE is confirmed.
전기화학적 산화를 위한 삼원 전이 금속 코팅 불용성 산화 전극 제조에 관한 연구
박종혁 ( Jong-hyeok Park ),최장욱 ( Jang-uk Choi ),박진수 ( Jin-soo Park ) 한국공업화학회 2021 공업화학 Vol.32 No.4
불용성 산화 전극은 전기화학적 수처리 공정에 있어 가장 핵심적인 소재이며, 이를 이용하여 난분해성 유기물질을 분해하는 방법으로 많은 연구가 진행되어 왔다. 이러한 불용성 산화 전극 제조에 있어 금속 기판 표면에 코팅하는 금속 촉매의 종류, 코팅 방식, 소결 방법 등의 다양한 제조 변수가 불용성 산화 전극의 성능 및 내구성에 영향을 미친다. 본 연구에서는 Ir-Ru-Ta 삼원 금속 코팅을 활용하여 동일한 전 처리 및 소결 조건에서 코팅 방법에 따라 불용성 산화 전극을 제조하고 이의 성능과 내구성을 연구하였다. 코팅 방식은 브러쉬 및 스프레이 코팅법을 활용하였으며, 그 결과 최적화된 스프레이 코팅 조건에서 동일한 촉매 잉크양으로 더 많은 금속을 Ti 기판 표면에 코팅이 가능하여 촉매 잉크 저감이 가능한 것을 확인하였다. 또한, 전극 표면의 갈라짐 현상 및 삼원 금속의 균일한 도포에 의해 스프레이 코팅법으로 제조한 Spray_2.0_3.0 전극이 가장 높은 전기화학적 활성 비표면적을 보여주었으며, 4-chlorophenol의 분해 성능이 타 전극에 비해 우수한 것으로 나타났다. 하지만, 불용성 산화전극의 내구성은 전극의 코팅방법에 따라 큰 차이가 없는 것으로 나타났다. Dimensionally stable electrodes are one of the important components in electrochemical water treatment processes. In the manufacturing of the dimensionally stable electrodes, the type of metal catalyst coated on the surface of the metal substrate, the coating and sintering methods substantially influence their performance and durability. In this study, using Ir-Ru-Ta ternary metal coating, various electrodes were prepared depending on the coating method under the same pre-treatment and sintering conditions, and its performance and durability were studied. As a coating method, brush and spray coating were used. As a result, the reduction in the amount of catalyst ink was achieved because more amount of metal could be coated for the electrode using spraying with the same amount of catalyst ink. In addition, the spray_2.0_3.0 electrode prepared by a specific spray coating method shows the phenomenon of cracking and the uniform coating of the ternary metal on the surface of the coating layer, and results in a high electrochemically active specific surface area, and the decomposition performance of 4-chlorophenol was superior to the other electrodes. However, it was found that there was no significant difference in durability depending on the coating method.